@@ -63,13 +63,14 @@ static int _rtl92e_pci_probe(struct pci_dev *pdev,
static void _rtl92e_pci_disconnect(struct pci_dev *pdev);
static irqreturn_t _rtl92e_irq(int irq, void *netdev);
+static SIMPLE_DEV_PM_OPS(rtl92e_pm_ops, rtl92e_suspend, rtl92e_resume);
+
static struct pci_driver rtl8192_pci_driver = {
.name = DRV_NAME, /* Driver name */
.id_table = rtl8192_pci_id_tbl, /* PCI_ID table */
.probe = _rtl92e_pci_probe, /* probe fn */
.remove = _rtl92e_pci_disconnect, /* remove fn */
- .suspend = rtl92e_suspend, /* PM suspend fn */
- .resume = rtl92e_resume, /* PM resume fn */
+ .driver.pm = &rtl92e_pm_ops,
};
static short _rtl92e_is_tx_queue_empty(struct net_device *dev);
@@ -10,9 +10,9 @@
#include "rtl_pm.h"
-int rtl92e_suspend(struct pci_dev *pdev, pm_message_t state)
+int rtl92e_suspend(struct device *dev_d)
{
- struct net_device *dev = pci_get_drvdata(pdev);
+ struct net_device *dev = dev_get_drvdata(dev_d);
struct r8192_priv *priv = rtllib_priv(dev);
u32 ulRegRead;
@@ -46,40 +46,28 @@ int rtl92e_suspend(struct pci_dev *pdev, pm_message_t state)
out_pci_suspend:
netdev_info(dev, "WOL is %s\n", priv->rtllib->bSupportRemoteWakeUp ?
"Supported" : "Not supported");
- pci_save_state(pdev);
- pci_disable_device(pdev);
- pci_enable_wake(pdev, pci_choose_state(pdev, state),
- priv->rtllib->bSupportRemoteWakeUp ? 1 : 0);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ device_set_wakeup_enable(dev_d, priv->rtllib->bSupportRemoteWakeUp);
mdelay(20);
return 0;
}
-int rtl92e_resume(struct pci_dev *pdev)
+int rtl92e_resume(struct device *dev_d)
{
- struct net_device *dev = pci_get_drvdata(pdev);
+ struct pci_dev *pdev = to_pci_dev(dev_d);
+ struct net_device *dev = dev_get_drvdata(dev_d);
struct r8192_priv *priv = rtllib_priv(dev);
- int err;
u32 val;
netdev_info(dev, "================>r8192E resume call.\n");
- pci_set_power_state(pdev, PCI_D0);
-
- err = pci_enable_device(pdev);
- if (err) {
- netdev_err(dev, "pci_enable_device failed on resume\n");
- return err;
- }
- pci_restore_state(pdev);
pci_read_config_dword(pdev, 0x40, &val);
if ((val & 0x0000ff00) != 0)
pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
- pci_enable_wake(pdev, PCI_D0, 0);
+ device_wakeup_disable(dev_d);
if (priv->polling_timer_on == 0)
rtl92e_check_rfctrl_gpio_timer(&priv->gpio_polling_timer);
@@ -10,7 +10,7 @@
#include <linux/types.h>
#include <linux/pci.h>
-int rtl92e_suspend(struct pci_dev *dev, pm_message_t state);
-int rtl92e_resume(struct pci_dev *dev);
+int rtl92e_suspend(struct device *dev_d);
+int rtl92e_resume(struct device *dev_d);
#endif
The structure of working of PM hooks for source files is: drivers/staging/rtl8192e/rtl8192e/rtl_pm.h : callbacks declared drivers/staging/rtl8192e/rtl8192e/rtl_pm.c : callbacks defined drivers/staging/rtl8192e/rtl8192e/rtl_core.c : callbacks used Drivers should not use legacy power management as they have to manage power states and related operations, for the device, themselves. This driver was handling them with the help of PCI helper functions like pci_save/restore_state(), pci_enable/disable_device(), etc. With generic PM, all essentials will be handled by the PCI core. Driver needs to do only device-specific operations. The driver was also using pci_enable_wake(...,..., 0) to disable wake. Use device_wakeup_disable() instead. Use device_set_wakeup_enable() where WOL is decided by the value of a variable during runtime. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> --- drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 5 ++-- drivers/staging/rtl8192e/rtl8192e/rtl_pm.c | 26 ++++++-------------- drivers/staging/rtl8192e/rtl8192e/rtl_pm.h | 4 +-- 3 files changed, 12 insertions(+), 23 deletions(-)