diff mbox

[v4,28/37] mtd: st_spi_fsm: Supply a busy wait for post-write status

Message ID 1389188840-14306-29-git-send-email-lee.jones@linaro.org
State New
Headers show

Commit Message

Lee Jones Jan. 8, 2014, 1:47 p.m. UTC
When we write data to the Serial Flash chip we'll wait a predetermined
period of time before giving up. During that period of time we poll the
status register until completion.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/mtd/devices/st_spi_fsm.c | 65 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 65 insertions(+)
diff mbox

Patch

diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index c64f741..c2ee7e3 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -236,8 +236,18 @@ 
 #define FLASH_CMD_READ4_1_1_4  0x6c
 #define FLASH_CMD_READ4_1_4_4  0xec
 
+/* Status register */
+#define FLASH_STATUS_BUSY      0x01
+#define FLASH_STATUS_WEL       0x02
+#define FLASH_STATUS_BP0       0x04
+#define FLASH_STATUS_BP1       0x08
+#define FLASH_STATUS_BP2       0x10
+#define FLASH_STATUS_SRWP0     0x80
+#define FLASH_STATUS_TIMEOUT   0xff
+
 #define FLASH_PAGESIZE         256			/* In Bytes    */
 #define FLASH_PAGESIZE_32      (FLASH_PAGESIZE / 4)	/* In uint32_t */
+#define FLASH_MAX_BUSY_WAIT    (300 * HZ)	/* Maximum 'CHIPERASE' time */
 
 /*
  * Flags to tweak operation of default read/write/erase routines
@@ -517,6 +527,22 @@  static struct stfsm_seq stfsm_seq_read_jedec = {
 		    SEQ_CFG_STARTSEQ),
 };
 
+static struct stfsm_seq stfsm_seq_read_status_fifo = {
+	.data_size = TRANSFER_SIZE(4),
+	.seq_opc[0] = (SEQ_OPC_PADS_1 |
+		       SEQ_OPC_CYCLES(8) |
+		       SEQ_OPC_OPCODE(FLASH_CMD_RDSR)),
+	.seq = {
+		STFSM_INST_CMD1,
+		STFSM_INST_DATA_READ,
+		STFSM_INST_STOP,
+	},
+	.seq_cfg = (SEQ_CFG_PADS_1 |
+		    SEQ_CFG_READNOTWRITE |
+		    SEQ_CFG_CSDEASSERT |
+		    SEQ_CFG_STARTSEQ),
+};
+
 static struct stfsm_seq stfsm_seq_erase_sector = {
 	/* 'addr_cfg' configured during initialisation */
 	.seq_opc = {
@@ -692,6 +718,45 @@  static int stfsm_enter_32bit_addr(struct stfsm *fsm, int enter)
 	return 0;
 }
 
+static uint8_t stfsm_wait_busy(struct stfsm *fsm)
+{
+	struct stfsm_seq *seq = &stfsm_seq_read_status_fifo;
+	unsigned long deadline;
+	uint32_t status;
+
+	/* Use RDRS1 */
+	seq->seq_opc[0] = (SEQ_OPC_PADS_1 |
+			   SEQ_OPC_CYCLES(8) |
+			   SEQ_OPC_OPCODE(FLASH_CMD_RDSR));
+
+	/* Load read_status sequence */
+	stfsm_load_seq(fsm, seq);
+
+	/* Repeat until busy bit is deasserted, or timeout */
+	deadline = jiffies + FLASH_MAX_BUSY_WAIT;
+	do {
+		cond_resched();
+
+		stfsm_wait_seq(fsm);
+
+		stfsm_read_fifo(fsm, &status, 4);
+		if ((status & FLASH_STATUS_BUSY) == 0)
+			return 0;
+
+		/* Restart */
+		writel(seq->seq_cfg, fsm->base + SPI_FAST_SEQ_CFG);
+
+	} while (!time_after_eq(jiffies, deadline));
+
+	stfsm_read_fifo(fsm, &status, 4);
+	if ((status & FLASH_STATUS_BUSY) == 0)
+		return 0;
+
+	dev_err(fsm->dev, "timeout on wait_busy\n");
+
+	return -EIO;
+}
+
 static int stfsm_wrvcr(struct stfsm *fsm, uint8_t data)
 {
 	struct stfsm_seq *seq = &stfsm_seq_wrvcr;