[v3,1/2] net: phy: make phy_disable_interrupts() non-static

Message ID 20200624112547.3caf4d61@xhacker.debian
State New
Headers show
Series
  • [v3,1/2] net: phy: make phy_disable_interrupts() non-static
Related show

Commit Message

Jisheng Zhang June 24, 2020, 3:25 a.m.
We face an issue with rtl8211f, a pin is shared between INTB and PMEB,
and the PHY Register Accessible Interrupt is enabled by default, so
the INTB/PMEB pin is always active in polling mode case.

As Heiner pointed out "I was thinking about calling
phy_disable_interrupts() in phy_init_hw(), to have a defined init
state as we don't know in which state the PHY is if the PHY driver is
loaded. We shouldn't assume that it's the chip power-on defaults, BIOS
or boot loader could have changed this. Or in case of dual-boot
systems the other OS could leave the PHY in whatever state."

Make phy_disable_interrupts() non-static so that it could be used in
phy_init_hw() to have a defined init state.

Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
---
 drivers/net/phy/phy.c | 2 +-
 include/linux/phy.h   | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

Patch

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 1de3938628f4..56cfae950472 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -840,7 +840,7 @@  static void phy_error(struct phy_device *phydev)
  * phy_disable_interrupts - Disable the PHY interrupts from the PHY side
  * @phydev: target phy_device struct
  */
-static int phy_disable_interrupts(struct phy_device *phydev)
+int phy_disable_interrupts(struct phy_device *phydev)
 {
 	int err;
 
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 8c05d0fb5c00..b693b609b2f5 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1416,6 +1416,7 @@  int phy_ethtool_ksettings_set(struct phy_device *phydev,
 int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd);
 int phy_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
 int phy_do_ioctl_running(struct net_device *dev, struct ifreq *ifr, int cmd);
+int phy_disable_interrupts(struct phy_device *phydev);
 void phy_request_interrupt(struct phy_device *phydev);
 void phy_free_interrupt(struct phy_device *phydev);
 void phy_print_status(struct phy_device *phydev);