[RESEND,v5,3/4] arm64: dts: qcom: pmi8998: Add nodes for LAB and IBB regulators

Message ID 20200710052919.2611-4-sumit.semwal@linaro.org
State New
Headers show
Series
  • Untitled series #44478
Related show

Commit Message

Sumit Semwal July 10, 2020, 5:29 a.m.
From: Nisha Kumari <nishakumari@codeaurora.org>


This patch adds devicetree nodes for LAB and IBB regulators.

Signed-off-by: Nisha Kumari <nishakumari@codeaurora.org>

Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>

  [sumits: Updated for better compatible strings and names]

---
v5: sumits: removed interrupt-names, since there is only one
            interrupt per node
v4: sumits: removed labibb label which is not needed
v3: sumits: updated interrupt-names as per review comments
v2: sumits: updated for better compatible string and names
---
 arch/arm64/boot/dts/qcom/pmi8998.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

-- 
2.27.0

Patch

diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index 23f9146a161e..d016b12967eb 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -25,5 +25,17 @@  pmi8998_lsid1: pmic@3 {
 		reg = <0x3 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		labibb {
+			compatible = "qcom,pmi8998-lab-ibb";
+
+			ibb: ibb {
+				interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			lab: lab {
+				interrupts = <0x3 0xde 0x0 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
 	};
 };