diff mbox series

[24/40] rtw88: 8723d: add interface configurations table

Message ID 20200417074653.15591-25-yhchuang@realtek.com
State New
Headers show
Series [01/40] rtw88: 8723d: Add basic chip capabilities | expand

Commit Message

Tony Chuang April 17, 2020, 7:46 a.m. UTC 
From: Ping-Ke Shih <pkshih@realtek.com>

Interface configuration table is used to configure PCI PHY that are
normally decided by design or bootstrap pin, and driver can do additional
settings by this table.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
---
 drivers/net/wireless/realtek/rtw88/rtw8723d.c | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtw88/rtw8723d.c b/drivers/net/wireless/realtek/rtw88/rtw8723d.c
index dd8943426bb3..cf897af380c1 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8723d.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8723d.c
@@ -1072,6 +1072,26 @@  static const struct rtw_rqpn rqpn_table_8723d[] = {
 	 RTW_DMA_MAPPING_EXTRA, RTW_DMA_MAPPING_HIGH},
 };
 
+static const struct rtw_intf_phy_para pcie_gen1_param_8723d[] = {
+	{0x0008, 0x4a22,
+	 RTW_IP_SEL_PHY,
+	 RTW_INTF_PHY_CUT_ALL,
+	 RTW_INTF_PHY_PLATFORM_ALL},
+	{0x0009, 0x1000,
+	 RTW_IP_SEL_PHY,
+	 ~(RTW_INTF_PHY_CUT_A | RTW_INTF_PHY_CUT_B),
+	 RTW_INTF_PHY_PLATFORM_ALL},
+	{0xFFFF, 0x0000,
+	 RTW_IP_SEL_PHY,
+	 RTW_INTF_PHY_CUT_ALL,
+	 RTW_INTF_PHY_PLATFORM_ALL},
+};
+
+static const struct rtw_intf_phy_para_table phy_para_table_8723d = {
+	.gen1_para	= pcie_gen1_param_8723d,
+	.n_gen1_para	= ARRAY_SIZE(pcie_gen1_param_8723d),
+};
+
 static const struct rtw_hw_reg rtw8723d_dig[] = {
 	[0] = { .addr = 0xc50, .mask = 0x7f },
 	[1] = { .addr = 0xc50, .mask = 0x7f },
@@ -1122,6 +1142,7 @@  struct rtw_chip_info rtw8723d_hw_spec = {
 	.pwr_off_seq = card_disable_flow_8723d,
 	.page_table = page_table_8723d,
 	.rqpn_table = rqpn_table_8723d,
+	.intf_table = &phy_para_table_8723d,
 	.dig = rtw8723d_dig,
 	.dig_cck = rtw8723d_dig_cck,
 	.rf_sipi_addr = {0x840, 0x844},