@@ -24,8 +24,8 @@ config NET_DSA_MV88E6XXX_PTP
bool "PTP support for Marvell 88E6xxx"
default n
depends on NET_DSA_MV88E6XXX_GLOBAL2
+ depends on PTP_1588_CLOCK
imply NETWORK_PHY_TIMESTAMPING
- imply PTP_1588_CLOCK
help
Say Y to enable PTP hardware timestamping on Marvell 88E6xxx switch
chips that support it.
@@ -20,6 +20,7 @@ tristate "NXP SJA1105 Ethernet switch family support"
config NET_DSA_SJA1105_PTP
bool "Support for the PTP clock on the NXP SJA1105 Ethernet switch"
depends on NET_DSA_SJA1105
+ depends on PTP_1588_CLOCK
help
This enables support for timestamping and PTP clock manipulations in
the SJA1105 DSA driver.
@@ -35,8 +35,8 @@ config MACB
config MACB_USE_HWSTAMP
bool "Use IEEE 1588 hwstamp"
depends on MACB
+ depends on PTP_1588_CLOCK
default y
- imply PTP_1588_CLOCK
---help---
Enable IEEE 1588 Precision Time Protocol (PTP) support for MACB.
@@ -54,7 +54,7 @@ config THUNDER_NIC_RGX
config CAVIUM_PTP
tristate "Cavium PTP coprocessor as PTP clock"
depends on 64BIT && PCI
- imply PTP_1588_CLOCK
+ depends on PTP_1588_CLOCK
---help---
This driver adds support for the Precision Time Protocol Clocks and
Timestamping coprocessor (PTP) found on Cavium processors.
@@ -90,9 +90,8 @@ config TI_CPTS
config TI_CPTS_MOD
tristate
depends on TI_CPTS
+ depends on PTP_1588_CLOCK
default y if TI_CPSW=y || TI_KEYSTONE_NETCP=y || TI_CPSW_SWITCHDEV=y
- select NET_PTP_CLASSIFY
- imply PTP_1588_CLOCK
default m
config TI_K3_AM65_CPSW_NUSS
Commit d1cbfd771ce8 ("ptp_clock: Allow for it to be optional") changed all PTP-capable Ethernet drivers from `select PTP_1588_CLOCK` to `imply PTP_1588_CLOCK`, "in order to break the hard dependency between the PTP clock subsystem and ethernet drivers capable of being clock providers." As a result it is possible to build PTP-capable Ethernet drivers without the PTP subsystem by deselecting PTP_1588_CLOCK. Drivers are required to handle the missing dependency gracefully. Some PTP-capable Ethernet drivers (e.g., TI_CPSW) factor their PTP code out into separate drivers (e.g., TI_CPTS_MOD). The above commit also changed these PTP-specific drivers to `imply PTP_1588_CLOCK`, making it possible to build them without the PTP subsystem. But as Grygorii Strashko noted in [1]: On Wed, Apr 22, 2020 at 02:16:11PM +0300, Grygorii Strashko wrote: > Another question is that CPTS completely nonfunctional in this case and > it was never expected that somebody will even try to use/run such > configuration (except for random build purposes). In my view, enabling a PTP-specific driver without the PTP subsystem is a configuration error made possible by the above commit. Kconfig should not allow users to create a configuration with missing dependencies that results in "completely nonfunctional" drivers. I audited all network drivers that call ptp_clock_register() but merely `imply PTP_1588_CLOCK` and found five PTP-specific drivers that are likely nonfunctional without PTP_1588_CLOCK: NET_DSA_MV88E6XXX_PTP NET_DSA_SJA1105_PTP MACB_USE_HWSTAMP CAVIUM_PTP TI_CPTS_MOD Note how these symbols all reference PTP or timestamping in their name; this is a clue that they depend on PTP_1588_CLOCK. Change them from `imply PTP_1588_CLOCK` [2] to `depends on PTP_1588_CLOCK`. I'm not using `select PTP_1588_CLOCK` here because PTP_1588_CLOCK has its own dependencies, which `select` would not transitively apply. Additionally, remove the `select NET_PTP_CLASSIFY` from CPTS_TI_MOD; PTP_1588_CLOCK already selects that. [1]: https://lore.kernel.org/lkml/c04458ed-29ee-1797-3a11-7f3f560553e6@ti.com/ [2]: NET_DSA_SJA1105_PTP had never declared any type of dependency on PTP_1588_CLOCK (`imply` or otherwise); adding a `depends on PTP_1588_CLOCK` here seems appropriate. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: d1cbfd771ce8 ("ptp_clock: Allow for it to be optional") Signed-off-by: Clay McClure <clay@daemons.net> --- drivers/net/dsa/mv88e6xxx/Kconfig | 2 +- drivers/net/dsa/sja1105/Kconfig | 1 + drivers/net/ethernet/cadence/Kconfig | 2 +- drivers/net/ethernet/cavium/Kconfig | 2 +- drivers/net/ethernet/ti/Kconfig | 3 +-- 5 files changed, 5 insertions(+), 5 deletions(-)