diff mbox series

[net-next,iproute2,v2,1/2] iplink: hsr: add support for creating PRP device similar to HSR

Message ID 20200715164012.1222-11-m-karicheri2@ti.com
State Superseded
Headers show
Series [net-next,iproute2,v2,1/2] iplink: hsr: add support for creating PRP device similar to HSR | expand

Commit Message

Murali Karicheri July 15, 2020, 4:40 p.m. UTC 
This patch enhances the iplink command to add a proto parameters to
create PRP device/interface similar to HSR. Both protocols are
quite similar and requires a pair of Ethernet interfaces. So re-use
the existing HSR iplink command to create PRP device/interface as
well. Use proto parameter to differentiate the two protocols.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>

---
 include/uapi/linux/if_link.h | 12 +++++++++++-
 ip/iplink_hsr.c              | 19 +++++++++++++++++--
 2 files changed, 28 insertions(+), 3 deletions(-)

-- 
2.17.1
diff mbox series

Patch

diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
index a8901a39a345..fa2e3f642deb 100644
--- a/include/uapi/linux/if_link.h
+++ b/include/uapi/linux/if_link.h
@@ -904,7 +904,14 @@  enum {
 #define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1)
 
 
-/* HSR section */
+/* HSR/PRP section, both uses same interface */
+
+/* Different redundancy protocols for hsr device */
+enum {
+	HSR_PROTOCOL_HSR,
+	HSR_PROTOCOL_PRP,
+	HSR_PROTOCOL_MAX,
+};
 
 enum {
 	IFLA_HSR_UNSPEC,
@@ -914,6 +921,9 @@  enum {
 	IFLA_HSR_SUPERVISION_ADDR,	/* Supervision frame multicast addr */
 	IFLA_HSR_SEQ_NR,
 	IFLA_HSR_VERSION,		/* HSR version */
+	IFLA_HSR_PROTOCOL,		/* Indicate different protocol than
+					 * HSR. For example PRP.
+					 */
 	__IFLA_HSR_MAX,
 };
 
diff --git a/ip/iplink_hsr.c b/ip/iplink_hsr.c
index 7d9167d4e6a3..6ea138a23cbc 100644
--- a/ip/iplink_hsr.c
+++ b/ip/iplink_hsr.c
@@ -25,7 +25,7 @@  static void print_usage(FILE *f)
 {
 	fprintf(f,
 		"Usage:\tip link add name NAME type hsr slave1 SLAVE1-IF slave2 SLAVE2-IF\n"
-		"\t[ supervision ADDR-BYTE ] [version VERSION]\n"
+		"\t[ supervision ADDR-BYTE ] [version VERSION] [proto PROTOCOL]\n"
 		"\n"
 		"NAME\n"
 		"	name of new hsr device (e.g. hsr0)\n"
@@ -35,7 +35,9 @@  static void print_usage(FILE *f)
 		"	0-255; the last byte of the multicast address used for HSR supervision\n"
 		"	frames (default = 0)\n"
 		"VERSION\n"
-		"	0,1; the protocol version to be used. (default = 0)\n");
+		"	0,1; the protocol version to be used. (default = 0)\n"
+		"PROTOCOL\n"
+		"	0 - HSR, 1 - PRP. (default = 0 - HSR)\n");
 }
 
 static void usage(void)
@@ -49,6 +51,7 @@  static int hsr_parse_opt(struct link_util *lu, int argc, char **argv,
 	int ifindex;
 	unsigned char multicast_spec;
 	unsigned char protocol_version;
+	unsigned char protocol = HSR_PROTOCOL_HSR;
 
 	while (argc > 0) {
 		if (matches(*argv, "supervision") == 0) {
@@ -64,6 +67,13 @@  static int hsr_parse_opt(struct link_util *lu, int argc, char **argv,
 				invarg("version is invalid", *argv);
 			addattr_l(n, 1024, IFLA_HSR_VERSION,
 				  &protocol_version, 1);
+		} else if (matches(*argv, "proto") == 0) {
+			NEXT_ARG();
+			if (!(get_u8(&protocol, *argv, 0) == HSR_PROTOCOL_HSR ||
+			      get_u8(&protocol, *argv, 0) == HSR_PROTOCOL_PRP))
+				invarg("protocol is invalid", *argv);
+			addattr_l(n, 1024, IFLA_HSR_PROTOCOL,
+				  &protocol, 1);
 		} else if (matches(*argv, "slave1") == 0) {
 			NEXT_ARG();
 			ifindex = ll_name_to_index(*argv);
@@ -140,6 +150,11 @@  static void hsr_print_opt(struct link_util *lu, FILE *f, struct rtattr *tb[])
 					 RTA_PAYLOAD(tb[IFLA_HSR_SUPERVISION_ADDR]),
 					 ARPHRD_VOID,
 					 b1, sizeof(b1)));
+	if (tb[IFLA_HSR_PROTOCOL])
+		print_int(PRINT_ANY,
+			  "proto",
+			  "proto %d ",
+			  rta_getattr_u8(tb[IFLA_HSR_PROTOCOL]));
 }
 
 static void hsr_print_help(struct link_util *lu, int argc, char **argv,