| Message ID | 20200330152219.58296-1-jarod@redhat.com |
|---|---|
| State | New |
| Headers | show |
| Series | [net,v2] ipv6: don't auto-add link-local address to lag ports | expand |
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 46d614b611db..2a8175de8578 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -3296,6 +3296,10 @@ static void addrconf_addr_gen(struct inet6_dev *idev, bool prefix_route) if (netif_is_l3_master(idev->dev)) return; + /* no link local addresses on devices flagged as slaves */ + if (idev->dev->flags & IFF_SLAVE) + return; + ipv6_addr_set(&addr, htonl(0xFE800000), 0, 0, 0); switch (idev->cnf.addr_gen_mode) {
Bonding slave and team port devices should not have link-local addresses automatically added to them, as it can interfere with openvswitch being able to properly add tc ingress. Basic reproducer, courtesy of Marcelo: $ ip link add name bond0 type bond $ ip link set dev ens2f0np0 master bond0 $ ip link set dev ens2f1np2 master bond0 $ ip link set dev bond0 up $ ip a s 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: ens2f0np0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether 00:0f:53:2f:ea:40 brd ff:ff:ff:ff:ff:ff 5: ens2f1np2: <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP> mtu 1500 qdisc mq master bond0 state DOWN group default qlen 1000 link/ether 00:0f:53:2f:ea:40 brd ff:ff:ff:ff:ff:ff 11: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 00:0f:53:2f:ea:40 brd ff:ff:ff:ff:ff:ff inet6 fe80::20f:53ff:fe2f:ea40/64 scope link valid_lft forever preferred_lft forever (above trimmed to relevant entries, obviously) $ sysctl net.ipv6.conf.ens2f0np0.addr_gen_mode=0 net.ipv6.conf.ens2f0np0.addr_gen_mode = 0 $ sysctl net.ipv6.conf.ens2f1np2.addr_gen_mode=0 net.ipv6.conf.ens2f1np2.addr_gen_mode = 0 $ ip a l ens2f0np0 2: ens2f0np0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether 00:0f:53:2f:ea:40 brd ff:ff:ff:ff:ff:ff inet6 fe80::20f:53ff:fe2f:ea40/64 scope link tentative valid_lft forever preferred_lft forever $ ip a l ens2f1np2 5: ens2f1np2: <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP> mtu 1500 qdisc mq master bond0 state DOWN group default qlen 1000 link/ether 00:0f:53:2f:ea:40 brd ff:ff:ff:ff:ff:ff inet6 fe80::20f:53ff:fe2f:ea40/64 scope link tentative valid_lft forever preferred_lft forever Looks like addrconf_sysctl_addr_gen_mode() bypasses the original "is this a slave interface?" check added by commit c2edacf80e15, and results in an address getting added, while w/the proposed patch added, no address gets added. This simply adds the same gating check to another code path, and thus should prevent the same devices from erroneously obtaining an ipv6 link-local address. Fixes: d35a00b8e33d ("net/ipv6: allow sysctl to change link-local address generation mode") Reported-by: Moshe Levi <moshele@mellanox.com> CC: Stephen Hemminger <stephen@networkplumber.org> CC: Marcelo Ricardo Leitner <mleitner@redhat.com> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> --- net/ipv6/addrconf.c | 4 ++++ 1 file changed, 4 insertions(+)