diff mbox series

[net-next] net: ethernet: fec: Prevent MII event after MII_SPEED write

Message ID 20200428175833.30517-1-andrew@lunn.ch
State New
Headers show
Series [net-next] net: ethernet: fec: Prevent MII event after MII_SPEED write | expand

Commit Message

Andrew Lunn April 28, 2020, 5:58 p.m. UTC
The change to polled IO for MDIO completion assumes that MII events
are only generated for MDIO transactions. However on some SoCs writing
to the MII_SPEED register can also trigger an MII event. As a result,
the next MDIO read has a pending MII event, and immediately reads the
data registers before it contains useful data. When the read does
complete, another MII event is posted, which results in the next read
also going wrong, and the cycle continues.

By writing 0 to the MII_DATA register before writing to the speed
register, this MII event for the MII_SPEED is suppressed, and polled
IO works as expected.

Fixes: 29ae6bd1b0d8 ("net: ethernet: fec: Replace interrupt driven MDIO with polled IO")
Reported-by: Andy Duan <fugang.duan@nxp.com>
Suggested-by: Andy Duan <fugang.duan@nxp.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/ethernet/freescale/fec_main.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 1ae075a246a3..aa5e744ec098 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -996,6 +996,9 @@  fec_restart(struct net_device *ndev)
 		writel(0x0, fep->hwp + FEC_X_CNTRL);
 	}
 
+	/* Prevent an MII event being report when changing speed */
+	writel(0, fep->hwp + FEC_MII_DATA);
+
 	/* Set MII speed */
 	writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
 
@@ -1182,6 +1185,10 @@  fec_stop(struct net_device *ndev)
 		writel(val, fep->hwp + FEC_ECNTRL);
 		fec_enet_stop_mode(fep, true);
 	}
+
+	/* Prevent an MII event being report when changing speed */
+	writel(0, fep->hwp + FEC_MII_DATA);
+
 	writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
 
 	/* We have to keep ENET enabled to have MII interrupt stay working */
@@ -2142,6 +2149,16 @@  static int fec_enet_mii_init(struct platform_device *pdev)
 	if (suppress_preamble)
 		fep->phy_speed |= BIT(7);
 
+	/* Clear MMFR to avoid to generate MII event by writing MSCR.
+	 * MII event generation condition:
+	 * - writing MSCR:
+	 *	- mmfr[31:0]_not_zero & mscr[7:0]_is_zero &
+	 *	  mscr_reg_data_in[7:0] != 0
+	 * - writing MMFR:
+	 *	- mscr[7:0]_not_zero
+	 */
+	writel(0, fep->hwp + FEC_MII_DATA);
+
 	writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
 
 	/* Clear any pending transaction complete indication */