diff mbox series

[v4,3/4] arm64: dts: sync Allwinner H6 files

Message ID 20200204093758.584725-4-a.heider@gmail.com
State New
Headers show
Series arm64: sun50i: Add support for Orange Pi 3 | expand

Commit Message

Andre Heider Feb. 4, 2020, 9:37 a.m. UTC
Taken from the linux-next commit:
98d25b0b266d Merge branch 'sunxi/dt-for-5.6' into sunxi/for-next

Drop the /omit-if-no-ref/ keyword as it's not supported by u-boot.

Signed-off-by: Andre Heider <a.heider at gmail.com>
Acked-by: Maxime Ripard <mripard at kernel.org>
---
 arch/arm/dts/sun50i-h6-beelink-gs1.dts       |  48 +++-
 arch/arm/dts/sun50i-h6-orangepi-lite2.dts    |   6 +-
 arch/arm/dts/sun50i-h6-orangepi-one-plus.dts |   8 +-
 arch/arm/dts/sun50i-h6-orangepi.dtsi         |  18 +-
 arch/arm/dts/sun50i-h6-pine-h64.dts          |  33 ++-
 arch/arm/dts/sun50i-h6.dtsi                  | 262 +++++++++++++++++--
 6 files changed, 328 insertions(+), 47 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
index 0dc33c90dd..df6d872c34 100644
--- a/arch/arm/dts/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
@@ -1,7 +1,5 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2019 Clément Péron <peron.clem at gmail.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Clément Péron <peron.clem at gmail.com>
 
 /dts-v1/;
 
@@ -25,6 +23,7 @@ 
 	connector {
 		compatible = "hdmi-connector";
 		type = "a";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
 
 		port {
 			hdmi_con_in: endpoint {
@@ -51,12 +50,34 @@ 
 		regulator-max-microvolt = <5000000>;
 		regulator-always-on;
 	};
+
+	sound-spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sun50i-h6-spdif";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
 };
 
 &de {
 	status = "okay";
 };
 
+&dwc3 {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -70,6 +91,11 @@ 
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
 &hdmi {
 	status = "okay";
 };
@@ -206,6 +232,7 @@ 
 			};
 
 			reg_dcdcc: dcdcc {
+				regulator-enable-ramp-delay = <32000>;
 				regulator-min-microvolt = <810000>;
 				regulator-max-microvolt = <1080000>;
 				regulator-name = "vdd-gpu";
@@ -232,6 +259,11 @@ 
 	};
 };
 
+&r_ir {
+	linux,rc-map-name = "rc-beelink-gs1";
+	status = "okay";
+};
+
 &r_pio {
 	/*
 	 * PL0 and PL1 are used for PMIC I2C
@@ -243,6 +275,10 @@ 
 	vcc-pm-supply = <&reg_aldo1>;
 };
 
+&spdif {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ph_pins>;
@@ -258,3 +294,7 @@ 
 	usb0_vbus-supply = <&reg_vcc5v>;
 	status = "okay";
 };
+
+&usb3phy {
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun50i-h6-orangepi-lite2.dts b/arch/arm/dts/sun50i-h6-orangepi-lite2.dts
index e098a2475f..e7ca75c0d0 100644
--- a/arch/arm/dts/sun50i-h6-orangepi-lite2.dts
+++ b/arch/arm/dts/sun50i-h6-orangepi-lite2.dts
@@ -1,7 +1,5 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2018 Jagan Teki <jagan at openedev.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Jagan Teki <jagan at openedev.com>
 
 #include "sun50i-h6-orangepi.dtsi"
 
diff --git a/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts b/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
index 12e17567ab..83aab73688 100644
--- a/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
+++ b/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
@@ -1,8 +1,6 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2018 Amarula Solutions
- * Author: Jagan Teki <jagan at amarulasolutions.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Amarula Solutions
+// Author: Jagan Teki <jagan at amarulasolutions.com>
 
 #include "sun50i-h6-orangepi.dtsi"
 
diff --git a/arch/arm/dts/sun50i-h6-orangepi.dtsi b/arch/arm/dts/sun50i-h6-orangepi.dtsi
index 62e27948a3..37f4c57597 100644
--- a/arch/arm/dts/sun50i-h6-orangepi.dtsi
+++ b/arch/arm/dts/sun50i-h6-orangepi.dtsi
@@ -1,8 +1,6 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2018 Amarula Solutions
- * Author: Jagan Teki <jagan at amarulasolutions.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Amarula Solutions
+// Author: Jagan Teki <jagan at amarulasolutions.com>
 
 /dts-v1/;
 
@@ -55,6 +53,11 @@ 
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
@@ -163,6 +166,7 @@ 
 			};
 
 			reg_dcdcc: dcdcc {
+				regulator-enable-ramp-delay = <32000>;
 				regulator-min-microvolt = <810000>;
 				regulator-max-microvolt = <1080000>;
 				regulator-name = "vdd-gpu";
@@ -189,6 +193,10 @@ 
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ph_pins>;
diff --git a/arch/arm/dts/sun50i-h6-pine-h64.dts b/arch/arm/dts/sun50i-h6-pine-h64.dts
index 1898345183..d1c2aa5b3a 100644
--- a/arch/arm/dts/sun50i-h6-pine-h64.dts
+++ b/arch/arm/dts/sun50i-h6-pine-h64.dts
@@ -1,7 +1,5 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (c) 2017 Icenowy Zheng <icenowy at aosc.io>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2017 Icenowy Zheng <icenowy at aosc.io>
 
 /dts-v1/;
 
@@ -10,7 +8,7 @@ 
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Pine H64";
+	model = "Pine H64 model A";
 	compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
 
 	aliases {
@@ -22,9 +20,10 @@ 
 		stdout-path = "serial0:115200n8";
 	};
 
-	connector {
+	hdmi_connector: connector {
 		compatible = "hdmi-connector";
 		type = "a";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
 
 		port {
 			hdmi_con_in: endpoint {
@@ -52,6 +51,16 @@ 
 		};
 	};
 
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_usb_vbus: vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb-vbus";
@@ -68,7 +77,7 @@ 
 	pinctrl-0 = <&ext_rgmii_pins>;
 	phy-mode = "rgmii";
 	phy-handle = <&ext_rgmii_phy>;
-	phy-supply = <&reg_aldo2>;
+	phy-supply = <&reg_gmac_3v3>;
 	allwinner,rx-delay-ps = <200>;
 	allwinner,tx-delay-ps = <200>;
 	status = "okay";
@@ -85,6 +94,11 @@ 
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
 &hdmi {
 	status = "okay";
 };
@@ -221,6 +235,7 @@ 
 			};
 
 			reg_dcdcc: dcdcc {
+				regulator-enable-ramp-delay = <32000>;
 				regulator-min-microvolt = <810000>;
 				regulator-max-microvolt = <1080000>;
 				regulator-name = "vdd-gpu";
@@ -255,6 +270,10 @@ 
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
 &r_pio {
 	vcc-pm-supply = <&reg_aldo1>;
 };
diff --git a/arch/arm/dts/sun50i-h6.dtsi b/arch/arm/dts/sun50i-h6.dtsi
index a117f479ae..148bf0107b 100644
--- a/arch/arm/dts/sun50i-h6.dtsi
+++ b/arch/arm/dts/sun50i-h6.dtsi
@@ -1,7 +1,5 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2017 Icenowy Zheng <icenowy at aosc.io>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Icenowy Zheng <icenowy at aosc.io>
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/sun50i-h6-ccu.h>
@@ -11,6 +9,7 @@ 
 #include <dt-bindings/reset/sun50i-h6-ccu.h>
 #include <dt-bindings/reset/sun50i-h6-r-ccu.h>
 #include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -56,14 +55,6 @@ 
 		status = "disabled";
 	};
 
-	iosc: internal-osc-clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <16000000>;
-		clock-accuracy = <300000000>;
-		clock-output-names = "iosc";
-	};
-
 	osc24M: osc24M_clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -71,11 +62,21 @@ 
 		clock-output-names = "osc24M";
 	};
 
-	osc32k: osc32k_clk {
+	ext_osc32k: ext_osc32k_clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
-		clock-output-names = "osc32k";
+		clock-output-names = "ext_osc32k";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu",
+			     "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
 	};
 
 	psci {
@@ -157,6 +158,29 @@ 
 			allwinner,sram = <&ve_sram 1>;
 		};
 
+		gpu: gpu at 1800000 {
+			compatible = "allwinner,sun50i-h6-mali",
+				     "arm,mali-t720";
+			reg = <0x01800000 0x4000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
+			clock-names = "core", "bus";
+			resets = <&ccu RST_BUS_GPU>;
+			status = "disabled";
+		};
+
+		crypto: crypto at 1904000 {
+			compatible = "allwinner,sun50i-h6-crypto";
+			reg = <0x01904000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>, <&ccu CLK_MBUS_CE>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
 		syscon: syscon at 3000000 {
 			compatible = "allwinner,sun50i-h6-system-control",
 				     "allwinner,sun50i-a64-system-control";
@@ -197,7 +221,7 @@ 
 		ccu: clock at 3001000 {
 			compatible = "allwinner,sun50i-h6-ccu";
 			reg = <0x03001000 0x1000>;
-			clocks = <&osc24M>, <&osc32k>, <&iosc>;
+			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>;
 			clock-names = "hosc", "losc", "iosc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -215,9 +239,15 @@ 
 			#dma-cells = <1>;
 		};
 
-		sid: sid at 3006000 {
+		sid: efuse at 3006000 {
 			compatible = "allwinner,sun50i-h6-sid";
 			reg = <0x03006000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration at 14 {
+				reg = <0x14 0x8>;
+			};
 		};
 
 		watchdog: watchdog at 30090a0 {
@@ -225,10 +255,21 @@ 
 				     "allwinner,sun6i-a31-wdt";
 			reg = <0x030090a0 0x20>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
 			/* Broken on some H6 boards */
 			status = "disabled";
 		};
 
+		pwm: pwm at 300a000 {
+			compatible = "allwinner,sun50i-h6-pwm";
+			reg = <0x0300a000 0x400>;
+			clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;
+			clock-names = "mod", "bus";
+			resets = <&ccu RST_BUS_PWM>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		pio: pinctrl at 300b000 {
 			compatible = "allwinner,sun50i-h6-pinctrl";
 			reg = <0x0300b000 0x400>;
@@ -236,7 +277,7 @@ 
 				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_APB1>, <&osc24M>, <&osc32k>;
+			clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc 0>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
@@ -256,6 +297,21 @@ 
 				function = "hdmi";
 			};
 
+			i2c0_pins: i2c0-pins {
+				pins = "PD25", "PD26";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PH5", "PH6";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PD23", "PD24";
+				function = "i2c2";
+			};
+
 			mmc0_pins: mmc0-pins {
 				pins = "PF0", "PF1", "PF2", "PF3",
 				       "PF4", "PF5";
@@ -285,10 +341,25 @@ 
 				bias-pull-up;
 			};
 
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PH7";
+				function = "spdif";
+			};
+
 			uart0_ph_pins: uart0-ph-pins {
 				pins = "PH0", "PH1";
 				function = "uart0";
 			};
+
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
 		};
 
 		gic: interrupt-controller at 3021000 {
@@ -394,6 +465,48 @@ 
 			status = "disabled";
 		};
 
+		i2c0: i2c at 5002000 {
+			compatible = "allwinner,sun50i-h6-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c at 5002400 {
+			compatible = "allwinner,sun50i-h6-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002400 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c at 5002800 {
+			compatible = "allwinner,sun50i-h6-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002800 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		emac: ethernet at 5020000 {
 			compatible = "allwinner,sun50i-h6-emac",
 				     "allwinner,sun50i-a64-emac";
@@ -414,6 +527,21 @@ 
 			};
 		};
 
+		spdif: spdif at 5093000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-h6-spdif";
+			reg = <0x05093000 0x400>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			resets = <&ccu RST_BUS_SPDIF>;
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spdif_tx_pin>;
+			status = "disabled";
+		};
+
 		usb2otg: usb at 5100000 {
 			compatible = "allwinner,sun50i-h6-musb",
 				     "allwinner,sun8i-a33-musb";
@@ -470,6 +598,38 @@ 
 			status = "disabled";
 		};
 
+		dwc3: dwc3 at 5200000 {
+			compatible = "snps,dwc3";
+			reg = <0x05200000 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_XHCI>,
+				 <&ccu CLK_BUS_XHCI>,
+				 <&rtc 0>;
+			clock-names = "ref", "bus_early", "suspend";
+			resets = <&ccu RST_BUS_XHCI>;
+			/*
+			 * The datasheet of the chip doesn't declare the
+			 * peripheral function, and there's no boards known
+			 * to have a USB Type-B port routed to the port.
+			 * In addition, no one has tested the peripheral
+			 * function yet.
+			 * So set the dr_mode to "host" in the DTSI file.
+			 */
+			dr_mode = "host";
+			phys = <&usb3phy>;
+			phy-names = "usb3-phy";
+			status = "disabled";
+		};
+
+		usb3phy: phy at 5210000 {
+			compatible = "allwinner,sun50i-h6-usb3-phy";
+			reg = <0x5210000 0x10000>;
+			clocks = <&ccu CLK_USB_PHY1>;
+			resets = <&ccu RST_USB_PHY1>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		ehci3: usb at 5311000 {
 			compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
 			reg = <0x05311000 0x100>;
@@ -480,6 +640,7 @@ 
 			resets = <&ccu RST_BUS_OHCI3>,
 				 <&ccu RST_BUS_EHCI3>;
 			phys = <&usb2phy 3>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -491,6 +652,7 @@ 
 				 <&ccu CLK_USB_OHCI3>;
 			resets = <&ccu RST_BUS_OHCI3>;
 			phys = <&usb2phy 3>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -507,7 +669,7 @@ 
 			resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>;
 			reset-names = "ctrl", "hdcp";
 			phys = <&hdmi_phy>;
-			phy-names = "hdmi-phy";
+			phy-names = "phy";
 			pinctrl-names = "default";
 			pinctrl-0 = <&hdmi_pins>;
 			status = "disabled";
@@ -549,7 +711,6 @@ 
 				      "tcon-tv0";
 			clock-output-names = "tcon-top-tv0";
 			resets = <&ccu RST_BUS_TCON_TOP>;
-			reset-names = "rst";
 			#clock-cells = <1>;
 
 			ports {
@@ -636,10 +797,20 @@ 
 			};
 		};
 
+		rtc: rtc at 7000000 {
+			compatible = "allwinner,sun50i-h6-rtc";
+			reg = <0x07000000 0x400>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out", "iosc";
+			clocks = <&ext_osc32k>;
+			#clock-cells = <1>;
+		};
+
 		r_ccu: clock at 7010000 {
 			compatible = "allwinner,sun50i-h6-r-ccu";
 			reg = <0x07010000 0x400>;
-			clocks = <&osc24M>, <&osc32k>, <&iosc>,
+			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
 				 <&ccu CLK_PLL_PERIPH0>;
 			clock-names = "hosc", "losc", "iosc", "pll-periph";
 			#clock-cells = <1>;
@@ -651,6 +822,7 @@ 
 				     "allwinner,sun6i-a31-wdt";
 			reg = <0x07020400 0x20>;
 			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
 		};
 
 		r_intc: interrupt-controller at 7021000 {
@@ -667,7 +839,7 @@ 
 			reg = <0x07022000 0x400>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&osc32k>;
+			clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&rtc 0>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
@@ -678,10 +850,30 @@ 
 				pins = "PL0", "PL1";
 				function = "s_i2c";
 			};
+
+			r_ir_rx_pin: r-ir-rx-pin {
+				pins = "PL9";
+				function = "s_cir_rx";
+			};
+		};
+
+		r_ir: ir at 7040000 {
+				compatible = "allwinner,sun50i-h6-ir",
+					     "allwinner,sun6i-a31-ir";
+				reg = <0x07040000 0x400>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&r_ccu CLK_R_APB1_IR>,
+					 <&r_ccu CLK_IR>;
+				clock-names = "apb", "ir";
+				resets = <&r_ccu RST_R_APB1_IR>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&r_ir_rx_pin>;
+				status = "disabled";
 		};
 
 		r_i2c: i2c at 7081400 {
-			compatible = "allwinner,sun6i-a31-i2c";
+			compatible = "allwinner,sun50i-h6-i2c",
+				     "allwinner,sun6i-a31-i2c";
 			reg = <0x07081400 0x400>;
 			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&r_ccu CLK_R_APB2_I2C>;
@@ -692,5 +884,31 @@ 
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
+
+		ths: thermal-sensor at 5070400 {
+			compatible = "allwinner,sun50i-h6-ths";
+			reg = <0x05070400 0x100>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>;
+			clock-names = "bus";
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
 	};
 };