diff mbox series

[v2,net-next,06/13] net: dsa: felix: create a template for the DSA tags on xmit

Message ID 20200530115142.707415-7-olteanv@gmail.com
State New
Headers show
Series New DSA driver for VSC9953 Seville switch | expand

Commit Message

Vladimir Oltean May 30, 2020, 11:51 a.m. UTC
From: Vladimir Oltean <vladimir.oltean@nxp.com>

With this patch we try to kill 2 birds with 1 stone.

First of all, some switches that use tag_ocelot.c don't have the exact
same bitfield layout for the DSA tags. The destination ports field is
different for Seville VSC9953 for example. So the choices are to either
duplicate tag_ocelot.c into a new tag_seville.c (sub-optimal) or somehow
take into account a supposed ocelot->dest_ports_offset when packing this
field into the DSA injection header (again not ideal).

Secondly, tag_ocelot.c already needs to memset a 128-bit area to zero
and call some packing() functions of dubious performance in the
fastpath. And most of the values it needs to pack are pretty much
constant (BYPASS=1, SRC_PORT=CPU, DEST=port index). So it would be good
if we could improve that.

The proposed solution is to allocate a memory area per port at probe
time, initialize that with the statically defined bits as per chip
hardware revision, and just perform a simpler memcpy in the fastpath.

Other alternatives have been analyzed, such as:
- Create a separate tag_seville.c: too much code duplication for just 1
  bit field difference.
- Create a separate DSA_TAG_PROTO_SEVILLE under tag_ocelot.c, just like
  tag_brcm.c, which would have a separate .xmit function. Again, too
  much code duplication for just 1 bit field difference.
- Allocate the template from the init function of the tag_ocelot.c
  module, instead of from the driver: couldn't figure out a method of
  accessing the correct port template corresponding to the correct
  tagger in the .xmit function.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Changes in v2:
Created a function pointer such that Seville could reuse more code.

 drivers/net/dsa/ocelot/felix.c         | 13 +++++++++++++
 drivers/net/dsa/ocelot/felix.h         |  1 +
 drivers/net/dsa/ocelot/felix_vsc9959.c | 20 ++++++++++++++++++++
 include/soc/mscc/ocelot.h              |  2 ++
 net/dsa/tag_ocelot.c                   | 21 ++++++++-------------
 5 files changed, 44 insertions(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index 80b0735d680e..0346697bed3f 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -502,6 +502,7 @@  static int felix_init_structs(struct felix *felix, int num_phys_ports)
 	for (port = 0; port < num_phys_ports; port++) {
 		struct ocelot_port *ocelot_port;
 		struct regmap *target;
+		u8 *template;
 
 		ocelot_port = devm_kzalloc(ocelot->dev,
 					   sizeof(struct ocelot_port),
@@ -527,10 +528,22 @@  static int felix_init_structs(struct felix *felix, int num_phys_ports)
 			return PTR_ERR(target);
 		}
 
+		template = devm_kzalloc(ocelot->dev, OCELOT_TAG_LEN,
+					GFP_KERNEL);
+		if (!template) {
+			dev_err(ocelot->dev,
+				"Failed to allocate memory for DSA tag\n");
+			kfree(port_phy_modes);
+			return -ENOMEM;
+		}
+
 		ocelot_port->phy_mode = port_phy_modes[port];
 		ocelot_port->ocelot = ocelot;
 		ocelot_port->target = target;
+		ocelot_port->xmit_template = template;
 		ocelot->ports[port] = ocelot_port;
+
+		felix->info->xmit_template_populate(ocelot, port);
 	}
 
 	kfree(port_phy_modes);
diff --git a/drivers/net/dsa/ocelot/felix.h b/drivers/net/dsa/ocelot/felix.h
index a891736ca006..2f28c28fdef0 100644
--- a/drivers/net/dsa/ocelot/felix.h
+++ b/drivers/net/dsa/ocelot/felix.h
@@ -40,6 +40,7 @@  struct felix_info {
 				 enum tc_setup_type type, void *type_data);
 	void	(*port_sched_speed_set)(struct ocelot *ocelot, int port,
 					u32 speed);
+	void	(*xmit_template_populate)(struct ocelot *ocelot, int port);
 };
 
 extern struct felix_info		felix_info_vsc9959;
diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index bdc805686196..554f24fa6ff9 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -8,6 +8,7 @@ 
 #include <soc/mscc/ocelot_ptp.h>
 #include <soc/mscc/ocelot_sys.h>
 #include <soc/mscc/ocelot.h>
+#include <linux/packing.h>
 #include <net/pkt_sched.h>
 #include <linux/iopoll.h>
 #include <linux/pci.h>
@@ -1446,6 +1447,24 @@  static int vsc9959_port_setup_tc(struct dsa_switch *ds, int port,
 	}
 }
 
+static void vsc9959_xmit_template_populate(struct ocelot *ocelot, int port)
+{
+	struct ocelot_port *ocelot_port = ocelot->ports[port];
+	u8 *template = ocelot_port->xmit_template;
+	u64 bypass, dest, src;
+
+	/* Set the source port as the CPU port module and not the
+	 * NPI port
+	 */
+	src = ocelot->num_phys_ports;
+	dest = BIT(port);
+	bypass = true;
+
+	packing(template, &bypass, 127, 127, OCELOT_TAG_LEN, PACK, 0);
+	packing(template, &dest,    68,  56, OCELOT_TAG_LEN, PACK, 0);
+	packing(template, &src,     46,  43, OCELOT_TAG_LEN, PACK, 0);
+}
+
 struct felix_info felix_info_vsc9959 = {
 	.target_io_res		= vsc9959_target_io_res,
 	.port_io_res		= vsc9959_port_io_res,
@@ -1472,4 +1491,5 @@  struct felix_info felix_info_vsc9959 = {
 	.prevalidate_phy_mode	= vsc9959_prevalidate_phy_mode,
 	.port_setup_tc          = vsc9959_port_setup_tc,
 	.port_sched_speed_set   = vsc9959_sched_speed_set,
+	.xmit_template_populate	= vsc9959_xmit_template_populate,
 };
diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
index 8e6c13d99ced..1a87a3a32616 100644
--- a/include/soc/mscc/ocelot.h
+++ b/include/soc/mscc/ocelot.h
@@ -549,6 +549,8 @@  struct ocelot_port {
 	u8				ts_id;
 
 	phy_interface_t			phy_mode;
+
+	u8				*xmit_template;
 };
 
 struct ocelot {
diff --git a/net/dsa/tag_ocelot.c b/net/dsa/tag_ocelot.c
index b0c98ee4e13b..42f327c06dca 100644
--- a/net/dsa/tag_ocelot.c
+++ b/net/dsa/tag_ocelot.c
@@ -137,11 +137,10 @@  static struct sk_buff *ocelot_xmit(struct sk_buff *skb,
 				   struct net_device *netdev)
 {
 	struct dsa_port *dp = dsa_slave_to_port(netdev);
-	u64 bypass, dest, src, qos_class, rew_op;
 	struct dsa_switch *ds = dp->ds;
-	int port = dp->index;
 	struct ocelot *ocelot = ds->priv;
-	struct ocelot_port *ocelot_port = ocelot->ports[port];
+	struct ocelot_port *ocelot_port;
+	u64 qos_class, rew_op;
 	u8 *injection;
 
 	if (unlikely(skb_cow_head(skb, OCELOT_TAG_LEN) < 0)) {
@@ -149,19 +148,15 @@  static struct sk_buff *ocelot_xmit(struct sk_buff *skb,
 		return NULL;
 	}
 
-	injection = skb_push(skb, OCELOT_TAG_LEN);
+	ocelot_port = ocelot->ports[dp->index];
 
-	memset(injection, 0, OCELOT_TAG_LEN);
+	injection = skb_push(skb, OCELOT_TAG_LEN);
 
-	/* Set the source port as the CPU port module and not the NPI port */
-	src = ocelot->num_phys_ports;
-	dest = BIT(port);
-	bypass = true;
+	memcpy(injection, ocelot_port->xmit_template, OCELOT_TAG_LEN);
+	/* Fix up the fields which are not statically determined
+	 * in the template
+	 */
 	qos_class = skb->priority;
-
-	packing(injection, &bypass,   127, 127, OCELOT_TAG_LEN, PACK, 0);
-	packing(injection, &dest,      68,  56, OCELOT_TAG_LEN, PACK, 0);
-	packing(injection, &src,       46,  43, OCELOT_TAG_LEN, PACK, 0);
 	packing(injection, &qos_class, 19,  17, OCELOT_TAG_LEN, PACK, 0);
 
 	if (ocelot->ptp && (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {