diff mbox series

[net,4/4] net: dsa: b53: Rework ARL bin logic

Message ID 20200414041630.5740-5-f.fainelli@gmail.com
State New
Headers show
Series net: dsa: b53: Various ARL fixes | expand

Commit Message

Florian Fainelli April 14, 2020, 4:16 a.m. UTC
When asking the ARL to read a MAC address, we will get a number of bins
returned in a single read. Out of those bins, there can essentially be 3
states:

- all bins are full, we have no space left, and we can either replace an
  existing address or return that full condition

- the MAC address was found, then we need to return its bin index and
  modify that one, and only that one

- the MAC address was not found and we have a least one bin free, we use
  that bin index location then

The code would unfortunately fail on all counts.

Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 27 +++++++++++++++++++++++----
 1 file changed, 23 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index e937bf365490..b2b2c4a301bf 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1483,6 +1483,7 @@  static int b53_arl_read(struct b53_device *dev, u64 mac,
 			u16 vid, struct b53_arl_entry *ent, u8 *idx,
 			bool is_valid)
 {
+	DECLARE_BITMAP(free_bins, dev->num_arl_entries);
 	unsigned int i;
 	int ret;
 
@@ -1490,6 +1491,8 @@  static int b53_arl_read(struct b53_device *dev, u64 mac,
 	if (ret)
 		return ret;
 
+	bitmap_zero(free_bins, dev->num_arl_entries);
+
 	/* Read the bins */
 	for (i = 0; i < dev->num_arl_entries; i++) {
 		u64 mac_vid;
@@ -1501,16 +1504,24 @@  static int b53_arl_read(struct b53_device *dev, u64 mac,
 			   B53_ARLTBL_DATA_ENTRY(i), &fwd_entry);
 		b53_arl_to_entry(ent, mac_vid, fwd_entry);
 
-		if (!(fwd_entry & ARLTBL_VALID))
+		if (!(fwd_entry & ARLTBL_VALID)) {
+			set_bit(i, free_bins);
 			continue;
+		}
 		if ((mac_vid & ARLTBL_MAC_MASK) != mac)
 			continue;
 		if (dev->vlan_enabled &&
 		    ((mac_vid >> ARLTBL_VID_S) & ARLTBL_VID_MASK) != vid)
 			continue;
 		*idx = i;
+		return 0;
 	}
 
+	if (bitmap_weight(free_bins, dev->num_arl_entries) == 0)
+		return -ENOSPC;
+
+	*idx = find_first_bit(free_bins, dev->num_arl_entries);
+
 	return -ENOENT;
 }
 
@@ -1537,13 +1548,21 @@  static int b53_arl_op(struct b53_device *dev, int op, int port,
 
 	ret = b53_arl_read(dev, mac, vid, &ent, &idx, is_valid);
 	/* If this is a read, just finish now */
-	if (op)
+	if (op && ret != -ENOENT)
 		return ret;
 
 	/* We could not find a matching MAC, so reset to a new entry */
-	if (ret) {
+	switch (ret) {
+	case -ENOSPC:
+		dev_warn(dev->dev, "no space left in ARL\n");
+		return ret;
+	case -ENOENT:
+		dev_dbg(dev->dev, "{%pM,%.4d} not found, using idx: %d\n", addr, vid, idx);
 		fwd_entry = 0;
-		idx = 1;
+		break;
+	default:
+		dev_dbg(dev->dev, "{%pM,%.4d} found, using idx: %d\n", addr, vid, idx);
+		break;
 	}
 
 	/* For multicast address, the port is a bitmask and the validity