diff mbox series

v4l2-ctrl: Add VP9 codec levels

Message ID 20200713081501.28609-1-stanimir.varbanov@linaro.org
State Superseded
Headers show
Series v4l2-ctrl: Add VP9 codec levels | expand

Commit Message

Stanimir Varbanov July 13, 2020, 8:15 a.m. UTC 
Add menu control for VP9 codec levels. A total of 14 levels are
defined for Profile 0 (8bit) and Profile 2 (10bit). Each level
is a set of constrained bitstreams coded with targeted resolutions,
frame rates, and bitrates.

The definition has been taken from webm project.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>

---
 .../media/v4l/ext-ctrls-codec.rst             | 42 +++++++++++++++++++
 drivers/media/v4l2-core/v4l2-ctrls.c          | 21 ++++++++++
 include/uapi/linux/v4l2-controls.h            | 17 ++++++++
 3 files changed, 80 insertions(+)

-- 
2.17.1

Comments

Nicolas Dufresne July 14, 2020, 4:09 p.m. UTC | #1 
Le lundi 13 juillet 2020 à 11:15 +0300, Stanimir Varbanov a écrit :
> Add menu control for VP9 codec levels. A total of 14 levels are

> defined for Profile 0 (8bit) and Profile 2 (10bit). Each level

> is a set of constrained bitstreams coded with targeted resolutions,

> frame rates, and bitrates.


Looks good to me. Perhaps literally put the link in the message ?

https://www.webmproject.org/vp9/levels/

> 

> The definition has been taken from webm project.

> 

> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>

> ---

>  .../media/v4l/ext-ctrls-codec.rst             | 42 +++++++++++++++++++

>  drivers/media/v4l2-core/v4l2-ctrls.c          | 21 ++++++++++

>  include/uapi/linux/v4l2-controls.h            | 17 ++++++++

>  3 files changed, 80 insertions(+)

> 

> diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst

> index d0d506a444b1..d49bdafa768a 100644

> --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst

> +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst

> @@ -3316,6 +3316,48 @@ enum v4l2_mpeg_video_vp9_profile -

>      * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_3``

>        - Profile 3

>  

> +.. _v4l2-mpeg-video-vp9-level:

> +

> +``V4L2_CID_MPEG_VIDEO_VP9_LEVEL (enum)``

> +

> +enum v4l2_mpeg_video_vp9_level -

> +    This control allows selecting the level for VP9 encoder.

> +    This is also used to enumerate supported levels by VP9 encoder or decoder.

> +    Possible values are:


Shall we add some hint in the doc itself upon where these levels are
from so one can figure-out what constraints they impose.

Also, as for other levels (H264/HEVC), all drivers are mostly dummy and
don't validate any of this, shall we keep it this way ? Levels are in
fact complex, because some of the constraints are in image size, and
most of the other constraints are raw or compressed size over time, so
requires timing information for let's say a CBR encoder to enforce it,
for the S_FMT function for the raw constraints.

> +

> +.. flat-table::

> +    :header-rows:  0

> +    :stub-columns: 0

> +

> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_1_0``

> +      - Level 1

> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_1_1``

> +      - Level 1.1

> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_2_0``

> +      - Level 2

> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_2_1``

> +      - Level 2.1

> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_3_0``

> +      - Level 3

> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_3_1``

> +      - Level 3.1

> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_4_0``

> +      - Level 4

> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_4_1``

> +      - Level 4.1

> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_5_0``

> +      - Level 5

> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_5_1``

> +      - Level 5.1

> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_5_2``

> +      - Level 5.2

> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_6_0``

> +      - Level 6

> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_6_1``

> +      - Level 6.1

> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_6_2``

> +      - Level 6.2

> +

>  

>  High Efficiency Video Coding (HEVC/H.265) Control Reference

>  ===========================================================

> diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c

> index 3f3fbcd60cc6..359dc737053d 100644

> --- a/drivers/media/v4l2-core/v4l2-ctrls.c

> +++ b/drivers/media/v4l2-core/v4l2-ctrls.c

> @@ -474,6 +474,23 @@ const char * const *v4l2_ctrl_get_menu(u32 id)

>  		"3",

>  		NULL,

>  	};

> +	static const char * const vp9_level[] = {

> +		"1",

> +		"1.1",

> +		"2",

> +		"2.1",

> +		"3",

> +		"3.1",

> +		"4",

> +		"4.1",

> +		"5",

> +		"5.1",

> +		"5.2",

> +		"6",

> +		"6.1",

> +		"6.2",

> +		NULL,

> +	};

>  

>  	static const char * const flash_led_mode[] = {

>  		"Off",

> @@ -685,6 +702,8 @@ const char * const *v4l2_ctrl_get_menu(u32 id)

>  		return vp8_profile;

>  	case V4L2_CID_MPEG_VIDEO_VP9_PROFILE:

>  		return vp9_profile;

> +	case V4L2_CID_MPEG_VIDEO_VP9_LEVEL:

> +		return vp9_level;

>  	case V4L2_CID_JPEG_CHROMA_SUBSAMPLING:

>  		return jpeg_chroma_subsampling;

>  	case V4L2_CID_DV_TX_MODE:

> @@ -938,6 +957,7 @@ const char *v4l2_ctrl_get_name(u32 id)

>  	case V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP:		return "VPX P-Frame QP Value";

>  	case V4L2_CID_MPEG_VIDEO_VP8_PROFILE:			return "VP8 Profile";

>  	case V4L2_CID_MPEG_VIDEO_VP9_PROFILE:			return "VP9 Profile";

> +	case V4L2_CID_MPEG_VIDEO_VP9_LEVEL:			return "VP9 Level";

>  	case V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER:		return "VP8 Frame Header";

>  

>  	/* HEVC controls */

> @@ -1294,6 +1314,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,

>  	case V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL:

>  	case V4L2_CID_MPEG_VIDEO_VP8_PROFILE:

>  	case V4L2_CID_MPEG_VIDEO_VP9_PROFILE:

> +	case V4L2_CID_MPEG_VIDEO_VP9_LEVEL:

>  	case V4L2_CID_DETECT_MD_MODE:

>  	case V4L2_CID_MPEG_VIDEO_HEVC_PROFILE:

>  	case V4L2_CID_MPEG_VIDEO_HEVC_LEVEL:

> diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h

> index 62271418c1be..1b0bc79c1bc3 100644

> --- a/include/uapi/linux/v4l2-controls.h

> +++ b/include/uapi/linux/v4l2-controls.h

> @@ -650,6 +650,23 @@ enum v4l2_mpeg_video_vp9_profile {

>  	V4L2_MPEG_VIDEO_VP9_PROFILE_2				= 2,

>  	V4L2_MPEG_VIDEO_VP9_PROFILE_3				= 3,

>  };

> +#define V4L2_CID_MPEG_VIDEO_VP9_LEVEL			(V4L2_CID_MPEG_BASE+513)

> +enum v4l2_mpeg_video_vp9_level {

> +	V4L2_MPEG_VIDEO_VP9_LEVEL_1_0	= 0,

> +	V4L2_MPEG_VIDEO_VP9_LEVEL_1_1	= 1,

> +	V4L2_MPEG_VIDEO_VP9_LEVEL_2_0	= 2,

> +	V4L2_MPEG_VIDEO_VP9_LEVEL_2_1	= 3,

> +	V4L2_MPEG_VIDEO_VP9_LEVEL_3_0	= 4,

> +	V4L2_MPEG_VIDEO_VP9_LEVEL_3_1	= 5,

> +	V4L2_MPEG_VIDEO_VP9_LEVEL_4_0	= 6,

> +	V4L2_MPEG_VIDEO_VP9_LEVEL_4_1	= 7,

> +	V4L2_MPEG_VIDEO_VP9_LEVEL_5_0	= 8,

> +	V4L2_MPEG_VIDEO_VP9_LEVEL_5_1	= 9,

> +	V4L2_MPEG_VIDEO_VP9_LEVEL_5_2	= 10,

> +	V4L2_MPEG_VIDEO_VP9_LEVEL_6_0	= 11,

> +	V4L2_MPEG_VIDEO_VP9_LEVEL_6_1	= 12,

> +	V4L2_MPEG_VIDEO_VP9_LEVEL_6_2	= 13,

> +};

>  

>  /* CIDs for HEVC encoding. */

>
Stanimir Varbanov July 24, 2020, 8:29 p.m. UTC | #2 
On 7/14/20 7:09 PM, Nicolas Dufresne wrote:
> Le lundi 13 juillet 2020 à 11:15 +0300, Stanimir Varbanov a écrit :

>> Add menu control for VP9 codec levels. A total of 14 levels are

>> defined for Profile 0 (8bit) and Profile 2 (10bit). Each level

>> is a set of constrained bitstreams coded with targeted resolutions,

>> frame rates, and bitrates.

> 

> Looks good to me. Perhaps literally put the link in the message ?

> 

> https://www.webmproject.org/vp9/levels/


sure, I will do that.

> 

>>

>> The definition has been taken from webm project.

>>

>> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>

>> ---

>>  .../media/v4l/ext-ctrls-codec.rst             | 42 +++++++++++++++++++

>>  drivers/media/v4l2-core/v4l2-ctrls.c          | 21 ++++++++++

>>  include/uapi/linux/v4l2-controls.h            | 17 ++++++++

>>  3 files changed, 80 insertions(+)

>>

>> diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst

>> index d0d506a444b1..d49bdafa768a 100644

>> --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst

>> +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst

>> @@ -3316,6 +3316,48 @@ enum v4l2_mpeg_video_vp9_profile -

>>      * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_3``

>>        - Profile 3

>>  

>> +.. _v4l2-mpeg-video-vp9-level:

>> +

>> +``V4L2_CID_MPEG_VIDEO_VP9_LEVEL (enum)``

>> +

>> +enum v4l2_mpeg_video_vp9_level -

>> +    This control allows selecting the level for VP9 encoder.

>> +    This is also used to enumerate supported levels by VP9 encoder or decoder.

>> +    Possible values are:

> 

> Shall we add some hint in the doc itself upon where these levels are

> from so one can figure-out what constraints they impose.


Fine by me. The same link as in the commit message?

> 

> Also, as for other levels (H264/HEVC), all drivers are mostly dummy and

> don't validate any of this, shall we keep it this way ? Levels are in

> fact complex, because some of the constraints are in image size, and

> most of the other constraints are raw or compressed size over time, so

> requires timing information for let's say a CBR encoder to enforce it,

> for the S_FMT function for the raw constraints.


I think this should be a driver responsibility.

> 

>> +

>> +.. flat-table::

>> +    :header-rows:  0

>> +    :stub-columns: 0

>> +

>> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_1_0``

>> +      - Level 1

>> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_1_1``

>> +      - Level 1.1

>> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_2_0``

>> +      - Level 2

>> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_2_1``

>> +      - Level 2.1

>> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_3_0``

>> +      - Level 3

>> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_3_1``

>> +      - Level 3.1

>> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_4_0``

>> +      - Level 4

>> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_4_1``

>> +      - Level 4.1

>> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_5_0``

>> +      - Level 5

>> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_5_1``

>> +      - Level 5.1

>> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_5_2``

>> +      - Level 5.2

>> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_6_0``

>> +      - Level 6

>> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_6_1``

>> +      - Level 6.1

>> +    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_6_2``

>> +      - Level 6.2

>> +

>>  

>>  High Efficiency Video Coding (HEVC/H.265) Control Reference

>>  ===========================================================

>> diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c

>> index 3f3fbcd60cc6..359dc737053d 100644

>> --- a/drivers/media/v4l2-core/v4l2-ctrls.c

>> +++ b/drivers/media/v4l2-core/v4l2-ctrls.c

>> @@ -474,6 +474,23 @@ const char * const *v4l2_ctrl_get_menu(u32 id)

>>  		"3",

>>  		NULL,

>>  	};

>> +	static const char * const vp9_level[] = {

>> +		"1",

>> +		"1.1",

>> +		"2",

>> +		"2.1",

>> +		"3",

>> +		"3.1",

>> +		"4",

>> +		"4.1",

>> +		"5",

>> +		"5.1",

>> +		"5.2",

>> +		"6",

>> +		"6.1",

>> +		"6.2",

>> +		NULL,

>> +	};

>>  

>>  	static const char * const flash_led_mode[] = {

>>  		"Off",

>> @@ -685,6 +702,8 @@ const char * const *v4l2_ctrl_get_menu(u32 id)

>>  		return vp8_profile;

>>  	case V4L2_CID_MPEG_VIDEO_VP9_PROFILE:

>>  		return vp9_profile;

>> +	case V4L2_CID_MPEG_VIDEO_VP9_LEVEL:

>> +		return vp9_level;

>>  	case V4L2_CID_JPEG_CHROMA_SUBSAMPLING:

>>  		return jpeg_chroma_subsampling;

>>  	case V4L2_CID_DV_TX_MODE:

>> @@ -938,6 +957,7 @@ const char *v4l2_ctrl_get_name(u32 id)

>>  	case V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP:		return "VPX P-Frame QP Value";

>>  	case V4L2_CID_MPEG_VIDEO_VP8_PROFILE:			return "VP8 Profile";

>>  	case V4L2_CID_MPEG_VIDEO_VP9_PROFILE:			return "VP9 Profile";

>> +	case V4L2_CID_MPEG_VIDEO_VP9_LEVEL:			return "VP9 Level";

>>  	case V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER:		return "VP8 Frame Header";

>>  

>>  	/* HEVC controls */

>> @@ -1294,6 +1314,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,

>>  	case V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL:

>>  	case V4L2_CID_MPEG_VIDEO_VP8_PROFILE:

>>  	case V4L2_CID_MPEG_VIDEO_VP9_PROFILE:

>> +	case V4L2_CID_MPEG_VIDEO_VP9_LEVEL:

>>  	case V4L2_CID_DETECT_MD_MODE:

>>  	case V4L2_CID_MPEG_VIDEO_HEVC_PROFILE:

>>  	case V4L2_CID_MPEG_VIDEO_HEVC_LEVEL:

>> diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h

>> index 62271418c1be..1b0bc79c1bc3 100644

>> --- a/include/uapi/linux/v4l2-controls.h

>> +++ b/include/uapi/linux/v4l2-controls.h

>> @@ -650,6 +650,23 @@ enum v4l2_mpeg_video_vp9_profile {

>>  	V4L2_MPEG_VIDEO_VP9_PROFILE_2				= 2,

>>  	V4L2_MPEG_VIDEO_VP9_PROFILE_3				= 3,

>>  };

>> +#define V4L2_CID_MPEG_VIDEO_VP9_LEVEL			(V4L2_CID_MPEG_BASE+513)

>> +enum v4l2_mpeg_video_vp9_level {

>> +	V4L2_MPEG_VIDEO_VP9_LEVEL_1_0	= 0,

>> +	V4L2_MPEG_VIDEO_VP9_LEVEL_1_1	= 1,

>> +	V4L2_MPEG_VIDEO_VP9_LEVEL_2_0	= 2,

>> +	V4L2_MPEG_VIDEO_VP9_LEVEL_2_1	= 3,

>> +	V4L2_MPEG_VIDEO_VP9_LEVEL_3_0	= 4,

>> +	V4L2_MPEG_VIDEO_VP9_LEVEL_3_1	= 5,

>> +	V4L2_MPEG_VIDEO_VP9_LEVEL_4_0	= 6,

>> +	V4L2_MPEG_VIDEO_VP9_LEVEL_4_1	= 7,

>> +	V4L2_MPEG_VIDEO_VP9_LEVEL_5_0	= 8,

>> +	V4L2_MPEG_VIDEO_VP9_LEVEL_5_1	= 9,

>> +	V4L2_MPEG_VIDEO_VP9_LEVEL_5_2	= 10,

>> +	V4L2_MPEG_VIDEO_VP9_LEVEL_6_0	= 11,

>> +	V4L2_MPEG_VIDEO_VP9_LEVEL_6_1	= 12,

>> +	V4L2_MPEG_VIDEO_VP9_LEVEL_6_2	= 13,

>> +};

>>  

>>  /* CIDs for HEVC encoding. */

>>  

> 


-- 
regards,
Stan
diff mbox series

Patch

diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index d0d506a444b1..d49bdafa768a 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -3316,6 +3316,48 @@  enum v4l2_mpeg_video_vp9_profile -
     * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_3``
       - Profile 3
 
+.. _v4l2-mpeg-video-vp9-level:
+
+``V4L2_CID_MPEG_VIDEO_VP9_LEVEL (enum)``
+
+enum v4l2_mpeg_video_vp9_level -
+    This control allows selecting the level for VP9 encoder.
+    This is also used to enumerate supported levels by VP9 encoder or decoder.
+    Possible values are:
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_1_0``
+      - Level 1
+    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_1_1``
+      - Level 1.1
+    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_2_0``
+      - Level 2
+    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_2_1``
+      - Level 2.1
+    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_3_0``
+      - Level 3
+    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_3_1``
+      - Level 3.1
+    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_4_0``
+      - Level 4
+    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_4_1``
+      - Level 4.1
+    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_5_0``
+      - Level 5
+    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_5_1``
+      - Level 5.1
+    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_5_2``
+      - Level 5.2
+    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_6_0``
+      - Level 6
+    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_6_1``
+      - Level 6.1
+    * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_6_2``
+      - Level 6.2
+
 
 High Efficiency Video Coding (HEVC/H.265) Control Reference
 ===========================================================
diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
index 3f3fbcd60cc6..359dc737053d 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls.c
@@ -474,6 +474,23 @@  const char * const *v4l2_ctrl_get_menu(u32 id)
 		"3",
 		NULL,
 	};
+	static const char * const vp9_level[] = {
+		"1",
+		"1.1",
+		"2",
+		"2.1",
+		"3",
+		"3.1",
+		"4",
+		"4.1",
+		"5",
+		"5.1",
+		"5.2",
+		"6",
+		"6.1",
+		"6.2",
+		NULL,
+	};
 
 	static const char * const flash_led_mode[] = {
 		"Off",
@@ -685,6 +702,8 @@  const char * const *v4l2_ctrl_get_menu(u32 id)
 		return vp8_profile;
 	case V4L2_CID_MPEG_VIDEO_VP9_PROFILE:
 		return vp9_profile;
+	case V4L2_CID_MPEG_VIDEO_VP9_LEVEL:
+		return vp9_level;
 	case V4L2_CID_JPEG_CHROMA_SUBSAMPLING:
 		return jpeg_chroma_subsampling;
 	case V4L2_CID_DV_TX_MODE:
@@ -938,6 +957,7 @@  const char *v4l2_ctrl_get_name(u32 id)
 	case V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP:		return "VPX P-Frame QP Value";
 	case V4L2_CID_MPEG_VIDEO_VP8_PROFILE:			return "VP8 Profile";
 	case V4L2_CID_MPEG_VIDEO_VP9_PROFILE:			return "VP9 Profile";
+	case V4L2_CID_MPEG_VIDEO_VP9_LEVEL:			return "VP9 Level";
 	case V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER:		return "VP8 Frame Header";
 
 	/* HEVC controls */
@@ -1294,6 +1314,7 @@  void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
 	case V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL:
 	case V4L2_CID_MPEG_VIDEO_VP8_PROFILE:
 	case V4L2_CID_MPEG_VIDEO_VP9_PROFILE:
+	case V4L2_CID_MPEG_VIDEO_VP9_LEVEL:
 	case V4L2_CID_DETECT_MD_MODE:
 	case V4L2_CID_MPEG_VIDEO_HEVC_PROFILE:
 	case V4L2_CID_MPEG_VIDEO_HEVC_LEVEL:
diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
index 62271418c1be..1b0bc79c1bc3 100644
--- a/include/uapi/linux/v4l2-controls.h
+++ b/include/uapi/linux/v4l2-controls.h
@@ -650,6 +650,23 @@  enum v4l2_mpeg_video_vp9_profile {
 	V4L2_MPEG_VIDEO_VP9_PROFILE_2				= 2,
 	V4L2_MPEG_VIDEO_VP9_PROFILE_3				= 3,
 };
+#define V4L2_CID_MPEG_VIDEO_VP9_LEVEL			(V4L2_CID_MPEG_BASE+513)
+enum v4l2_mpeg_video_vp9_level {
+	V4L2_MPEG_VIDEO_VP9_LEVEL_1_0	= 0,
+	V4L2_MPEG_VIDEO_VP9_LEVEL_1_1	= 1,
+	V4L2_MPEG_VIDEO_VP9_LEVEL_2_0	= 2,
+	V4L2_MPEG_VIDEO_VP9_LEVEL_2_1	= 3,
+	V4L2_MPEG_VIDEO_VP9_LEVEL_3_0	= 4,
+	V4L2_MPEG_VIDEO_VP9_LEVEL_3_1	= 5,
+	V4L2_MPEG_VIDEO_VP9_LEVEL_4_0	= 6,
+	V4L2_MPEG_VIDEO_VP9_LEVEL_4_1	= 7,
+	V4L2_MPEG_VIDEO_VP9_LEVEL_5_0	= 8,
+	V4L2_MPEG_VIDEO_VP9_LEVEL_5_1	= 9,
+	V4L2_MPEG_VIDEO_VP9_LEVEL_5_2	= 10,
+	V4L2_MPEG_VIDEO_VP9_LEVEL_6_0	= 11,
+	V4L2_MPEG_VIDEO_VP9_LEVEL_6_1	= 12,
+	V4L2_MPEG_VIDEO_VP9_LEVEL_6_2	= 13,
+};
 
 /* CIDs for HEVC encoding. */