diff mbox series

[10/14] spi: spi-zynqmp-gqspi: Correct a couple of misspellings in kerneldoc

Message ID 20200715150632.409077-11-lee.jones@linaro.org
State Superseded
Headers show
Series Rid W=1 warnings in SPI | expand

Commit Message

Lee Jones July 15, 2020, 3:06 p.m. UTC
Fixes the following W=1 kernel build warning(s):

 drivers/spi/spi-zynqmp-gqspi.c:205: warning: Function parameter or member 'slavecs' not described in 'zynqmp_gqspi_selectslave'
 drivers/spi/spi-zynqmp-gqspi.c:205: warning: Function parameter or member 'slavebus' not described in 'zynqmp_gqspi_selectslave'
 drivers/spi/spi-zynqmp-gqspi.c:205: warning: Excess function parameter 'flashcs' description in 'zynqmp_gqspi_selectslave'
 drivers/spi/spi-zynqmp-gqspi.c:205: warning: Excess function parameter 'flashbus' description in 'zynqmp_gqspi_selectslave'
 drivers/spi/spi-zynqmp-gqspi.c:902: warning: Function parameter or member 'dev' not described in 'zynqmp_qspi_suspend'
 drivers/spi/spi-zynqmp-gqspi.c:902: warning: Excess function parameter '_dev' description in 'zynqmp_qspi_suspend'

Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

---
 drivers/spi/spi-zynqmp-gqspi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

-- 
2.25.1

Comments

Michal Simek July 16, 2020, 7:20 a.m. UTC | #1
On 15. 07. 20 17:06, Lee Jones wrote:
> Fixes the following W=1 kernel build warning(s):

> 

>  drivers/spi/spi-zynqmp-gqspi.c:205: warning: Function parameter or member 'slavecs' not described in 'zynqmp_gqspi_selectslave'

>  drivers/spi/spi-zynqmp-gqspi.c:205: warning: Function parameter or member 'slavebus' not described in 'zynqmp_gqspi_selectslave'

>  drivers/spi/spi-zynqmp-gqspi.c:205: warning: Excess function parameter 'flashcs' description in 'zynqmp_gqspi_selectslave'

>  drivers/spi/spi-zynqmp-gqspi.c:205: warning: Excess function parameter 'flashbus' description in 'zynqmp_gqspi_selectslave'

>  drivers/spi/spi-zynqmp-gqspi.c:902: warning: Function parameter or member 'dev' not described in 'zynqmp_qspi_suspend'

>  drivers/spi/spi-zynqmp-gqspi.c:902: warning: Excess function parameter '_dev' description in 'zynqmp_qspi_suspend'

> 

> Cc: Michal Simek <michal.simek@xilinx.com>

> Signed-off-by: Lee Jones <lee.jones@linaro.org>

> ---

>  drivers/spi/spi-zynqmp-gqspi.c | 6 +++---

>  1 file changed, 3 insertions(+), 3 deletions(-)

> 

> diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c

> index 811c97a7c8589..e17a201252557 100644

> --- a/drivers/spi/spi-zynqmp-gqspi.c

> +++ b/drivers/spi/spi-zynqmp-gqspi.c

> @@ -197,8 +197,8 @@ static inline void zynqmp_gqspi_write(struct zynqmp_qspi *xqspi, u32 offset,

>  /**

>   * zynqmp_gqspi_selectslave:	For selection of slave device

>   * @instanceptr:	Pointer to the zynqmp_qspi structure

> - * @flashcs:	For chip select

> - * @flashbus:	To check which bus is selected- upper or lower

> + * @slavecs:	For chip select

> + * @slavebus:	To check which bus is selected- upper or lower

>   */

>  static void zynqmp_gqspi_selectslave(struct zynqmp_qspi *instanceptr,

>  				     u8 slavecs, u8 slavebus)

> @@ -892,7 +892,7 @@ static int zynqmp_qspi_start_transfer(struct spi_master *master,

>  

>  /**

>   * zynqmp_qspi_suspend:	Suspend method for the QSPI driver

> - * @_dev:	Address of the platform_device structure

> + * @dev:	Address of the platform_device structure

>   *

>   * This function stops the QSPI driver queue and disables the QSPI controller

>   *

> 


Reviewed-by: Michal Simek <michal.simek@xilinx.com>


Thanks,
Michal
diff mbox series

Patch

diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index 811c97a7c8589..e17a201252557 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -197,8 +197,8 @@  static inline void zynqmp_gqspi_write(struct zynqmp_qspi *xqspi, u32 offset,
 /**
  * zynqmp_gqspi_selectslave:	For selection of slave device
  * @instanceptr:	Pointer to the zynqmp_qspi structure
- * @flashcs:	For chip select
- * @flashbus:	To check which bus is selected- upper or lower
+ * @slavecs:	For chip select
+ * @slavebus:	To check which bus is selected- upper or lower
  */
 static void zynqmp_gqspi_selectslave(struct zynqmp_qspi *instanceptr,
 				     u8 slavecs, u8 slavebus)
@@ -892,7 +892,7 @@  static int zynqmp_qspi_start_transfer(struct spi_master *master,
 
 /**
  * zynqmp_qspi_suspend:	Suspend method for the QSPI driver
- * @_dev:	Address of the platform_device structure
+ * @dev:	Address of the platform_device structure
  *
  * This function stops the QSPI driver queue and disables the QSPI controller
  *