diff mbox series

[v2,11/14] spi: spi-topcliff-pch: Add missing descriptions to 'struct pch_spi_data'

Message ID 20200717135424.2442271-12-lee.jones@linaro.org
State Accepted
Commit decf5326944bc6c32c9256f3992adfb7283cb0f3
Headers show
Series Rid W=1 warnings in SPI | expand

Commit Message

Lee Jones July 17, 2020, 1:54 p.m. UTC
Fixes the following W=1 kernel build warning(s):

 drivers/spi/spi-topcliff-pch.c:184: warning: Function parameter or member 'io_base_addr' not described in 'pch_spi_data'
 drivers/spi/spi-topcliff-pch.c:184: warning: Function parameter or member 'pkt_tx_buff' not described in 'pch_spi_data'
 drivers/spi/spi-topcliff-pch.c:184: warning: Function parameter or member 'pkt_rx_buff' not described in 'pch_spi_data'
 drivers/spi/spi-topcliff-pch.c:184: warning: Function parameter or member 'dma' not described in 'pch_spi_data'
 drivers/spi/spi-topcliff-pch.c:184: warning: Function parameter or member 'use_dma' not described in 'pch_spi_data'
 drivers/spi/spi-topcliff-pch.c:184: warning: Function parameter or member 'save_total_len' not described in 'pch_spi_data'

Signed-off-by: Lee Jones <lee.jones@linaro.org>

---
 drivers/spi/spi-topcliff-pch.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

-- 
2.25.1
diff mbox series

Patch

diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c
index d7ea6af74743e..baadd380cb297 100644
--- a/drivers/spi/spi-topcliff-pch.c
+++ b/drivers/spi/spi-topcliff-pch.c
@@ -122,6 +122,7 @@  struct pch_spi_dma_ctrl {
 /**
  * struct pch_spi_data - Holds the SPI channel specific details
  * @io_remap_addr:		The remapped PCI base address
+ * @io_base_addr:		Base address
  * @master:			Pointer to the SPI master structure
  * @work:			Reference to work queue handler
  * @wait:			Wait queue for waking up upon receiving an
@@ -138,8 +139,8 @@  struct pch_spi_dma_ctrl {
  *				transfer
  * @rx_index:			Receive data count; for bookkeeping during
  *				transfer
- * @tx_buff:			Buffer for data to be transmitted
- * @rx_index:			Buffer for Received data
+ * @pkt_tx_buff:		Buffer for data to be transmitted
+ * @pkt_rx_buff:		Buffer for received data
  * @n_curnt_chip:		The chip number that this SPI driver currently
  *				operates on
  * @current_chip:		Reference to the current chip that this SPI
@@ -151,7 +152,10 @@  struct pch_spi_dma_ctrl {
  * @board_dat:			Reference to the SPI device data structure
  * @plat_dev:			platform_device structure
  * @ch:				SPI channel number
+ * @dma:			Local DMA information
+ * @use_dma:			True if DMA is to be used
  * @irq_reg_sts:		Status of IRQ registration
+ * @save_total_len:		Save length while data is being transferred
  */
 struct pch_spi_data {
 	void __iomem *io_remap_addr;