diff mbox series

[v4,1/2] tpm: tis: add support for MMIO TPM on SynQuacer

Message ID 20200717084932.3449-2-masahisa.kojima@linaro.org
State Superseded
Headers show
Series synquacer: add TPM support | expand

Commit Message

Masahisa Kojima July 17, 2020, 8:49 a.m. UTC
When fitted, the SynQuacer platform exposes its SPI TPM via a MMIO
window that is backed by the SPI command sequencer in the SPI bus
controller. This arrangement has the limitation that only byte size
accesses are supported, and so we'll need to provide a separate module
that take this into account.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>

---
 drivers/char/tpm/Kconfig             |  12 ++
 drivers/char/tpm/Makefile            |   1 +
 drivers/char/tpm/tpm_tis_synquacer.c | 209 +++++++++++++++++++++++++++
 3 files changed, 222 insertions(+)
 create mode 100644 drivers/char/tpm/tpm_tis_synquacer.c

-- 
2.20.1

Comments

Jarkko Sakkinen July 23, 2020, 2:36 a.m. UTC | #1
On Fri, Jul 17, 2020 at 05:49:31PM +0900, Masahisa Kojima wrote:
> When fitted, the SynQuacer platform exposes its SPI TPM via a MMIO

> window that is backed by the SPI command sequencer in the SPI bus

> controller. This arrangement has the limitation that only byte size

> accesses are supported, and so we'll need to provide a separate module

> that take this into account.

> 

> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

> Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>

> ---

>  drivers/char/tpm/Kconfig             |  12 ++

>  drivers/char/tpm/Makefile            |   1 +

>  drivers/char/tpm/tpm_tis_synquacer.c | 209 +++++++++++++++++++++++++++

>  3 files changed, 222 insertions(+)

>  create mode 100644 drivers/char/tpm/tpm_tis_synquacer.c

> 

> diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig

> index 58b4c573d176..a18c314da211 100644

> --- a/drivers/char/tpm/Kconfig

> +++ b/drivers/char/tpm/Kconfig

> @@ -74,6 +74,18 @@ config TCG_TIS_SPI_CR50

>  	  If you have a H1 secure module running Cr50 firmware on SPI bus,

>  	  say Yes and it will be accessible from within Linux.

>  

> +config TCG_TIS_SYNQUACER

> +	tristate "TPM Interface Specification 1.2 Interface / TPM 2.0 FIFO Interface (MMIO - SynQuacer)"

> +	depends on ARCH_SYNQUACER

> +	select TCG_TIS_CORE

> +	help

> +	  If you have a TPM security chip that is compliant with the

> +	  TCG TIS 1.2 TPM specification (TPM1.2) or the TCG PTP FIFO

> +	  specification (TPM2.0) say Yes and it will be accessible from

> +	  within Linux on Socionext SynQuacer platform.

> +	  To compile this driver as a module, choose  M here;

> +	  the module will be called tpm_tis_synquacer.

> +

>  config TCG_TIS_I2C_ATMEL

>  	tristate "TPM Interface Specification 1.2 Interface (I2C - Atmel)"

>  	depends on I2C

> diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile

> index 9567e5197f74..84db4fb3a9c9 100644

> --- a/drivers/char/tpm/Makefile

> +++ b/drivers/char/tpm/Makefile

> @@ -21,6 +21,7 @@ tpm-$(CONFIG_EFI) += eventlog/efi.o

>  tpm-$(CONFIG_OF) += eventlog/of.o

>  obj-$(CONFIG_TCG_TIS_CORE) += tpm_tis_core.o

>  obj-$(CONFIG_TCG_TIS) += tpm_tis.o

> +obj-$(CONFIG_TCG_TIS_SYNQUACER) += tpm_tis_synquacer.o

>  

>  obj-$(CONFIG_TCG_TIS_SPI) += tpm_tis_spi.o

>  tpm_tis_spi-y := tpm_tis_spi_main.o

> diff --git a/drivers/char/tpm/tpm_tis_synquacer.c b/drivers/char/tpm/tpm_tis_synquacer.c

> new file mode 100644

> index 000000000000..ac2a1d2a5001

> --- /dev/null

> +++ b/drivers/char/tpm/tpm_tis_synquacer.c

> @@ -0,0 +1,209 @@

> +// SPDX-License-Identifier: GPL-2.0

> +/*

> + * Copyright (C) 2020 Linaro Ltd.

> + *

> + * This device driver implements MMIO TPM on SynQuacer Platform.

> + */

> +#include <linux/acpi.h>

> +#include <linux/init.h>

> +#include <linux/module.h>

> +#include <linux/slab.h>

> +#include <linux/of.h>

> +#include <linux/of_device.h>

> +#include <linux/kernel.h>

> +#include "tpm.h"

> +#include "tpm_tis_core.h"

> +

> +struct tpm_tis_synquacer_info {

> +	struct resource res;

> +	/* irq > 0 means: use irq $irq;

> +	 * irq = 0 means: autoprobe for an irq;

> +	 * irq = -1 means: no irq support

> +	 */

> +	int irq;

> +};


According to the coding style, multi-line comments must begin with an
empty line.

Also it would be preferable to have the comment prepending the struct
for easier read:

/*
 * irq > 0 means: use irq $irq;
 * irq = 0 means: autoprobe for an irq;
 * irq = -1 means: no irq support
 */
struct tpm_tis_synquacer_info {

> +

> +struct tpm_tis_synquacer_phy {

> +	struct tpm_tis_data priv;

> +	void __iomem *iobase;

> +};

> +

> +static inline struct tpm_tis_synquacer_phy *to_tpm_tis_tcg_phy(struct tpm_tis_data *data)

> +{

> +	return container_of(data, struct tpm_tis_synquacer_phy, priv);

> +}

> +

> +static int tpm_tis_synquacer_read_bytes(struct tpm_tis_data *data, u32 addr,

> +					u16 len, u8 *result)

> +{

> +	struct tpm_tis_synquacer_phy *phy = to_tpm_tis_tcg_phy(data);

> +

> +	while (len--)

> +		*result++ = ioread8(phy->iobase + addr);

> +

> +	return 0;

> +}

> +

> +static int tpm_tis_synquacer_write_bytes(struct tpm_tis_data *data, u32 addr,

> +					 u16 len, const u8 *value)

> +{

> +	struct tpm_tis_synquacer_phy *phy = to_tpm_tis_tcg_phy(data);

> +

> +	while (len--)

> +		iowrite8(*value++, phy->iobase + addr);

> +

> +	return 0;

> +}

> +

> +static int tpm_tis_synquacer_read16_bw(struct tpm_tis_data *data,

> +				       u32 addr, u16 *result)

> +{

> +	struct tpm_tis_synquacer_phy *phy = to_tpm_tis_tcg_phy(data);

> +

> +	/*

> +	 * Due to the limitation of SPI controller on SynQuacer,

> +	 * 16/32 bits access must be done in byte-wise and descending order.

> +	 */

> +	*result = (ioread8(phy->iobase + addr + 1) << 8) |

> +		  (ioread8(phy->iobase + addr));

> +

> +	return 0;

> +}

> +

> +static int tpm_tis_synquacer_read32_bw(struct tpm_tis_data *data,

> +				       u32 addr, u32 *result)

> +{

> +	struct tpm_tis_synquacer_phy *phy = to_tpm_tis_tcg_phy(data);

> +

> +	/*

> +	 * Due to the limitation of SPI controller on SynQuacer,

> +	 * 16/32 bits access must be done in byte-wise and descending order.

> +	 */

> +	*result = (ioread8(phy->iobase + addr + 3) << 24) |

> +		  (ioread8(phy->iobase + addr + 2) << 16) |

> +		  (ioread8(phy->iobase + addr + 1) << 8) |

> +		  (ioread8(phy->iobase + addr));

> +

> +	return 0;

> +}

> +

> +static int tpm_tis_synquacer_write32_bw(struct tpm_tis_data *data,

> +					u32 addr, u32 value)

> +{

> +	struct tpm_tis_synquacer_phy *phy = to_tpm_tis_tcg_phy(data);

> +

> +	/*

> +	 * Due to the limitation of SPI controller on SynQuacer,

> +	 * 16/32 bits access must be done in byte-wise and descending order.

> +	 */

> +	iowrite8(value >> 24, phy->iobase + addr + 3);

> +	iowrite8(value >> 16, phy->iobase + addr + 2);

> +	iowrite8(value >> 8, phy->iobase + addr + 1);

> +	iowrite8(value, phy->iobase + addr);

> +

> +	return 0;

> +}

> +

> +static const struct tpm_tis_phy_ops tpm_tcg_bw = {

> +	.read_bytes	= tpm_tis_synquacer_read_bytes,

> +	.write_bytes	= tpm_tis_synquacer_write_bytes,

> +	.read16		= tpm_tis_synquacer_read16_bw,

> +	.read32		= tpm_tis_synquacer_read32_bw,

> +	.write32	= tpm_tis_synquacer_write32_bw,

> +};

> +

> +static int tpm_tis_synquacer_init(struct device *dev,

> +				  struct tpm_tis_synquacer_info *tpm_info)

> +{

> +	struct tpm_tis_synquacer_phy *phy;

> +

> +	phy = devm_kzalloc(dev, sizeof(struct tpm_tis_synquacer_phy), GFP_KERNEL);

> +	if (phy == NULL)

> +		return -ENOMEM;

> +

> +	phy->iobase = devm_ioremap_resource(dev, &tpm_info->res);

> +	if (IS_ERR(phy->iobase))

> +		return PTR_ERR(phy->iobase);

> +

> +	return tpm_tis_core_init(dev, &phy->priv, tpm_info->irq, &tpm_tcg_bw,

> +				 ACPI_HANDLE(dev));

> +}

> +

> +static SIMPLE_DEV_PM_OPS(tpm_tis_synquacer_pm, tpm_pm_suspend, tpm_tis_resume);

> +

> +static int tpm_tis_synquacer_probe(struct platform_device *pdev)

> +{

> +	struct tpm_tis_synquacer_info tpm_info = {};

> +	struct resource *res;

> +

> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

> +	if (res == NULL) {

> +		dev_err(&pdev->dev, "no memory resource defined\n");

> +		return -ENODEV;

> +	}

> +	tpm_info.res = *res;

> +

> +	tpm_info.irq = -1;

> +

> +	return tpm_tis_synquacer_init(&pdev->dev, &tpm_info);

> +}

> +

> +static int tpm_tis_synquacer_remove(struct platform_device *pdev)

> +{

> +	struct tpm_chip *chip = dev_get_drvdata(&pdev->dev);

> +

> +	tpm_chip_unregister(chip);

> +	tpm_tis_remove(chip);

> +

> +	return 0;

> +}

> +

> +#ifdef CONFIG_OF

> +static const struct of_device_id tis_synquacer_of_platform_match[] = {

> +	{.compatible = "socionext,synquacer-tpm-mmio"},

> +	{},

> +};

> +MODULE_DEVICE_TABLE(of, tis_synquacer_of_platform_match);

> +#endif

> +

> +#ifdef CONFIG_ACPI

> +static const struct acpi_device_id tpm_synquacer_acpi_tbl[] = {

> +	{ "SCX0009" },

> +	{},

> +};

> +MODULE_DEVICE_TABLE(acpi, tpm_synquacer_acpi_tbl);

> +#endif

> +

> +static struct platform_driver tis_synquacer_drv = {

> +	.probe = tpm_tis_synquacer_probe,

> +	.remove = tpm_tis_synquacer_remove,

> +	.driver = {

> +		.name		= "tpm_tis_synquacer",

> +		.pm		= &tpm_tis_synquacer_pm,

> +		.of_match_table = of_match_ptr(tis_synquacer_of_platform_match),

> +		.acpi_match_table = ACPI_PTR(tpm_synquacer_acpi_tbl),

> +	},

> +};

> +

> +static int __init tpm_tis_synquacer_module_init(void)

> +{

> +	int rc;

> +

> +	rc = platform_driver_register(&tis_synquacer_drv);

> +	if (rc)

> +		return rc;

> +

> +	return 0;

> +}

> +

> +static void __exit tpm_tis_synquacer_module_exit(void)

> +{

> +	platform_driver_unregister(&tis_synquacer_drv);

> +}

> +

> +module_init(tpm_tis_synquacer_module_init);

> +module_exit(tpm_tis_synquacer_module_exit);

> +MODULE_AUTHOR("Masahisa Kojima (masahisa.kojima@linaro.org)");


It is completely redundant field because authorship is part of the
commit object itself. And it does not tell the truth after a while
anyway. MODULE_AUTHOR() made more sense before there was any sort of
legit versio control in place.

I think it would be better not to have it as we don't have any use
for this data. It is just cruft hanging there.

> +MODULE_DESCRIPTION("TPM MMIO Driver for Socionext SynQuacer platform");

> +MODULE_VERSION("2.0");

> +MODULE_LICENSE("GPL");

> -- 

> 2.20.1

> 


/Jarkko
Masahisa Kojima July 27, 2020, 3:13 a.m. UTC | #2
Hi Jarkko,

Thank you for your comments.

On Thu, 23 Jul 2020 at 11:36, Jarkko Sakkinen
<jarkko.sakkinen@linux.intel.com> wrote:
>

> On Fri, Jul 17, 2020 at 05:49:31PM +0900, Masahisa Kojima wrote:

> > When fitted, the SynQuacer platform exposes its SPI TPM via a MMIO

> > window that is backed by the SPI command sequencer in the SPI bus

> > controller. This arrangement has the limitation that only byte size

> > accesses are supported, and so we'll need to provide a separate module

> > that take this into account.

> >

> > Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

> > Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>

> > ---

> >  drivers/char/tpm/Kconfig             |  12 ++

> >  drivers/char/tpm/Makefile            |   1 +

> >  drivers/char/tpm/tpm_tis_synquacer.c | 209 +++++++++++++++++++++++++++

> >  3 files changed, 222 insertions(+)

> >  create mode 100644 drivers/char/tpm/tpm_tis_synquacer.c

> >

> > diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig

> > index 58b4c573d176..a18c314da211 100644

> > --- a/drivers/char/tpm/Kconfig

> > +++ b/drivers/char/tpm/Kconfig

> > @@ -74,6 +74,18 @@ config TCG_TIS_SPI_CR50

> >         If you have a H1 secure module running Cr50 firmware on SPI bus,

> >         say Yes and it will be accessible from within Linux.

> >

> > +config TCG_TIS_SYNQUACER

> > +     tristate "TPM Interface Specification 1.2 Interface / TPM 2.0 FIFO Interface (MMIO - SynQuacer)"

> > +     depends on ARCH_SYNQUACER

> > +     select TCG_TIS_CORE

> > +     help

> > +       If you have a TPM security chip that is compliant with the

> > +       TCG TIS 1.2 TPM specification (TPM1.2) or the TCG PTP FIFO

> > +       specification (TPM2.0) say Yes and it will be accessible from

> > +       within Linux on Socionext SynQuacer platform.

> > +       To compile this driver as a module, choose  M here;

> > +       the module will be called tpm_tis_synquacer.

> > +

> >  config TCG_TIS_I2C_ATMEL

> >       tristate "TPM Interface Specification 1.2 Interface (I2C - Atmel)"

> >       depends on I2C

> > diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile

> > index 9567e5197f74..84db4fb3a9c9 100644

> > --- a/drivers/char/tpm/Makefile

> > +++ b/drivers/char/tpm/Makefile

> > @@ -21,6 +21,7 @@ tpm-$(CONFIG_EFI) += eventlog/efi.o

> >  tpm-$(CONFIG_OF) += eventlog/of.o

> >  obj-$(CONFIG_TCG_TIS_CORE) += tpm_tis_core.o

> >  obj-$(CONFIG_TCG_TIS) += tpm_tis.o

> > +obj-$(CONFIG_TCG_TIS_SYNQUACER) += tpm_tis_synquacer.o

> >

> >  obj-$(CONFIG_TCG_TIS_SPI) += tpm_tis_spi.o

> >  tpm_tis_spi-y := tpm_tis_spi_main.o

> > diff --git a/drivers/char/tpm/tpm_tis_synquacer.c b/drivers/char/tpm/tpm_tis_synquacer.c

> > new file mode 100644

> > index 000000000000..ac2a1d2a5001

> > --- /dev/null

> > +++ b/drivers/char/tpm/tpm_tis_synquacer.c

> > @@ -0,0 +1,209 @@

> > +// SPDX-License-Identifier: GPL-2.0

> > +/*

> > + * Copyright (C) 2020 Linaro Ltd.

> > + *

> > + * This device driver implements MMIO TPM on SynQuacer Platform.

> > + */

> > +#include <linux/acpi.h>

> > +#include <linux/init.h>

> > +#include <linux/module.h>

> > +#include <linux/slab.h>

> > +#include <linux/of.h>

> > +#include <linux/of_device.h>

> > +#include <linux/kernel.h>

> > +#include "tpm.h"

> > +#include "tpm_tis_core.h"

> > +

> > +struct tpm_tis_synquacer_info {

> > +     struct resource res;

> > +     /* irq > 0 means: use irq $irq;

> > +      * irq = 0 means: autoprobe for an irq;

> > +      * irq = -1 means: no irq support

> > +      */

> > +     int irq;

> > +};

>

> According to the coding style, multi-line comments must begin with an

> empty line.

>

> Also it would be preferable to have the comment prepending the struct

> for easier read:

>

> /*

>  * irq > 0 means: use irq $irq;

>  * irq = 0 means: autoprobe for an irq;

>  * irq = -1 means: no irq support

>  */

> struct tpm_tis_synquacer_info {


I will modify.

>

> > +

> > +struct tpm_tis_synquacer_phy {

> > +     struct tpm_tis_data priv;

> > +     void __iomem *iobase;

> > +};

> > +

> > +static inline struct tpm_tis_synquacer_phy *to_tpm_tis_tcg_phy(struct tpm_tis_data *data)

> > +{

> > +     return container_of(data, struct tpm_tis_synquacer_phy, priv);

> > +}

> > +

> > +static int tpm_tis_synquacer_read_bytes(struct tpm_tis_data *data, u32 addr,

> > +                                     u16 len, u8 *result)

> > +{

> > +     struct tpm_tis_synquacer_phy *phy = to_tpm_tis_tcg_phy(data);

> > +

> > +     while (len--)

> > +             *result++ = ioread8(phy->iobase + addr);

> > +

> > +     return 0;

> > +}

> > +

> > +static int tpm_tis_synquacer_write_bytes(struct tpm_tis_data *data, u32 addr,

> > +                                      u16 len, const u8 *value)

> > +{

> > +     struct tpm_tis_synquacer_phy *phy = to_tpm_tis_tcg_phy(data);

> > +

> > +     while (len--)

> > +             iowrite8(*value++, phy->iobase + addr);

> > +

> > +     return 0;

> > +}

> > +

> > +static int tpm_tis_synquacer_read16_bw(struct tpm_tis_data *data,

> > +                                    u32 addr, u16 *result)

> > +{

> > +     struct tpm_tis_synquacer_phy *phy = to_tpm_tis_tcg_phy(data);

> > +

> > +     /*

> > +      * Due to the limitation of SPI controller on SynQuacer,

> > +      * 16/32 bits access must be done in byte-wise and descending order.

> > +      */

> > +     *result = (ioread8(phy->iobase + addr + 1) << 8) |

> > +               (ioread8(phy->iobase + addr));

> > +

> > +     return 0;

> > +}

> > +

> > +static int tpm_tis_synquacer_read32_bw(struct tpm_tis_data *data,

> > +                                    u32 addr, u32 *result)

> > +{

> > +     struct tpm_tis_synquacer_phy *phy = to_tpm_tis_tcg_phy(data);

> > +

> > +     /*

> > +      * Due to the limitation of SPI controller on SynQuacer,

> > +      * 16/32 bits access must be done in byte-wise and descending order.

> > +      */

> > +     *result = (ioread8(phy->iobase + addr + 3) << 24) |

> > +               (ioread8(phy->iobase + addr + 2) << 16) |

> > +               (ioread8(phy->iobase + addr + 1) << 8) |

> > +               (ioread8(phy->iobase + addr));

> > +

> > +     return 0;

> > +}

> > +

> > +static int tpm_tis_synquacer_write32_bw(struct tpm_tis_data *data,

> > +                                     u32 addr, u32 value)

> > +{

> > +     struct tpm_tis_synquacer_phy *phy = to_tpm_tis_tcg_phy(data);

> > +

> > +     /*

> > +      * Due to the limitation of SPI controller on SynQuacer,

> > +      * 16/32 bits access must be done in byte-wise and descending order.

> > +      */

> > +     iowrite8(value >> 24, phy->iobase + addr + 3);

> > +     iowrite8(value >> 16, phy->iobase + addr + 2);

> > +     iowrite8(value >> 8, phy->iobase + addr + 1);

> > +     iowrite8(value, phy->iobase + addr);

> > +

> > +     return 0;

> > +}

> > +

> > +static const struct tpm_tis_phy_ops tpm_tcg_bw = {

> > +     .read_bytes     = tpm_tis_synquacer_read_bytes,

> > +     .write_bytes    = tpm_tis_synquacer_write_bytes,

> > +     .read16         = tpm_tis_synquacer_read16_bw,

> > +     .read32         = tpm_tis_synquacer_read32_bw,

> > +     .write32        = tpm_tis_synquacer_write32_bw,

> > +};

> > +

> > +static int tpm_tis_synquacer_init(struct device *dev,

> > +                               struct tpm_tis_synquacer_info *tpm_info)

> > +{

> > +     struct tpm_tis_synquacer_phy *phy;

> > +

> > +     phy = devm_kzalloc(dev, sizeof(struct tpm_tis_synquacer_phy), GFP_KERNEL);

> > +     if (phy == NULL)

> > +             return -ENOMEM;

> > +

> > +     phy->iobase = devm_ioremap_resource(dev, &tpm_info->res);

> > +     if (IS_ERR(phy->iobase))

> > +             return PTR_ERR(phy->iobase);

> > +

> > +     return tpm_tis_core_init(dev, &phy->priv, tpm_info->irq, &tpm_tcg_bw,

> > +                              ACPI_HANDLE(dev));

> > +}

> > +

> > +static SIMPLE_DEV_PM_OPS(tpm_tis_synquacer_pm, tpm_pm_suspend, tpm_tis_resume);

> > +

> > +static int tpm_tis_synquacer_probe(struct platform_device *pdev)

> > +{

> > +     struct tpm_tis_synquacer_info tpm_info = {};

> > +     struct resource *res;

> > +

> > +     res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

> > +     if (res == NULL) {

> > +             dev_err(&pdev->dev, "no memory resource defined\n");

> > +             return -ENODEV;

> > +     }

> > +     tpm_info.res = *res;

> > +

> > +     tpm_info.irq = -1;

> > +

> > +     return tpm_tis_synquacer_init(&pdev->dev, &tpm_info);

> > +}

> > +

> > +static int tpm_tis_synquacer_remove(struct platform_device *pdev)

> > +{

> > +     struct tpm_chip *chip = dev_get_drvdata(&pdev->dev);

> > +

> > +     tpm_chip_unregister(chip);

> > +     tpm_tis_remove(chip);

> > +

> > +     return 0;

> > +}

> > +

> > +#ifdef CONFIG_OF

> > +static const struct of_device_id tis_synquacer_of_platform_match[] = {

> > +     {.compatible = "socionext,synquacer-tpm-mmio"},

> > +     {},

> > +};

> > +MODULE_DEVICE_TABLE(of, tis_synquacer_of_platform_match);

> > +#endif

> > +

> > +#ifdef CONFIG_ACPI

> > +static const struct acpi_device_id tpm_synquacer_acpi_tbl[] = {

> > +     { "SCX0009" },

> > +     {},

> > +};

> > +MODULE_DEVICE_TABLE(acpi, tpm_synquacer_acpi_tbl);

> > +#endif

> > +

> > +static struct platform_driver tis_synquacer_drv = {

> > +     .probe = tpm_tis_synquacer_probe,

> > +     .remove = tpm_tis_synquacer_remove,

> > +     .driver = {

> > +             .name           = "tpm_tis_synquacer",

> > +             .pm             = &tpm_tis_synquacer_pm,

> > +             .of_match_table = of_match_ptr(tis_synquacer_of_platform_match),

> > +             .acpi_match_table = ACPI_PTR(tpm_synquacer_acpi_tbl),

> > +     },

> > +};

> > +

> > +static int __init tpm_tis_synquacer_module_init(void)

> > +{

> > +     int rc;

> > +

> > +     rc = platform_driver_register(&tis_synquacer_drv);

> > +     if (rc)

> > +             return rc;

> > +

> > +     return 0;

> > +}

> > +

> > +static void __exit tpm_tis_synquacer_module_exit(void)

> > +{

> > +     platform_driver_unregister(&tis_synquacer_drv);

> > +}

> > +

> > +module_init(tpm_tis_synquacer_module_init);

> > +module_exit(tpm_tis_synquacer_module_exit);

> > +MODULE_AUTHOR("Masahisa Kojima (masahisa.kojima@linaro.org)");

>

> It is completely redundant field because authorship is part of the

> commit object itself. And it does not tell the truth after a while

> anyway. MODULE_AUTHOR() made more sense before there was any sort of

> legit versio control in place.

>

> I think it would be better not to have it as we don't have any use

> for this data. It is just cruft hanging there.


OK, I will remove MODULE_AUTHOR() line.
I will also plan to remove MODULE_VERSION("2.0").
tpm_tis_spi_main.c only has MODULE_DESCRIPTION() and MODULE_LICENSE(),
I plan to follow this example.

Regards,
Masahisa

>

> > +MODULE_DESCRIPTION("TPM MMIO Driver for Socionext SynQuacer platform");

> > +MODULE_VERSION("2.0");

> > +MODULE_LICENSE("GPL");

> > --

> > 2.20.1

> >

>

> /Jarkko
Jarkko Sakkinen Aug. 13, 2020, 9:48 p.m. UTC | #3
On Mon, Jul 27, 2020 at 12:13:44PM +0900, Masahisa Kojima wrote:
> Hi Jarkko,

> 

> Thank you for your comments.

> 

> On Thu, 23 Jul 2020 at 11:36, Jarkko Sakkinen

> <jarkko.sakkinen@linux.intel.com> wrote:

> >

> > On Fri, Jul 17, 2020 at 05:49:31PM +0900, Masahisa Kojima wrote:

> > > When fitted, the SynQuacer platform exposes its SPI TPM via a MMIO

> > > window that is backed by the SPI command sequencer in the SPI bus

> > > controller. This arrangement has the limitation that only byte size

> > > accesses are supported, and so we'll need to provide a separate module

> > > that take this into account.

> > >

> > > Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

> > > Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>

> > > ---

> > >  drivers/char/tpm/Kconfig             |  12 ++

> > >  drivers/char/tpm/Makefile            |   1 +

> > >  drivers/char/tpm/tpm_tis_synquacer.c | 209 +++++++++++++++++++++++++++

> > >  3 files changed, 222 insertions(+)

> > >  create mode 100644 drivers/char/tpm/tpm_tis_synquacer.c

> > >

> > > diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig

> > > index 58b4c573d176..a18c314da211 100644

> > > --- a/drivers/char/tpm/Kconfig

> > > +++ b/drivers/char/tpm/Kconfig

> > > @@ -74,6 +74,18 @@ config TCG_TIS_SPI_CR50

> > >         If you have a H1 secure module running Cr50 firmware on SPI bus,

> > >         say Yes and it will be accessible from within Linux.

> > >

> > > +config TCG_TIS_SYNQUACER

> > > +     tristate "TPM Interface Specification 1.2 Interface / TPM 2.0 FIFO Interface (MMIO - SynQuacer)"

> > > +     depends on ARCH_SYNQUACER

> > > +     select TCG_TIS_CORE

> > > +     help

> > > +       If you have a TPM security chip that is compliant with the

> > > +       TCG TIS 1.2 TPM specification (TPM1.2) or the TCG PTP FIFO

> > > +       specification (TPM2.0) say Yes and it will be accessible from

> > > +       within Linux on Socionext SynQuacer platform.

> > > +       To compile this driver as a module, choose  M here;

> > > +       the module will be called tpm_tis_synquacer.

> > > +

> > >  config TCG_TIS_I2C_ATMEL

> > >       tristate "TPM Interface Specification 1.2 Interface (I2C - Atmel)"

> > >       depends on I2C

> > > diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile

> > > index 9567e5197f74..84db4fb3a9c9 100644

> > > --- a/drivers/char/tpm/Makefile

> > > +++ b/drivers/char/tpm/Makefile

> > > @@ -21,6 +21,7 @@ tpm-$(CONFIG_EFI) += eventlog/efi.o

> > >  tpm-$(CONFIG_OF) += eventlog/of.o

> > >  obj-$(CONFIG_TCG_TIS_CORE) += tpm_tis_core.o

> > >  obj-$(CONFIG_TCG_TIS) += tpm_tis.o

> > > +obj-$(CONFIG_TCG_TIS_SYNQUACER) += tpm_tis_synquacer.o

> > >

> > >  obj-$(CONFIG_TCG_TIS_SPI) += tpm_tis_spi.o

> > >  tpm_tis_spi-y := tpm_tis_spi_main.o

> > > diff --git a/drivers/char/tpm/tpm_tis_synquacer.c b/drivers/char/tpm/tpm_tis_synquacer.c

> > > new file mode 100644

> > > index 000000000000..ac2a1d2a5001

> > > --- /dev/null

> > > +++ b/drivers/char/tpm/tpm_tis_synquacer.c

> > > @@ -0,0 +1,209 @@

> > > +// SPDX-License-Identifier: GPL-2.0

> > > +/*

> > > + * Copyright (C) 2020 Linaro Ltd.

> > > + *

> > > + * This device driver implements MMIO TPM on SynQuacer Platform.

> > > + */

> > > +#include <linux/acpi.h>

> > > +#include <linux/init.h>

> > > +#include <linux/module.h>

> > > +#include <linux/slab.h>

> > > +#include <linux/of.h>

> > > +#include <linux/of_device.h>

> > > +#include <linux/kernel.h>

> > > +#include "tpm.h"

> > > +#include "tpm_tis_core.h"

> > > +

> > > +struct tpm_tis_synquacer_info {

> > > +     struct resource res;

> > > +     /* irq > 0 means: use irq $irq;

> > > +      * irq = 0 means: autoprobe for an irq;

> > > +      * irq = -1 means: no irq support

> > > +      */

> > > +     int irq;

> > > +};

> >

> > According to the coding style, multi-line comments must begin with an

> > empty line.

> >

> > Also it would be preferable to have the comment prepending the struct

> > for easier read:

> >

> > /*

> >  * irq > 0 means: use irq $irq;

> >  * irq = 0 means: autoprobe for an irq;

> >  * irq = -1 means: no irq support

> >  */

> > struct tpm_tis_synquacer_info {

> 

> I will modify.

> 

> >

> > > +

> > > +struct tpm_tis_synquacer_phy {

> > > +     struct tpm_tis_data priv;

> > > +     void __iomem *iobase;

> > > +};

> > > +

> > > +static inline struct tpm_tis_synquacer_phy *to_tpm_tis_tcg_phy(struct tpm_tis_data *data)

> > > +{

> > > +     return container_of(data, struct tpm_tis_synquacer_phy, priv);

> > > +}

> > > +

> > > +static int tpm_tis_synquacer_read_bytes(struct tpm_tis_data *data, u32 addr,

> > > +                                     u16 len, u8 *result)

> > > +{

> > > +     struct tpm_tis_synquacer_phy *phy = to_tpm_tis_tcg_phy(data);

> > > +

> > > +     while (len--)

> > > +             *result++ = ioread8(phy->iobase + addr);

> > > +

> > > +     return 0;

> > > +}

> > > +

> > > +static int tpm_tis_synquacer_write_bytes(struct tpm_tis_data *data, u32 addr,

> > > +                                      u16 len, const u8 *value)

> > > +{

> > > +     struct tpm_tis_synquacer_phy *phy = to_tpm_tis_tcg_phy(data);

> > > +

> > > +     while (len--)

> > > +             iowrite8(*value++, phy->iobase + addr);

> > > +

> > > +     return 0;

> > > +}

> > > +

> > > +static int tpm_tis_synquacer_read16_bw(struct tpm_tis_data *data,

> > > +                                    u32 addr, u16 *result)

> > > +{

> > > +     struct tpm_tis_synquacer_phy *phy = to_tpm_tis_tcg_phy(data);

> > > +

> > > +     /*

> > > +      * Due to the limitation of SPI controller on SynQuacer,

> > > +      * 16/32 bits access must be done in byte-wise and descending order.

> > > +      */

> > > +     *result = (ioread8(phy->iobase + addr + 1) << 8) |

> > > +               (ioread8(phy->iobase + addr));

> > > +

> > > +     return 0;

> > > +}

> > > +

> > > +static int tpm_tis_synquacer_read32_bw(struct tpm_tis_data *data,

> > > +                                    u32 addr, u32 *result)

> > > +{

> > > +     struct tpm_tis_synquacer_phy *phy = to_tpm_tis_tcg_phy(data);

> > > +

> > > +     /*

> > > +      * Due to the limitation of SPI controller on SynQuacer,

> > > +      * 16/32 bits access must be done in byte-wise and descending order.

> > > +      */

> > > +     *result = (ioread8(phy->iobase + addr + 3) << 24) |

> > > +               (ioread8(phy->iobase + addr + 2) << 16) |

> > > +               (ioread8(phy->iobase + addr + 1) << 8) |

> > > +               (ioread8(phy->iobase + addr));

> > > +

> > > +     return 0;

> > > +}

> > > +

> > > +static int tpm_tis_synquacer_write32_bw(struct tpm_tis_data *data,

> > > +                                     u32 addr, u32 value)

> > > +{

> > > +     struct tpm_tis_synquacer_phy *phy = to_tpm_tis_tcg_phy(data);

> > > +

> > > +     /*

> > > +      * Due to the limitation of SPI controller on SynQuacer,

> > > +      * 16/32 bits access must be done in byte-wise and descending order.

> > > +      */

> > > +     iowrite8(value >> 24, phy->iobase + addr + 3);

> > > +     iowrite8(value >> 16, phy->iobase + addr + 2);

> > > +     iowrite8(value >> 8, phy->iobase + addr + 1);

> > > +     iowrite8(value, phy->iobase + addr);

> > > +

> > > +     return 0;

> > > +}

> > > +

> > > +static const struct tpm_tis_phy_ops tpm_tcg_bw = {

> > > +     .read_bytes     = tpm_tis_synquacer_read_bytes,

> > > +     .write_bytes    = tpm_tis_synquacer_write_bytes,

> > > +     .read16         = tpm_tis_synquacer_read16_bw,

> > > +     .read32         = tpm_tis_synquacer_read32_bw,

> > > +     .write32        = tpm_tis_synquacer_write32_bw,

> > > +};

> > > +

> > > +static int tpm_tis_synquacer_init(struct device *dev,

> > > +                               struct tpm_tis_synquacer_info *tpm_info)

> > > +{

> > > +     struct tpm_tis_synquacer_phy *phy;

> > > +

> > > +     phy = devm_kzalloc(dev, sizeof(struct tpm_tis_synquacer_phy), GFP_KERNEL);

> > > +     if (phy == NULL)

> > > +             return -ENOMEM;

> > > +

> > > +     phy->iobase = devm_ioremap_resource(dev, &tpm_info->res);

> > > +     if (IS_ERR(phy->iobase))

> > > +             return PTR_ERR(phy->iobase);

> > > +

> > > +     return tpm_tis_core_init(dev, &phy->priv, tpm_info->irq, &tpm_tcg_bw,

> > > +                              ACPI_HANDLE(dev));

> > > +}

> > > +

> > > +static SIMPLE_DEV_PM_OPS(tpm_tis_synquacer_pm, tpm_pm_suspend, tpm_tis_resume);

> > > +

> > > +static int tpm_tis_synquacer_probe(struct platform_device *pdev)

> > > +{

> > > +     struct tpm_tis_synquacer_info tpm_info = {};

> > > +     struct resource *res;

> > > +

> > > +     res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

> > > +     if (res == NULL) {

> > > +             dev_err(&pdev->dev, "no memory resource defined\n");

> > > +             return -ENODEV;

> > > +     }

> > > +     tpm_info.res = *res;

> > > +

> > > +     tpm_info.irq = -1;

> > > +

> > > +     return tpm_tis_synquacer_init(&pdev->dev, &tpm_info);

> > > +}

> > > +

> > > +static int tpm_tis_synquacer_remove(struct platform_device *pdev)

> > > +{

> > > +     struct tpm_chip *chip = dev_get_drvdata(&pdev->dev);

> > > +

> > > +     tpm_chip_unregister(chip);

> > > +     tpm_tis_remove(chip);

> > > +

> > > +     return 0;

> > > +}

> > > +

> > > +#ifdef CONFIG_OF

> > > +static const struct of_device_id tis_synquacer_of_platform_match[] = {

> > > +     {.compatible = "socionext,synquacer-tpm-mmio"},

> > > +     {},

> > > +};

> > > +MODULE_DEVICE_TABLE(of, tis_synquacer_of_platform_match);

> > > +#endif

> > > +

> > > +#ifdef CONFIG_ACPI

> > > +static const struct acpi_device_id tpm_synquacer_acpi_tbl[] = {

> > > +     { "SCX0009" },

> > > +     {},

> > > +};

> > > +MODULE_DEVICE_TABLE(acpi, tpm_synquacer_acpi_tbl);

> > > +#endif

> > > +

> > > +static struct platform_driver tis_synquacer_drv = {

> > > +     .probe = tpm_tis_synquacer_probe,

> > > +     .remove = tpm_tis_synquacer_remove,

> > > +     .driver = {

> > > +             .name           = "tpm_tis_synquacer",

> > > +             .pm             = &tpm_tis_synquacer_pm,

> > > +             .of_match_table = of_match_ptr(tis_synquacer_of_platform_match),

> > > +             .acpi_match_table = ACPI_PTR(tpm_synquacer_acpi_tbl),

> > > +     },

> > > +};

> > > +

> > > +static int __init tpm_tis_synquacer_module_init(void)

> > > +{

> > > +     int rc;

> > > +

> > > +     rc = platform_driver_register(&tis_synquacer_drv);

> > > +     if (rc)

> > > +             return rc;

> > > +

> > > +     return 0;

> > > +}

> > > +

> > > +static void __exit tpm_tis_synquacer_module_exit(void)

> > > +{

> > > +     platform_driver_unregister(&tis_synquacer_drv);

> > > +}

> > > +

> > > +module_init(tpm_tis_synquacer_module_init);

> > > +module_exit(tpm_tis_synquacer_module_exit);

> > > +MODULE_AUTHOR("Masahisa Kojima (masahisa.kojima@linaro.org)");

> >

> > It is completely redundant field because authorship is part of the

> > commit object itself. And it does not tell the truth after a while

> > anyway. MODULE_AUTHOR() made more sense before there was any sort of

> > legit versio control in place.

> >

> > I think it would be better not to have it as we don't have any use

> > for this data. It is just cruft hanging there.

> 

> OK, I will remove MODULE_AUTHOR() line.

> I will also plan to remove MODULE_VERSION("2.0").

> tpm_tis_spi_main.c only has MODULE_DESCRIPTION() and MODULE_LICENSE(),

> I plan to follow this example.

> 

> Regards,

> Masahisa


Yeah, I mean in GIT log your authority will be already sealed :-)

/Jarkko
diff mbox series

Patch

diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index 58b4c573d176..a18c314da211 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -74,6 +74,18 @@  config TCG_TIS_SPI_CR50
 	  If you have a H1 secure module running Cr50 firmware on SPI bus,
 	  say Yes and it will be accessible from within Linux.
 
+config TCG_TIS_SYNQUACER
+	tristate "TPM Interface Specification 1.2 Interface / TPM 2.0 FIFO Interface (MMIO - SynQuacer)"
+	depends on ARCH_SYNQUACER
+	select TCG_TIS_CORE
+	help
+	  If you have a TPM security chip that is compliant with the
+	  TCG TIS 1.2 TPM specification (TPM1.2) or the TCG PTP FIFO
+	  specification (TPM2.0) say Yes and it will be accessible from
+	  within Linux on Socionext SynQuacer platform.
+	  To compile this driver as a module, choose  M here;
+	  the module will be called tpm_tis_synquacer.
+
 config TCG_TIS_I2C_ATMEL
 	tristate "TPM Interface Specification 1.2 Interface (I2C - Atmel)"
 	depends on I2C
diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile
index 9567e5197f74..84db4fb3a9c9 100644
--- a/drivers/char/tpm/Makefile
+++ b/drivers/char/tpm/Makefile
@@ -21,6 +21,7 @@  tpm-$(CONFIG_EFI) += eventlog/efi.o
 tpm-$(CONFIG_OF) += eventlog/of.o
 obj-$(CONFIG_TCG_TIS_CORE) += tpm_tis_core.o
 obj-$(CONFIG_TCG_TIS) += tpm_tis.o
+obj-$(CONFIG_TCG_TIS_SYNQUACER) += tpm_tis_synquacer.o
 
 obj-$(CONFIG_TCG_TIS_SPI) += tpm_tis_spi.o
 tpm_tis_spi-y := tpm_tis_spi_main.o
diff --git a/drivers/char/tpm/tpm_tis_synquacer.c b/drivers/char/tpm/tpm_tis_synquacer.c
new file mode 100644
index 000000000000..ac2a1d2a5001
--- /dev/null
+++ b/drivers/char/tpm/tpm_tis_synquacer.c
@@ -0,0 +1,209 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Linaro Ltd.
+ *
+ * This device driver implements MMIO TPM on SynQuacer Platform.
+ */
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/kernel.h>
+#include "tpm.h"
+#include "tpm_tis_core.h"
+
+struct tpm_tis_synquacer_info {
+	struct resource res;
+	/* irq > 0 means: use irq $irq;
+	 * irq = 0 means: autoprobe for an irq;
+	 * irq = -1 means: no irq support
+	 */
+	int irq;
+};
+
+struct tpm_tis_synquacer_phy {
+	struct tpm_tis_data priv;
+	void __iomem *iobase;
+};
+
+static inline struct tpm_tis_synquacer_phy *to_tpm_tis_tcg_phy(struct tpm_tis_data *data)
+{
+	return container_of(data, struct tpm_tis_synquacer_phy, priv);
+}
+
+static int tpm_tis_synquacer_read_bytes(struct tpm_tis_data *data, u32 addr,
+					u16 len, u8 *result)
+{
+	struct tpm_tis_synquacer_phy *phy = to_tpm_tis_tcg_phy(data);
+
+	while (len--)
+		*result++ = ioread8(phy->iobase + addr);
+
+	return 0;
+}
+
+static int tpm_tis_synquacer_write_bytes(struct tpm_tis_data *data, u32 addr,
+					 u16 len, const u8 *value)
+{
+	struct tpm_tis_synquacer_phy *phy = to_tpm_tis_tcg_phy(data);
+
+	while (len--)
+		iowrite8(*value++, phy->iobase + addr);
+
+	return 0;
+}
+
+static int tpm_tis_synquacer_read16_bw(struct tpm_tis_data *data,
+				       u32 addr, u16 *result)
+{
+	struct tpm_tis_synquacer_phy *phy = to_tpm_tis_tcg_phy(data);
+
+	/*
+	 * Due to the limitation of SPI controller on SynQuacer,
+	 * 16/32 bits access must be done in byte-wise and descending order.
+	 */
+	*result = (ioread8(phy->iobase + addr + 1) << 8) |
+		  (ioread8(phy->iobase + addr));
+
+	return 0;
+}
+
+static int tpm_tis_synquacer_read32_bw(struct tpm_tis_data *data,
+				       u32 addr, u32 *result)
+{
+	struct tpm_tis_synquacer_phy *phy = to_tpm_tis_tcg_phy(data);
+
+	/*
+	 * Due to the limitation of SPI controller on SynQuacer,
+	 * 16/32 bits access must be done in byte-wise and descending order.
+	 */
+	*result = (ioread8(phy->iobase + addr + 3) << 24) |
+		  (ioread8(phy->iobase + addr + 2) << 16) |
+		  (ioread8(phy->iobase + addr + 1) << 8) |
+		  (ioread8(phy->iobase + addr));
+
+	return 0;
+}
+
+static int tpm_tis_synquacer_write32_bw(struct tpm_tis_data *data,
+					u32 addr, u32 value)
+{
+	struct tpm_tis_synquacer_phy *phy = to_tpm_tis_tcg_phy(data);
+
+	/*
+	 * Due to the limitation of SPI controller on SynQuacer,
+	 * 16/32 bits access must be done in byte-wise and descending order.
+	 */
+	iowrite8(value >> 24, phy->iobase + addr + 3);
+	iowrite8(value >> 16, phy->iobase + addr + 2);
+	iowrite8(value >> 8, phy->iobase + addr + 1);
+	iowrite8(value, phy->iobase + addr);
+
+	return 0;
+}
+
+static const struct tpm_tis_phy_ops tpm_tcg_bw = {
+	.read_bytes	= tpm_tis_synquacer_read_bytes,
+	.write_bytes	= tpm_tis_synquacer_write_bytes,
+	.read16		= tpm_tis_synquacer_read16_bw,
+	.read32		= tpm_tis_synquacer_read32_bw,
+	.write32	= tpm_tis_synquacer_write32_bw,
+};
+
+static int tpm_tis_synquacer_init(struct device *dev,
+				  struct tpm_tis_synquacer_info *tpm_info)
+{
+	struct tpm_tis_synquacer_phy *phy;
+
+	phy = devm_kzalloc(dev, sizeof(struct tpm_tis_synquacer_phy), GFP_KERNEL);
+	if (phy == NULL)
+		return -ENOMEM;
+
+	phy->iobase = devm_ioremap_resource(dev, &tpm_info->res);
+	if (IS_ERR(phy->iobase))
+		return PTR_ERR(phy->iobase);
+
+	return tpm_tis_core_init(dev, &phy->priv, tpm_info->irq, &tpm_tcg_bw,
+				 ACPI_HANDLE(dev));
+}
+
+static SIMPLE_DEV_PM_OPS(tpm_tis_synquacer_pm, tpm_pm_suspend, tpm_tis_resume);
+
+static int tpm_tis_synquacer_probe(struct platform_device *pdev)
+{
+	struct tpm_tis_synquacer_info tpm_info = {};
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no memory resource defined\n");
+		return -ENODEV;
+	}
+	tpm_info.res = *res;
+
+	tpm_info.irq = -1;
+
+	return tpm_tis_synquacer_init(&pdev->dev, &tpm_info);
+}
+
+static int tpm_tis_synquacer_remove(struct platform_device *pdev)
+{
+	struct tpm_chip *chip = dev_get_drvdata(&pdev->dev);
+
+	tpm_chip_unregister(chip);
+	tpm_tis_remove(chip);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id tis_synquacer_of_platform_match[] = {
+	{.compatible = "socionext,synquacer-tpm-mmio"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, tis_synquacer_of_platform_match);
+#endif
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id tpm_synquacer_acpi_tbl[] = {
+	{ "SCX0009" },
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, tpm_synquacer_acpi_tbl);
+#endif
+
+static struct platform_driver tis_synquacer_drv = {
+	.probe = tpm_tis_synquacer_probe,
+	.remove = tpm_tis_synquacer_remove,
+	.driver = {
+		.name		= "tpm_tis_synquacer",
+		.pm		= &tpm_tis_synquacer_pm,
+		.of_match_table = of_match_ptr(tis_synquacer_of_platform_match),
+		.acpi_match_table = ACPI_PTR(tpm_synquacer_acpi_tbl),
+	},
+};
+
+static int __init tpm_tis_synquacer_module_init(void)
+{
+	int rc;
+
+	rc = platform_driver_register(&tis_synquacer_drv);
+	if (rc)
+		return rc;
+
+	return 0;
+}
+
+static void __exit tpm_tis_synquacer_module_exit(void)
+{
+	platform_driver_unregister(&tis_synquacer_drv);
+}
+
+module_init(tpm_tis_synquacer_module_init);
+module_exit(tpm_tis_synquacer_module_exit);
+MODULE_AUTHOR("Masahisa Kojima (masahisa.kojima@linaro.org)");
+MODULE_DESCRIPTION("TPM MMIO Driver for Socionext SynQuacer platform");
+MODULE_VERSION("2.0");
+MODULE_LICENSE("GPL");