diff mbox series

ARM: socfpga: Add initial support for the ABB SECU board

Message ID 20200217173249.4805-1-marex@denx.de
State Superseded
Headers show
Series ARM: socfpga: Add initial support for the ABB SECU board | expand

Commit Message

Marek Vasut Feb. 17, 2020, 5:32 p.m. UTC
From: Holger Brunck <holger.brunck at ch.abb.com>

Add initial support for the ABB SECU board, which is an ArriaV-based
SoCFPGA system with ethernet and booting from Denali NAND.

Signed-off-by: Holger Brunck <holger.brunck at ch.abb.com>
Cc: Ley Foon Tan <ley.foon.tan at intel.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
---
 arch/arm/dts/Makefile                   |   1 +
 arch/arm/dts/socfpga_arria5_secu1.dts   | 130 +++++
 arch/arm/mach-socfpga/Kconfig           |  10 +
 board/keymile/Kconfig                   |  11 +-
 board/keymile/common/ivm.c              |  18 +-
 board/keymile/secu1/Makefile            |   7 +
 board/keymile/secu1/qts/iocsr_config.h  | 694 ++++++++++++++++++++++++
 board/keymile/secu1/qts/pinmux_config.h | 218 ++++++++
 board/keymile/secu1/qts/pll_config.h    |  83 +++
 board/keymile/secu1/qts/sdram_config.h  | 327 +++++++++++
 board/keymile/secu1/socfpga.c           |  67 +++
 configs/socfpga_secu1_defconfig         |  83 +++
 include/configs/socfpga_arria5_secu1.h  | 131 +++++
 13 files changed, 1776 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/dts/socfpga_arria5_secu1.dts
 create mode 100644 board/keymile/secu1/Makefile
 create mode 100644 board/keymile/secu1/qts/iocsr_config.h
 create mode 100644 board/keymile/secu1/qts/pinmux_config.h
 create mode 100644 board/keymile/secu1/qts/pll_config.h
 create mode 100644 board/keymile/secu1/qts/sdram_config.h
 create mode 100644 board/keymile/secu1/socfpga.c
 create mode 100644 configs/socfpga_secu1_defconfig
 create mode 100644 include/configs/socfpga_arria5_secu1.h

Comments

Wolfgang Denk Feb. 17, 2020, 5:51 p.m. UTC | #1
Dear Marek,

In message <20200217173249.4805-1-marex at denx.de> you wrote:
>
>  board/keymile/Kconfig                   |  11 +-
>  board/keymile/common/ivm.c              |  18 +-
>  board/keymile/secu1/Makefile            |   7 +
>  board/keymile/secu1/qts/iocsr_config.h  | 694 ++++++++++++++++++++++++
>  board/keymile/secu1/qts/pinmux_config.h | 218 ++++++++
>  board/keymile/secu1/qts/pll_config.h    |  83 +++
>  board/keymile/secu1/qts/sdram_config.h  | 327 +++++++++++
>  board/keymile/secu1/socfpga.c           |  67 +++
...
> +	select VENDOR_KM

Would it make sense to rename keymile -> abb (or abb-ch) here
(ditto for KM in the config options / macro names) ?

Best regards,

Wolfgang Denk
Marek Vasut Feb. 17, 2020, 5:52 p.m. UTC | #2
On 2/17/20 6:51 PM, Wolfgang Denk wrote:
> Dear Marek,

Hi,

> In message <20200217173249.4805-1-marex at denx.de> you wrote:
>>
>>  board/keymile/Kconfig                   |  11 +-
>>  board/keymile/common/ivm.c              |  18 +-
>>  board/keymile/secu1/Makefile            |   7 +
>>  board/keymile/secu1/qts/iocsr_config.h  | 694 ++++++++++++++++++++++++
>>  board/keymile/secu1/qts/pinmux_config.h | 218 ++++++++
>>  board/keymile/secu1/qts/pll_config.h    |  83 +++
>>  board/keymile/secu1/qts/sdram_config.h  | 327 +++++++++++
>>  board/keymile/secu1/socfpga.c           |  67 +++
> ...
>> +	select VENDOR_KM
> 
> Would it make sense to rename keymile -> abb (or abb-ch) here
> (ditto for KM in the config options / macro names) ?

This is more of a question for Holger, but I agree the renaming should
eventually happen to align it with current state of things.
Tan, Ley Foon Feb. 18, 2020, 12:54 a.m. UTC | #3
> -----Original Message-----
> From: Marek Vasut <marex at denx.de>
> Sent: Tuesday, February 18, 2020 1:33 AM
> To: u-boot at lists.denx.de
> Cc: Holger Brunck <holger.brunck at ch.abb.com>; Tan, Ley Foon
> <ley.foon.tan at intel.com>; Simon Goldschmidt
> <simon.k.r.goldschmidt at gmail.com>
> Subject: [PATCH] ARM: socfpga: Add initial support for the ABB SECU board
> 
> From: Holger Brunck <holger.brunck at ch.abb.com>
> 
> Add initial support for the ABB SECU board, which is an ArriaV-based
> SoCFPGA system with ethernet and booting from Denali NAND.
> 
> Signed-off-by: Holger Brunck <holger.brunck at ch.abb.com>
> Cc: Ley Foon Tan <ley.foon.tan at intel.com>
> Cc: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
> ---
>  arch/arm/dts/Makefile                   |   1 +
>  arch/arm/dts/socfpga_arria5_secu1.dts   | 130 +++++
>  arch/arm/mach-socfpga/Kconfig           |  10 +
>  board/keymile/Kconfig                   |  11 +-
>  board/keymile/common/ivm.c              |  18 +-
>  board/keymile/secu1/Makefile            |   7 +
>  board/keymile/secu1/qts/iocsr_config.h  | 694
> ++++++++++++++++++++++++  board/keymile/secu1/qts/pinmux_config.h |
> 218 ++++++++
>  board/keymile/secu1/qts/pll_config.h    |  83 +++
>  board/keymile/secu1/qts/sdram_config.h  | 327 +++++++++++
>  board/keymile/secu1/socfpga.c           |  67 +++
>  configs/socfpga_secu1_defconfig         |  83 +++
>  include/configs/socfpga_arria5_secu1.h  | 131 +++++
>  13 files changed, 1776 insertions(+), 4 deletions(-)  create mode 100644
> arch/arm/dts/socfpga_arria5_secu1.dts
>  create mode 100644 board/keymile/secu1/Makefile  create mode 100644
> board/keymile/secu1/qts/iocsr_config.h
>  create mode 100644 board/keymile/secu1/qts/pinmux_config.h
>  create mode 100644 board/keymile/secu1/qts/pll_config.h
>  create mode 100644 board/keymile/secu1/qts/sdram_config.h
>  create mode 100644 board/keymile/secu1/socfpga.c  create mode 100644
> configs/socfpga_secu1_defconfig  create mode 100644
> include/configs/socfpga_arria5_secu1.h
> 
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index
> be4cf029d0..9c593b2c98 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -333,6 +333,7 @@ dtb-$(CONFIG_THUNDERX) += thunderx-88xx.dtb
> 
>  dtb-$(CONFIG_ARCH_SOCFPGA) +=				\
>  	socfpga_agilex_socdk.dtb			\
> +	socfpga_arria5_secu1.dtb			\
>  	socfpga_arria5_socdk.dtb			\
>  	socfpga_arria10_socdk_sdmmc.dtb			\
>  	socfpga_cyclone5_mcvevk.dtb			\
> diff --git a/arch/arm/dts/socfpga_arria5_secu1.dts
> b/arch/arm/dts/socfpga_arria5_secu1.dts
> new file mode 100644
> index 0000000000..dadf766682
> --- /dev/null
> +++ b/arch/arm/dts/socfpga_arria5_secu1.dts
> @@ -0,0 +1,130 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2016-2020 ABB
> + */
> +
> +#include "socfpga_arria5.dtsi"
> +#include "socfpga-common-u-boot.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +	model = "ABB SoC SECU1 Board";
> +	compatible = "altr,socfpga-secu1", "altr,socfpga";
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +		bootargs = "console=ttyS0,115200";
> +	};
> +
> +	memory {
> +		name = "memory";
> +		device_type = "memory";
> +		reg = <0x0 0x20000000>; /* 512MB */
> +	};
> +
> +	aliases {
> +		/*
> +		 * this allow the ethaddr uboot environment variable
> contents
> +		 * to be added to the gmac0 device tree blob.
> +		 */
> +		ethernet0 = &gmac0;
> +		spi0 = &spi1;
> +	};
> +
> +	i2c_gpio: i2c at 0 {
> +		compatible = "i2c-gpio";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		gpios = <&portc 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
> 	/* SDA */
> +			 &portc 6
> (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;	/* SCL */
> +		i2c-gpio,delay-us = <5>;	/* ~100 kHz */
> +		i2c-gpio,deblock;
> +
> +		temp_sensor at 48 {
> +			compatible = "national,lm75";
> +			reg = <0x48>;
> +		};
> +
> +		eeprom at 50 {
> +			compatible = "at,24c08";
> +			reg = <0x50>;
> +		};
> +
> +		rtc: rtc at 68 {
> +			compatible = "st,m41st87";
> +			reg = <0x68>;
> +			interrupt-parent = <&intc>;
> +			interrupts = <0 42 0x4>;
> +		};
> +	};
> +
> +	regulator_3_3v: 3-3-v-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "3.3V";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +};
> +
> +&gmac0 {
> +	status = "okay";
> +	phy-mode = "rgmii";
> +	fixed-link {
> +		speed = <1000>;
> +		full-duplex;
> +	};
> +};
> +
> +&gpio0 {
> +	status = "okay";
> +};
> +
> +&gpio1 {
> +	status = "okay";
> +};
> +
> +&gpio2 {
> +	status = "okay";
> +};
> +
> +&mmc0 {
> +	vmmc-supply = <&regulator_3_3v>;
> +	vqmmc-supply = <&regulator_3_3v>;
> +	bus-width = <4>;
> +	u-boot,dm-pre-reloc;
> +};
> +
> +&nand0 {
> +	status = "okay";
> +};
> +
> +&porta {
> +	bank-name = "porta";
> +};
> +
> +&portb {
> +	bank-name = "portb";
> +};
> +
> +&portc {
> +	bank-name = "portc";
> +};
> +
> +&spi1 {
> +	status = "okay";
> +};
> +
> +&uart0 {
> +	clock-frequency = <100000000>;
> +	u-boot,dm-pre-reloc;
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	clock-frequency = <100000000>;
> +};
> +
> +&watchdog0 {
> +	u-boot,dm-pre-reloc;
> +	status = "okay";
> +};
> diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-
> socfpga/Kconfig index 969698c83f..38d6c1b2ba 100644
> --- a/arch/arm/mach-socfpga/Kconfig
> +++ b/arch/arm/mach-socfpga/Kconfig
> @@ -96,6 +96,11 @@ config TARGET_SOCFPGA_ARRIA10_SOCDK
>  	bool "Altera SOCFPGA SoCDK (Arria 10)"
>  	select TARGET_SOCFPGA_ARRIA10
> 
> +config TARGET_SOCFPGA_ARRIA5_SECU1
> +	bool "ABB SECU1 (Arria V)"
> +	select TARGET_SOCFPGA_ARRIA5
> +	select VENDOR_KM
> +
>  config TARGET_SOCFPGA_ARRIA5_SOCDK
>  	bool "Altera SOCFPGA SoCDK (Arria V)"
>  	select TARGET_SOCFPGA_ARRIA5
> @@ -158,6 +163,7 @@ config SYS_BOARD
>  	default "de10-nano" if TARGET_SOCFPGA_TERASIC_DE10_NANO
>  	default "is1" if TARGET_SOCFPGA_IS1
>  	default "mcvevk" if TARGET_SOCFPGA_ARIES_MCVEVK
> +	default "secu1" if TARGET_SOCFPGA_ARRIA5_SECU1
>  	default "sockit" if TARGET_SOCFPGA_TERASIC_SOCKIT
>  	default "socrates" if TARGET_SOCFPGA_EBV_SOCRATES
>  	default "sr1500" if TARGET_SOCFPGA_SR1500 @@ -173,6 +179,7
> @@ config SYS_VENDOR
>  	default "aries" if TARGET_SOCFPGA_ARIES_MCVEVK
>  	default "devboards" if TARGET_SOCFPGA_DEVBOARDS_DBM_SOC1
>  	default "ebv" if TARGET_SOCFPGA_EBV_SOCRATES
> +	default "keymile" if TARGET_SOCFPGA_ARRIA5_SECU1
>  	default "softing" if TARGET_SOCFPGA_SOFTING_VINING_FPGA
>  	default "terasic" if TARGET_SOCFPGA_TERASIC_DE0_NANO
>  	default "terasic" if TARGET_SOCFPGA_TERASIC_DE1_SOC @@ -
> 184,6 +191,7 @@ config SYS_SOC
> 
>  config SYS_CONFIG_NAME
>  	default "socfpga_agilex_socdk" if TARGET_SOCFPGA_AGILEX_SOCDK
> +	default "socfpga_arria5_secu1" if TARGET_SOCFPGA_ARRIA5_SECU1
>  	default "socfpga_arria5_socdk" if
> TARGET_SOCFPGA_ARRIA5_SOCDK
>  	default "socfpga_arria10_socdk" if
> TARGET_SOCFPGA_ARRIA10_SOCDK
>  	default "socfpga_cyclone5_socdk" if
> TARGET_SOCFPGA_CYCLONE5_SOCDK @@ -199,4 +207,6 @@ config
> SYS_CONFIG_NAME
>  	default "socfpga_stratix10_socdk" if
> TARGET_SOCFPGA_STRATIX10_SOCDK
>  	default "socfpga_vining_fpga" if
> TARGET_SOCFPGA_SOFTING_VINING_FPGA
> 
> +source "board/keymile/Kconfig"
> +
>  endif
> diff --git a/board/keymile/Kconfig b/board/keymile/Kconfig index
> 634dbbe097..7f4cad86aa 100644
> --- a/board/keymile/Kconfig
> +++ b/board/keymile/Kconfig
> @@ -14,6 +14,7 @@ menu "KM Board Setup"
>  config KM_PNVRAM
>  	hex "Pseudo RAM"
>  	default 0x80000
> +	depends on !ARCH_SOCFPGA
>  	help
>  	  Start address of the pseudo non-volatile RAM for application.
> 
> @@ -21,6 +22,7 @@ config KM_PHRAM
>  	hex "Physical RAM"
>  	default 0x17F000 if ARM
>  	default 0x100000 if PPC
> +	depends on !ARCH_SOCFPGA
>  	help
>  	  Start address of the physical RAM, which is the mounted /var folder.
> 
> @@ -29,6 +31,7 @@ config KM_RESERVED_PRAM
>  	default 0x801000 if KIRKWOOD
>  	default 0x0 if MPC83xx
>  	default 0x1000 if MPC85xx
> +	depends on !ARCH_SOCFPGA
>  	help
>  	  Reserved physical RAM area at the end of memory for special
> purposes.
> 
> @@ -37,6 +40,7 @@ config KM_CRAMFS_ADDR
>  	default 0x2400000 if KIRKWOOD
>  	default 0xC00000 if MPC83xx
>  	default 0x2000000 if MPC85xx
> +	depends on !ARCH_SOCFPGA
>  	help
>  	  Start address of the CRAMFS containing the Linux kernel.
> 
> @@ -44,13 +48,13 @@ config KM_KERNEL_ADDR
>  	hex "Kernel Load Address"
>  	default 0x2000000 if KIRKWOOD
>  	default 0x400000 if MPC83xx
> -	default 0x1000000 if MPC85xx
> +	default 0x1000000 if MPC85xx || ARCH_SOCFPGA
>  	help
>  	  Address where to load Linux kernel in RAM.
> 
>  config KM_FDT_ADDR
>  	hex "FDT Load Address"
> -	default 0x23E0000 if KIRKWOOD
> +	default 0x23E0000 if KIRKWOOD || ARCH_SOCFPGA
>  	default 0xB80000 if MPC83xx
>  	default 0x1F80000 if MPC85xx
>  	help
> @@ -71,7 +75,7 @@ config KM_DEF_NETDEV
>  config KM_COMMON_ETH_INIT
>  	bool "Common Ethernet Initialization"
>  	default y if KIRKWOOD || MPC83xx
> -	default n if MPC85xx
> +	default n if MPC85xx || ARCH_SOCFPGA
>  	help
>  	  Use the Ethernet initialization implemented in common code, which
>  	  detects if a Piggy board is present.
> @@ -91,6 +95,7 @@ config KM_MVEXTSW_ADDR
> 
>  config KM_IVM_BUS
>  	int "IVM I2C Bus"
> +	default 0 if ARCH_SOCFPGA
>  	default 1 if KIRKWOOD || MPC85xx
>  	default 2 if MPC83xx
>  	help
> diff --git a/board/keymile/common/ivm.c b/board/keymile/common/ivm.c
> index fee7f03c8c..80dae73bb6 100644
> --- a/board/keymile/common/ivm.c
> +++ b/board/keymile/common/ivm.c
> @@ -328,7 +328,23 @@ static int ivm_populate_env(unsigned char *buf, int
> len, int mac_address_offset)  int ivm_read_eeprom(unsigned char *buf, int
> len, int mac_address_offset)  {
>  	int ret;
> +#ifdef CONFIG_DM_I2C
> +	struct udevice *eedev = NULL;
> +
> +	ret = i2c_get_chip_for_busnum(CONFIG_KM_IVM_BUS,
> +				      CONFIG_SYS_I2C_EEPROM_ADDR, 1,
> &eedev);
> +	if (ret) {
> +		printf("failed to get device for EEPROM at address 0x50\n");
	Should change 0x50 to value of CONFIG_SYS_I2C_EEPROM_ADDR.
> +		return 1;
> +	}
> 
> +	ret = dm_i2c_read(eedev, 0, buf, len);
> +	if (ret != 0) {
> +		printf("Error: Unable to read from I2C EEPROM at
> address %02X:%02X\n",
> +		       CONFIG_SYS_I2C_EEPROM_ADDR, 0);
> +		return 1;
> +	}
> +#else
>  	i2c_set_bus_num(CONFIG_KM_IVM_BUS);
>  	/* add deblocking here */
>  	i2c_make_abort();
> @@ -338,6 +354,6 @@ int ivm_read_eeprom(unsigned char *buf, int len, int
> mac_address_offset)
>  		printf("Error reading EEprom\n");
>  		return -2;
>  	}
> -
> +#endif
>  	return ivm_populate_env(buf, len, mac_address_offset);  } diff --git
> a/board/keymile/secu1/Makefile b/board/keymile/secu1/Makefile new file
> mode 100644 index 0000000000..4704d59e48
> --- /dev/null
> +++ b/board/keymile/secu1/Makefile
> @@ -0,0 +1,7 @@
> +#
> +# (C) Copyright 2020 ABB
> +#
> +# SPDX-License-Identifier:	GPL-2.0+
> +#
> +
> +obj-y	:= socfpga.o ../common/ivm.o
> diff --git a/board/keymile/secu1/qts/iocsr_config.h
> b/board/keymile/secu1/qts/iocsr_config.h
> new file mode 100644
> index 0000000000..7640c56db1
> --- /dev/null
> +++ b/board/keymile/secu1/qts/iocsr_config.h
> @@ -0,0 +1,694 @@
> +/* SPDX-License-Identifier: BSD-3-Clause */
> +/*
> + * Altera SoCFPGA IOCSR configuration
> + */
> +
> +#ifndef __SOCFPGA_IOCSR_CONFIG_H__
> +#define __SOCFPGA_IOCSR_CONFIG_H__
> +
> +#define CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH	1337
> +#define CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH	1719
> +#define CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH	1528
> +#define CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH	16766
> +
> +const unsigned long iocsr_scan_chain0_table[] = {
> +	0x00100000,
> +	0x40000000,
> +	0x00000000,
> +	0x00000100,
> +	0x00040000,
> +	0x00008000,
> +	0x00080000,
> +	0x20000000,
> +	0x00000000,
> +	0x00000080,
> +	0x00020000,
> +	0x00004000,
> +	0x00040000,
> +	0x10000000,
> +	0x00000000,
> +	0x00000040,
> +	0x00010000,
> +	0x00002000,
> +	0x00000000,
> +	0x00000000,
> +	0x00000000,
> +	0x00000020,
> +	0x00008000,
> +	0x00001000,
> +	0x00000000,
> +	0x0300C000,
> +	0x0000000C,
> +	0x00000000,
> +	0x00000000,
> +	0x00000800,
> +	0x01806018,
> +	0x00000000,
> +	0x01800000,
> +	0x00001806,
> +	0x00001806,
> +	0x00000400,
> +	0x00C0300C,
> +	0x00C03000,
> +	0x00C00003,
> +	0x00000C03,
> +	0x00300C03,
> +	0x00000200,
> +};
> +
> +const unsigned long iocsr_scan_chain1_table[] = {
> +	0x00100000,
> +	0x40000000,
> +	0x00000000,
> +	0x00000100,
> +	0x00040000,
> +	0x00008000,
> +	0x00060180,
> +	0x18060000,
> +	0x00000000,
> +	0x00000080,
> +	0x00020000,
> +	0x00004000,
> +	0x00040000,
> +	0x10000000,
> +	0x00000000,
> +	0x00000040,
> +	0x00010000,
> +	0x00002000,
> +	0x00020000,
> +	0x08000000,
> +	0x01FE0000,
> +	0xF8000000,
> +	0x00000007,
> +	0x00001000,
> +	0x00010000,
> +	0x04000000,
> +	0x00000000,
> +	0x00000010,
> +	0x00004000,
> +	0x00000800,
> +	0x00006018,
> +	0x01806000,
> +	0x00000006,
> +	0x00000008,
> +	0x00601806,
> +	0x00000400,
> +	0x0000300C,
> +	0x00C03000,
> +	0x00C00000,
> +	0x00000003,
> +	0x00000C03,
> +	0x00000200,
> +	0x00000000,
> +	0x00601800,
> +	0x80600000,
> +	0x80000001,
> +	0x00000601,
> +	0x00000100,
> +	0x00300C03,
> +	0xC0300C00,
> +	0xC0300000,
> +	0xC0000300,
> +	0x000C0300,
> +	0x00000080,
> +};
> +
> +const unsigned long iocsr_scan_chain2_table[] = {
> +	0x00100000,
> +	0x40000000,
> +	0x00000000,
> +	0x00000100,
> +	0x00040000,
> +	0x00008000,
> +	0x00080000,
> +	0x20000000,
> +	0x00000000,
> +	0x00000080,
> +	0x00020000,
> +	0x00004000,
> +	0x00040000,
> +	0x10000000,
> +	0x00000000,
> +	0x00000040,
> +	0x00010000,
> +	0x00002000,
> +	0x00018060,
> +	0x08000000,
> +	0x00000000,
> +	0x00000020,
> +	0x00008000,
> +	0x00001000,
> +	0x0300C030,
> +	0x00000000,
> +	0x03000000,
> +	0x0000000C,
> +	0x00C0300C,
> +	0x00000800,
> +	0x01806018,
> +	0x01806000,
> +	0x00000006,
> +	0x00000000,
> +	0x00601806,
> +	0x00000400,
> +	0x00C0300C,
> +	0x00C03000,
> +	0x00C00003,
> +	0x00000C03,
> +	0x00300C03,
> +	0x00000200,
> +	0x00601806,
> +	0x80601800,
> +	0x80600001,
> +	0x80000601,
> +	0x00180601,
> +	0x00000100,
> +};
> +
> +const unsigned long iocsr_scan_chain3_table[] = {
> +	0x2CC20D80,
> +	0x082000FF,
> +	0x08028001,
> +	0x00100000,
> +	0x08020000,
> +	0x00100000,
> +	0x0A800000,
> +	0x07900000,
> +	0x08020000,
> +	0x00100000,
> +	0x00000000,
> +	0xC0000010,
> +	0x00C00512,
> +	0x00000000,
> +	0x00000021,
> +	0x82000004,
> +	0x05400000,
> +	0x03C80000,
> +	0x04010000,
> +	0x00080000,
> +	0x05400000,
> +	0x03C80000,
> +	0x05400000,
> +	0x03C80000,
> +	0xA2580000,
> +	0x60001800,
> +	0x00600289,
> +	0x800A2580,
> +	0x00000001,
> +	0x40000002,
> +	0x02A00000,
> +	0x01E40000,
> +	0x02A00000,
> +	0x01E40000,
> +	0x02A00000,
> +	0x01E40000,
> +	0x02A00000,
> +	0x01E40000,
> +	0x512C0000,
> +	0xB0000C00,
> +	0x00300144,
> +	0xC00512C0,
> +	0x144B0000,
> +	0x20000300,
> +	0x00040000,
> +	0x50670000,
> +	0x00000050,
> +	0x24590000,
> +	0x00001000,
> +	0xA0000034,
> +	0x0D000001,
> +	0xA0680514,
> +	0xC3034028,
> +	0x06181A00,
> +	0x805140D0,
> +	0x34069A06,
> +	0x01A034D0,
> +	0x240D0000,
> +	0x28A06809,
> +	0x00000340,
> +	0xD000001A,
> +	0x06809240,
> +	0x10040000,
> +	0x00200000,
> +	0x10040000,
> +	0x00200000,
> +	0x15000000,
> +	0x0F200000,
> +	0x15000000,
> +	0x0F200000,
> +	0x01FE0000,
> +	0x80000000,
> +	0x01800A25,
> +	0x00289600,
> +	0x007F8006,
> +	0x00000000,
> +	0x0A800001,
> +	0x07900000,
> +	0x0A800000,
> +	0x07900000,
> +	0x0A800000,
> +	0x07900000,
> +	0x08020000,
> +	0x00100000,
> +	0x44B00000,
> +	0xC0003001,
> +	0x00C00512,
> +	0x00000FF0,
> +	0x512C0000,
> +	0x80000C00,
> +	0x05400000,
> +	0x02480000,
> +	0x04000000,
> +	0x00080000,
> +	0x05400000,
> +	0x03C80000,
> +	0x05400000,
> +	0x03C80000,
> +	0x581D8000,
> +	0x60001800,
> +	0x00600289,
> +	0x800A2580,
> +	0x16076001,
> +	0x40000600,
> +	0x02A00040,
> +	0x01E40000,
> +	0x02A00000,
> +	0x01E40000,
> +	0x02A00000,
> +	0x01E40000,
> +	0x02A00000,
> +	0x01E40000,
> +	0x512C0000,
> +	0xB0000C00,
> +	0x00300144,
> +	0xC00512C0,
> +	0x144B0000,
> +	0x20000300,
> +	0x00040000,
> +	0x50670000,
> +	0x00000050,
> +	0x24590000,
> +	0x00001000,
> +	0xA0000034,
> +	0x0D000001,
> +	0xA0680514,
> +	0x4D034028,
> +	0x1A681A03,
> +	0x805140D0,
> +	0x34069A06,
> +	0x01A00020,
> +	0x240D0001,
> +	0x49206809,
> +	0x034D0340,
> +	0xD01A681A,
> +	0x06805140,
> +	0x10040000,
> +	0x00200000,
> +	0x10040000,
> +	0x00200000,
> +	0x15000000,
> +	0x0F200000,
> +	0x15000000,
> +	0x0F200000,
> +	0x01FE0000,
> +	0x80000000,
> +	0x01800A25,
> +	0x00289600,
> +	0x007F8006,
> +	0x00000000,
> +	0x99300001,
> +	0x34343400,
> +	0xAA0D4000,
> +	0x01C3A800,
> +	0xAA0D4000,
> +	0x01C3A800,
> +	0xAA0D4000,
> +	0x01C3A800,
> +	0x00040100,
> +	0x00000800,
> +	0x00000000,
> +	0x00001208,
> +	0x00482000,
> +	0x01000000,
> +	0x00000000,
> +	0x00410482,
> +	0x0006A000,
> +	0x0001B400,
> +	0x00020000,
> +	0x00000400,
> +	0x0002A000,
> +	0x0001E400,
> +	0x5506A000,
> +	0x00E1D400,
> +	0x00000000,
> +	0x44B0090C,
> +	0x00003001,
> +	0x90400000,
> +	0x00000000,
> +	0x2020C243,
> +	0x2A835000,
> +	0x0070EA00,
> +	0x2A835000,
> +	0x0070EA00,
> +	0x2A835000,
> +	0x0070EA00,
> +	0x00010040,
> +	0x00000200,
> +	0x00000000,
> +	0x00000482,
> +	0x00120800,
> +	0x00002000,
> +	0x80000000,
> +	0x00104120,
> +	0x00000200,
> +	0xAC0D5F80,
> +	0xFFFFFFFF,
> +	0x14F3690D,
> +	0x1A041414,
> +	0x00D00000,
> +	0x1C864000,
> +	0x45147A07,
> +	0xA228A3DA,
> +	0xF491451E,
> +	0x0358D348,
> +	0x821A0000,
> +	0x0000D000,
> +	0x028A0680,
> +	0xDA79E47A,
> +	0x1EA228A3,
> +	0xC8F49965,
> +	0x000344B2,
> +	0x00080000,
> +	0x00001000,
> +	0x00080200,
> +	0x00001000,
> +	0x000A8000,
> +	0x00075000,
> +	0x541A8000,
> +	0x03875001,
> +	0x00000000,
> +	0x00000020,
> +	0x0080C000,
> +	0x41000000,
> +	0x00003FC2,
> +	0x00820000,
> +	0xAA0D4000,
> +	0x01C3A800,
> +	0xAA0D4000,
> +	0x01C3A800,
> +	0xAA0D4000,
> +	0x01C3A800,
> +	0x00040000,
> +	0x00000800,
> +	0x00000000,
> +	0x00001208,
> +	0x00482000,
> +	0x01000000,
> +	0x00000000,
> +	0x00410482,
> +	0x0006A000,
> +	0x0001B400,
> +	0x00020000,
> +	0x00000400,
> +	0x00020080,
> +	0x00000400,
> +	0x5506A000,
> +	0x00E1D400,
> +	0x00000000,
> +	0x0000090C,
> +	0x00000010,
> +	0x90400000,
> +	0x00000000,
> +	0x2020C243,
> +	0x2A835000,
> +	0x0070EA00,
> +	0x2A835000,
> +	0x0070EA00,
> +	0x2A835000,
> +	0x0070EA00,
> +	0x00015000,
> +	0x0000F200,
> +	0x00000000,
> +	0x00000482,
> +	0x60120800,
> +	0x00600289,
> +	0x80000000,
> +	0x00104120,
> +	0x00000200,
> +	0xAC0D5F80,
> +	0xFFFFFFFF,
> +	0x14F3690D,
> +	0x1A041414,
> +	0x00D00000,
> +	0x14864000,
> +	0x59647A05,
> +	0xC228A3DC,
> +	0xF491451E,
> +	0x0344B2C8,
> +	0x821A034D,
> +	0x0000D000,
> +	0x00000680,
> +	0xD469A47A,
> +	0x1E83CF23,
> +	0xC8F71E79,
> +	0x000344B2,
> +	0x00080000,
> +	0x00001000,
> +	0x00080000,
> +	0x00001000,
> +	0x000A8000,
> +	0x00075000,
> +	0x541A8000,
> +	0x03875001,
> +	0x00000000,
> +	0x00000020,
> +	0x0080C000,
> +	0x41000000,
> +	0x00000002,
> +	0x00820008,
> +	0xAA0D4000,
> +	0x01C3A800,
> +	0xAA0D4000,
> +	0x01C3A800,
> +	0xAA0D4000,
> +	0x01C3A800,
> +	0x00040000,
> +	0x00000800,
> +	0x00000000,
> +	0x00001208,
> +	0x00482000,
> +	0x01000000,
> +	0x00000000,
> +	0x00410482,
> +	0x0006A000,
> +	0x0001B400,
> +	0x00020000,
> +	0x00000400,
> +	0x00020080,
> +	0x00000400,
> +	0x5506A000,
> +	0x00E1D400,
> +	0x00000000,
> +	0x0000090C,
> +	0x00000010,
> +	0x90400000,
> +	0x00000000,
> +	0x2020C243,
> +	0x2A835000,
> +	0x0070EA00,
> +	0x2A835000,
> +	0x0070EA00,
> +	0x2A835000,
> +	0x0070EA00,
> +	0x00010000,
> +	0x00000200,
> +	0x00000000,
> +	0x00000482,
> +	0x00120800,
> +	0x00400000,
> +	0x80000000,
> +	0x00104120,
> +	0x00000200,
> +	0xAC0D5F80,
> +	0xFFFFFFFF,
> +	0x14F1690D,
> +	0x1A041414,
> +	0x00D00000,
> +	0x0C864000,
> +	0x79E47A03,
> +	0x92AAA3D2,
> +	0xF595551E,
> +	0x034CF3C8,
> +	0x821A0000,
> +	0x0000D000,
> +	0x00000680,
> +	0xDA79E47A,
> +	0x1EA32CA3,
> +	0xC8F69965,
> +	0x000354F3,
> +	0x00080000,
> +	0x00001000,
> +	0x00080000,
> +	0x00001000,
> +	0x000A8000,
> +	0x00075000,
> +	0x541A8000,
> +	0x03875001,
> +	0x00000000,
> +	0x00000020,
> +	0x0080C000,
> +	0x41000000,
> +	0x00000002,
> +	0x00820008,
> +	0xAA0D4000,
> +	0x01C3A800,
> +	0xAA0D4000,
> +	0x01C3A800,
> +	0xAA0D4000,
> +	0x01C3A800,
> +	0x00040000,
> +	0x00000800,
> +	0x00000000,
> +	0x00001208,
> +	0x00482000,
> +	0x01000000,
> +	0x00000000,
> +	0x00410482,
> +	0x0006A000,
> +	0x0001B400,
> +	0x00020000,
> +	0x00000400,
> +	0x00020000,
> +	0x00000400,
> +	0x5506A000,
> +	0x00E1D400,
> +	0x00000000,
> +	0x0000090C,
> +	0x00002000,
> +	0x90400000,
> +	0x00000000,
> +	0x2020C243,
> +	0x2A835000,
> +	0x0070EA00,
> +	0x2A835000,
> +	0x0070EA00,
> +	0x2A835000,
> +	0x0070EA00,
> +	0x00010040,
> +	0x00000200,
> +	0x00000000,
> +	0x00000482,
> +	0x00120800,
> +	0x00400000,
> +	0x80000000,
> +	0x00104120,
> +	0x00000200,
> +	0xAC0D5F80,
> +	0xFFFFFFFF,
> +	0x14F1690D,
> +	0x1A041414,
> +	0x00D00000,
> +	0x0C864000,
> +	0x59647A03,
> +	0xC3CF23DC,
> +	0xF711451E,
> +	0x0358D348,
> +	0x821A0000,
> +	0x0000D000,
> +	0x00000680,
> +	0xD459647A,
> +	0x1E83CF23,
> +	0x48F51E79,
> +	0x000348D3,
> +	0x00080000,
> +	0x00001000,
> +	0x00080000,
> +	0x00001000,
> +	0x000A8000,
> +	0x00075000,
> +	0x541A8000,
> +	0x03875001,
> +	0x00000000,
> +	0x00000020,
> +	0x0080C000,
> +	0x41000000,
> +	0x00000002,
> +	0x00820008,
> +	0x00489800,
> +	0x801A1A1A,
> +	0x00000200,
> +	0x80000004,
> +	0x00000200,
> +	0x80000004,
> +	0x00000200,
> +	0x00000004,
> +	0x00000200,
> +	0x00000004,
> +	0x00040000,
> +	0x10000000,
> +	0x00000000,
> +	0x00008000,
> +	0x00010000,
> +	0x40002000,
> +	0x00000100,
> +	0x40000002,
> +	0x00000100,
> +	0x00000002,
> +	0x00000100,
> +	0x40000002,
> +	0x00000100,
> +	0x00000002,
> +	0x00020000,
> +	0x00000000,
> +	0x00000010,
> +	0x00000020,
> +	0x00008000,
> +	0x20001000,
> +	0x00000080,
> +	0x20000001,
> +	0x00000080,
> +	0x20000001,
> +	0x00000080,
> +	0x20000001,
> +	0x00000080,
> +	0x00000001,
> +	0x00010000,
> +	0x04000000,
> +	0x00FF0000,
> +	0x00000000,
> +	0x00004000,
> +	0x00000800,
> +	0xC0000001,
> +	0x00141419,
> +	0x40000000,
> +	0x04000816,
> +	0x000D0000,
> +	0x00006800,
> +	0x00000340,
> +	0xD000001A,
> +	0x06800000,
> +	0x00340000,
> +	0x0001A000,
> +	0x00000D00,
> +	0x40000068,
> +	0x1A000003,
> +	0x00D00000,
> +	0x00068000,
> +	0x00003400,
> +	0x000001A0,
> +	0x00000401,
> +	0x00000008,
> +	0x00000401,
> +	0x00000008,
> +	0x00000401,
> +	0x00000008,
> +	0x00000401,
> +	0x80000008,
> +	0x0000007F,
> +	0x20000000,
> +	0x00000000,
> +	0xE0000080,
> +	0x0000001F,
> +	0x00004000,
> +};
> +
> +#endif /* __SOCFPGA_IOCSR_CONFIG_H__ */
> diff --git a/board/keymile/secu1/qts/pinmux_config.h
> b/board/keymile/secu1/qts/pinmux_config.h
> new file mode 100644
> index 0000000000..a9406060ed
> --- /dev/null
> +++ b/board/keymile/secu1/qts/pinmux_config.h
> @@ -0,0 +1,218 @@
> +/* SPDX-License-Identifier: BSD-3-Clause */
> +/*
> + * Altera SoCFPGA PinMux configuration
> + */
> +
> +#ifndef __SOCFPGA_PINMUX_CONFIG_H__
> +#define __SOCFPGA_PINMUX_CONFIG_H__
> +
> +const u8 sys_mgr_init_table[] = {
> +	3, /* EMACIO0 */
> +	3, /* EMACIO1 */
> +	3, /* EMACIO2 */
> +	3, /* EMACIO3 */
> +	3, /* EMACIO4 */
> +	3, /* EMACIO5 */
> +	3, /* EMACIO6 */
> +	3, /* EMACIO7 */
> +	3, /* EMACIO8 */
> +	3, /* EMACIO9 */
> +	3, /* EMACIO10 */
> +	3, /* EMACIO11 */
> +	3, /* EMACIO12 */
> +	3, /* EMACIO13 */
> +	0, /* EMACIO14 */
> +	0, /* EMACIO15 */
> +	0, /* EMACIO16 */
> +	0, /* EMACIO17 */
> +	0, /* EMACIO18 */
> +	0, /* EMACIO19 */
> +	0, /* FLASHIO0 */
> +	0, /* FLASHIO1 */
> +	0, /* FLASHIO2 */
> +	0, /* FLASHIO3 */
> +	0, /* FLASHIO4 */
> +	0, /* FLASHIO5 */
> +	0, /* FLASHIO6 */
> +	0, /* FLASHIO7 */
> +	0, /* FLASHIO8 */
> +	0, /* FLASHIO9 */
> +	0, /* FLASHIO10 */
> +	0, /* FLASHIO11 */
> +	3, /* GENERALIO0 */
> +	3, /* GENERALIO1 */
> +	3, /* GENERALIO2 */
> +	3, /* GENERALIO3 */
> +	3, /* GENERALIO4 */
> +	3, /* GENERALIO5 */
> +	3, /* GENERALIO6 */
> +	3, /* GENERALIO7 */
> +	3, /* GENERALIO8 */
> +	3, /* GENERALIO9 */
> +	3, /* GENERALIO10 */
> +	3, /* GENERALIO11 */
> +	3, /* GENERALIO12 */
> +	3, /* GENERALIO13 */
> +	3, /* GENERALIO14 */
> +	0, /* GENERALIO15 */
> +	0, /* GENERALIO16 */
> +	0, /* GENERALIO17 */
> +	0, /* GENERALIO18 */
> +	0, /* GENERALIO19 */
> +	0, /* GENERALIO20 */
> +	0, /* GENERALIO21 */
> +	0, /* GENERALIO22 */
> +	0, /* GENERALIO23 */
> +	0, /* GENERALIO24 */
> +	0, /* GENERALIO25 */
> +	0, /* GENERALIO26 */
> +	0, /* GENERALIO27 */
> +	0, /* GENERALIO28 */
> +	0, /* GENERALIO29 */
> +	0, /* GENERALIO30 */
> +	0, /* GENERALIO31 */
> +	3, /* MIXED1IO0 */
> +	3, /* MIXED1IO1 */
> +	3, /* MIXED1IO2 */
> +	3, /* MIXED1IO3 */
> +	3, /* MIXED1IO4 */
> +	3, /* MIXED1IO5 */
> +	3, /* MIXED1IO6 */
> +	3, /* MIXED1IO7 */
> +	3, /* MIXED1IO8 */
> +	3, /* MIXED1IO9 */
> +	3, /* MIXED1IO10 */
> +	3, /* MIXED1IO11 */
> +	3, /* MIXED1IO12 */
> +	3, /* MIXED1IO13 */
> +	3, /* MIXED1IO14 */
> +	0, /* MIXED1IO15 */
> +	0, /* MIXED1IO16 */
> +	0, /* MIXED1IO17 */
> +	0, /* MIXED1IO18 */
> +	0, /* MIXED1IO19 */
> +	0, /* MIXED1IO20 */
> +	0, /* MIXED1IO21 */
> +	0, /* MIXED2IO0 */
> +	0, /* MIXED2IO1 */
> +	0, /* MIXED2IO2 */
> +	0, /* MIXED2IO3 */
> +	0, /* MIXED2IO4 */
> +	0, /* MIXED2IO5 */
> +	0, /* MIXED2IO6 */
> +	0, /* MIXED2IO7 */
> +	0, /* GPLINMUX48 */
> +	0, /* GPLINMUX49 */
> +	0, /* GPLINMUX50 */
> +	0, /* GPLINMUX51 */
> +	0, /* GPLINMUX52 */
> +	0, /* GPLINMUX53 */
> +	0, /* GPLINMUX54 */
> +	0, /* GPLINMUX55 */
> +	0, /* GPLINMUX56 */
> +	0, /* GPLINMUX57 */
> +	0, /* GPLINMUX58 */
> +	0, /* GPLINMUX59 */
> +	0, /* GPLINMUX60 */
> +	0, /* GPLINMUX61 */
> +	0, /* GPLINMUX62 */
> +	0, /* GPLINMUX63 */
> +	0, /* GPLINMUX64 */
> +	0, /* GPLINMUX65 */
> +	0, /* GPLINMUX66 */
> +	0, /* GPLINMUX67 */
> +	0, /* GPLINMUX68 */
> +	0, /* GPLINMUX69 */
> +	0, /* GPLINMUX70 */
> +	1, /* GPLMUX0 */
> +	1, /* GPLMUX1 */
> +	1, /* GPLMUX2 */
> +	1, /* GPLMUX3 */
> +	1, /* GPLMUX4 */
> +	1, /* GPLMUX5 */
> +	1, /* GPLMUX6 */
> +	1, /* GPLMUX7 */
> +	1, /* GPLMUX8 */
> +	1, /* GPLMUX9 */
> +	1, /* GPLMUX10 */
> +	1, /* GPLMUX11 */
> +	1, /* GPLMUX12 */
> +	1, /* GPLMUX13 */
> +	1, /* GPLMUX14 */
> +	1, /* GPLMUX15 */
> +	1, /* GPLMUX16 */
> +	1, /* GPLMUX17 */
> +	1, /* GPLMUX18 */
> +	1, /* GPLMUX19 */
> +	1, /* GPLMUX20 */
> +	1, /* GPLMUX21 */
> +	1, /* GPLMUX22 */
> +	1, /* GPLMUX23 */
> +	1, /* GPLMUX24 */
> +	1, /* GPLMUX25 */
> +	1, /* GPLMUX26 */
> +	1, /* GPLMUX27 */
> +	1, /* GPLMUX28 */
> +	1, /* GPLMUX29 */
> +	1, /* GPLMUX30 */
> +	1, /* GPLMUX31 */
> +	1, /* GPLMUX32 */
> +	1, /* GPLMUX33 */
> +	1, /* GPLMUX34 */
> +	1, /* GPLMUX35 */
> +	1, /* GPLMUX36 */
> +	1, /* GPLMUX37 */
> +	1, /* GPLMUX38 */
> +	1, /* GPLMUX39 */
> +	1, /* GPLMUX40 */
> +	1, /* GPLMUX41 */
> +	1, /* GPLMUX42 */
> +	1, /* GPLMUX43 */
> +	1, /* GPLMUX44 */
> +	1, /* GPLMUX45 */
> +	1, /* GPLMUX46 */
> +	1, /* GPLMUX47 */
> +	1, /* GPLMUX48 */
> +	1, /* GPLMUX49 */
> +	1, /* GPLMUX50 */
> +	1, /* GPLMUX51 */
> +	1, /* GPLMUX52 */
> +	1, /* GPLMUX53 */
> +	1, /* GPLMUX54 */
> +	1, /* GPLMUX55 */
> +	1, /* GPLMUX56 */
> +	1, /* GPLMUX57 */
> +	1, /* GPLMUX58 */
> +	1, /* GPLMUX59 */
> +	1, /* GPLMUX60 */
> +	1, /* GPLMUX61 */
> +	1, /* GPLMUX62 */
> +	1, /* GPLMUX63 */
> +	1, /* GPLMUX64 */
> +	1, /* GPLMUX65 */
> +	1, /* GPLMUX66 */
> +	1, /* GPLMUX67 */
> +	1, /* GPLMUX68 */
> +	1, /* GPLMUX69 */
> +	1, /* GPLMUX70 */
> +	0, /* NANDUSEFPGA */
> +	0, /* UART0USEFPGA */
> +	0, /* RGMII1USEFPGA */
> +	0, /* SPIS0USEFPGA */
> +	0, /* CAN0USEFPGA */
> +	0, /* I2C0USEFPGA */
> +	0, /* SDMMCUSEFPGA */
> +	0, /* QSPIUSEFPGA */
> +	0, /* SPIS1USEFPGA */
> +	0, /* RGMII0USEFPGA */
> +	0, /* UART1USEFPGA */
> +	0, /* CAN1USEFPGA */
> +	0, /* USB1USEFPGA */
> +	0, /* I2C3USEFPGA */
> +	0, /* I2C2USEFPGA */
> +	0, /* I2C1USEFPGA */
> +	1, /* SPIM1USEFPGA */
> +	0, /* USB0USEFPGA */
> +	0 /* SPIM0USEFPGA */
> +};
> +#endif /* __SOCFPGA_PINMUX_CONFIG_H__ */
> diff --git a/board/keymile/secu1/qts/pll_config.h
> b/board/keymile/secu1/qts/pll_config.h
> new file mode 100644
> index 0000000000..f0c31860ca
> --- /dev/null
> +++ b/board/keymile/secu1/qts/pll_config.h
> @@ -0,0 +1,83 @@
> +/* SPDX-License-Identifier: BSD-3-Clause */
> +/*
> + * Altera SoCFPGA Clock and PLL configuration  */
> +
> +#ifndef __SOCFPGA_PLL_CONFIG_H__
> +#define __SOCFPGA_PLL_CONFIG_H__
> +
> +#define CONFIG_HPS_DBCTRL_STAYOSC1 1
> +
> +#define CONFIG_HPS_MAINPLLGRP_VCO_DENOM 0 #define
> +CONFIG_HPS_MAINPLLGRP_VCO_NUMER 39 #define
> +CONFIG_HPS_MAINPLLGRP_MPUCLK_CNT 0 #define
> +CONFIG_HPS_MAINPLLGRP_MAINCLK_CNT 0 #define
> +CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT 0 #define
> +CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT 511 #define
> +CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT 511 #define
> +CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT 15 #define
> +CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK 1 #define
> +CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK 1 #define
> +CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK 1 #define
> +CONFIG_HPS_MAINPLLGRP_MAINDIV_L4SPCLK 1 #define
> +CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGATCLK 0 #define
> +CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGCLK 1 #define
> +CONFIG_HPS_MAINPLLGRP_TRACEDIV_TRACECLK 0 #define
> +CONFIG_HPS_MAINPLLGRP_L4SRC_L4MP 1 #define
> +CONFIG_HPS_MAINPLLGRP_L4SRC_L4SP 1
> +
> +#define CONFIG_HPS_PERPLLGRP_VCO_DENOM 0 #define
> +CONFIG_HPS_PERPLLGRP_VCO_NUMER 24 #define
> CONFIG_HPS_PERPLLGRP_VCO_PSRC
> +0 #define CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT 3 #define
> +CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT 511 #define
> +CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT 511 #define
> +CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT 7 #define
> +CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT 4 #define
> +CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT 511 #define
> +CONFIG_HPS_PERPLLGRP_DIV_USBCLK 4 #define
> +CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK 0 #define
> +CONFIG_HPS_PERPLLGRP_DIV_CAN0CLK 4 #define
> +CONFIG_HPS_PERPLLGRP_DIV_CAN1CLK 4 #define
> +CONFIG_HPS_PERPLLGRP_GPIODIV_GPIODBCLK 6249 #define
> +CONFIG_HPS_PERPLLGRP_SRC_SDMMC 1 #define
> CONFIG_HPS_PERPLLGRP_SRC_NAND
> +2 #define CONFIG_HPS_PERPLLGRP_SRC_QSPI 1
> +
> +#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM 0 #define
> +CONFIG_HPS_SDRPLLGRP_VCO_NUMER 14 #define
> CONFIG_HPS_SDRPLLGRP_VCO_SSRC
> +0 #define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_CNT 1 #define
> +CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_PHASE 0 #define
> +CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_CNT 0 #define
> +CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_PHASE 0 #define
> +CONFIG_HPS_SDRPLLGRP_DDRDQCLK_CNT 1 #define
> +CONFIG_HPS_SDRPLLGRP_DDRDQCLK_PHASE 4 #define
> +CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_CNT 1 #define
> +CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_PHASE 0
> +
> +#define CONFIG_HPS_CLK_OSC1_HZ 40000000 #define
> CONFIG_HPS_CLK_OSC2_HZ
> +40000000 #define CONFIG_HPS_CLK_F2S_SDR_REF_HZ 0 #define
> +CONFIG_HPS_CLK_F2S_PER_REF_HZ 0 #define
> CONFIG_HPS_CLK_MAINVCO_HZ
> +1600000000 #define CONFIG_HPS_CLK_PERVCO_HZ 1000000000 #define
> +CONFIG_HPS_CLK_SDRVCO_HZ 600000000 #define
> CONFIG_HPS_CLK_EMAC0_HZ
> +250000000 #define CONFIG_HPS_CLK_EMAC1_HZ 1953125 #define
> +CONFIG_HPS_CLK_USBCLK_HZ 12500000 #define
> CONFIG_HPS_CLK_NAND_HZ
> +31250000 #define CONFIG_HPS_CLK_SDMMC_HZ 3125000 #define
> +CONFIG_HPS_CLK_QSPI_HZ 3125000 #define CONFIG_HPS_CLK_SPIM_HZ
> 200000000
> +#define CONFIG_HPS_CLK_CAN0_HZ 12500000 #define
> CONFIG_HPS_CLK_CAN1_HZ
> +12500000 #define CONFIG_HPS_CLK_GPIODB_HZ 32000 #define
> +CONFIG_HPS_CLK_L4_MP_HZ 100000000 #define
> CONFIG_HPS_CLK_L4_SP_HZ
> +100000000
> +
> +#define CONFIG_HPS_ALTERAGRP_MPUCLK 1
> +#define CONFIG_HPS_ALTERAGRP_MAINCLK 3
> +#define CONFIG_HPS_ALTERAGRP_DBGATCLK 3
> +
> +#endif /* __SOCFPGA_PLL_CONFIG_H__ */
> diff --git a/board/keymile/secu1/qts/sdram_config.h
> b/board/keymile/secu1/qts/sdram_config.h
> new file mode 100644
> index 0000000000..b0ff86ef38
> --- /dev/null
> +++ b/board/keymile/secu1/qts/sdram_config.h
> @@ -0,0 +1,327 @@
> +/* SPDX-License-Identifier: BSD-3-Clause */
> +/*
> + * Altera SoCFPGA SDRAM configuration
> + *
> + */
> +
> +#ifndef __SOCFPGA_SDRAM_CONFIG_H__
> +#define __SOCFPGA_SDRAM_CONFIG_H__
> +
> +/* SDRAM configuration */
> +#define CONFIG_HPS_SDR_CTRLCFG_CPORTRDWR_CPORTRDWR
> 	0x5A56A
> +#define CONFIG_HPS_SDR_CTRLCFG_CPORTRMAP_CPORTRMAP
> 	0xB00088
> +#define CONFIG_HPS_SDR_CTRLCFG_CPORTWIDTH_CPORTWIDTH
> 	0x44555
> +#define CONFIG_HPS_SDR_CTRLCFG_CPORTWMAP_CPORTWMAP
> 	0x2C011000
> +#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ADDRORDER		0
> +#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_DQSTRKEN
> 	0
> +#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN		0
> +#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN
> 	0
> +#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMBL
> 	8
> +#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMTYPE
> 	1
> +#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_NODMPINS
> 	0
> +#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_REORDEREN		1
> +#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_STARVELIMIT		10
> +#define CONFIG_HPS_SDR_CTRLCFG_CTRLWIDTH_CTRLWIDTH
> 	2
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS
> 	3
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_COLBITS		10
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS
> 	1
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS
> 	14
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMDEVWIDTH_DEVWIDTH
> 	8
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH
> 	32
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMINTR_INTREN
> 	0
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMODT_READ
> 	0
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMODT_WRITE
> 	1
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_AL
> 	0
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL
> 	5
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL
> 	4
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TFAW
> 	16
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRFC
> 	60
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD
> 	4
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRCD
> 	5
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TREFI
> 	2341
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRP		5
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWR
> 	5
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWTR
> 	2
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TCCD
> 	4
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TMRD
> 	2
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRAS
> 	13
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRC
> 	17
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP
> 	3
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_PWRDOWNEXIT
> 		3
> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_SELFRFSHEXIT
> 	200
> +#define
> CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_W
> R 3
> +#define
> CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_W
> R_BC
> +3 #define
> CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_W
> R_DIFF_CHIP 3
> +#define CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_INCSYNC
> 	0
> +#define CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_SYNCMODE
> 	0
> +#define CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST			0x0
> +#define CONFIG_HPS_SDR_CTRLCFG_LOWPWREQ_SELFRFSHMASK
> 	3
> +#define CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_AUTOPDCYCLES
> 	0
> +#define
> CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_CLKDISABLECYCLES	8
> +#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_0_THRESHOLD1_31_0
> 	0x20820820
> +#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_1_THRESHOLD1_59_32
> 	0x8208208
> +#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_1_THRESHOLD2_3_0
> 	0
> +#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_2_THRESHOLD2_35_4
> 	0x41041041
> +#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_3_THRESHOLD2_59_36
> 	0x410410
> +#define CONFIG_HPS_SDR_CTRLCFG_MPPRIORITY_USERPRIORITY
> 	0x0
> +#define
> CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_0_THRESHOLDRSTCYCLES_
> 31_0
> +0x01010101 #define
> +CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_1_THRESHOLDRSTCYCLES
> _63_32 0x01010101 #define
> CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_2_THRESHOLDRSTCYCLES_
> 79_64 0x0101
> +#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_0_STATICWEIGHT_31_0
> 	0x21084210
> +#define
> CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_1_STATICWEIGHT_49_32
> 	0x10441
> +#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_1_SUMOFWEIGHT_13_0
> 	0x78
> +#define
> CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_2_SUMOFWEIGHT_45_14	0x0
> +#define
> CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_3_SUMOFWEIGHT_63_46	0x0
> +#define CONFIG_HPS_SDR_CTRLCFG_PHYCTRL_PHYCTRL_0
> 	0x200
> +#define CONFIG_HPS_SDR_CTRLCFG_PORTCFG_AUTOPCHEN		0
> +#define CONFIG_HPS_SDR_CTRLCFG_RFIFOCMAP_RFIFOCMAP
> 	0x760210
> +#define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_MEMBL
> 	2
> +#define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_USEECCASDATA
> 	0
> +#define CONFIG_HPS_SDR_CTRLCFG_WFIFOCMAP_WFIFOCMAP
> 	0x980543
> +
> +/* Sequencer auto configuration */
> +#define RW_MGR_ACTIVATE_0_AND_1	0x11
> +#define RW_MGR_ACTIVATE_0_AND_1_WAIT1	0x12
> +#define RW_MGR_ACTIVATE_0_AND_1_WAIT2	0x14
> +#define RW_MGR_CLEAR_DQS_ENABLE	0x4B
> +#define RW_MGR_EMR	0x09
> +#define RW_MGR_EMR2	0x0D
> +#define RW_MGR_EMR3	0x0F
> +#define RW_MGR_EMR_OCD_ENABLE	0x0B
> +#define RW_MGR_GUARANTEED_READ	0x4E
> +#define RW_MGR_GUARANTEED_READ_CONT	0x56
> +#define RW_MGR_GUARANTEED_WRITE	0x1A
> +#define RW_MGR_GUARANTEED_WRITE_WAIT0	0x1D
> +#define RW_MGR_GUARANTEED_WRITE_WAIT1	0x21
> +#define RW_MGR_GUARANTEED_WRITE_WAIT2	0x1B
> +#define RW_MGR_GUARANTEED_WRITE_WAIT3	0x1F
> +#define RW_MGR_IDLE	0x00
> +#define RW_MGR_IDLE_LOOP1	0x77
> +#define RW_MGR_IDLE_LOOP2	0x76
> +#define RW_MGR_INIT_CKE_0	0x71
> +#define RW_MGR_LFSR_WR_RD_BANK_0	0x24
> +#define RW_MGR_LFSR_WR_RD_BANK_0_DATA	0x27
> +#define RW_MGR_LFSR_WR_RD_BANK_0_DQS	0x26
> +#define RW_MGR_LFSR_WR_RD_BANK_0_NOP	0x25
> +#define RW_MGR_LFSR_WR_RD_BANK_0_WAIT	0x34
> +#define RW_MGR_LFSR_WR_RD_BANK_0_WL_1	0x23
> +#define RW_MGR_LFSR_WR_RD_DM_BANK_0	0x38
> +#define RW_MGR_LFSR_WR_RD_DM_BANK_0_DATA	0x3B
> +#define RW_MGR_LFSR_WR_RD_DM_BANK_0_DQS	0x3A
> +#define RW_MGR_LFSR_WR_RD_DM_BANK_0_NOP	0x39
> +#define RW_MGR_LFSR_WR_RD_DM_BANK_0_WAIT	0x48
> +#define RW_MGR_LFSR_WR_RD_DM_BANK_0_WL_1	0x37
> +#define RW_MGR_MR_CALIB	0x05
> +#define RW_MGR_MR_DLL_RESET	0x07
> +#define RW_MGR_MR_USER	0x03
> +#define RW_MGR_NOP	0x01
> +#define RW_MGR_PRECHARGE_ALL	0x16
> +#define RW_MGR_READ_B2B	0x5B
> +#define RW_MGR_READ_B2B_WAIT1	0x63
> +#define RW_MGR_READ_B2B_WAIT2	0x6D
> +#define RW_MGR_REFRESH	0x18
> +
> +/* Sequencer defines configuration */
> +#define AFI_CLK_FREQ	301
> +#define AFI_RATE_RATIO	1
> +#define CALIB_LFIFO_OFFSET	6
> +#define CALIB_VFIFO_OFFSET	4
> +#define ENABLE_SUPER_QUICK_CALIBRATION	0
> +#define IO_DELAY_PER_DCHAIN_TAP	25
> +#define IO_DELAY_PER_DQS_EN_DCHAIN_TAP	25
> +#define IO_DELAY_PER_OPA_TAP	416
> +#define IO_DLL_CHAIN_LENGTH	8
> +#define IO_DQDQS_OUT_PHASE_MAX	0
> +#define IO_DQS_EN_DELAY_MAX	31
> +#define IO_DQS_EN_DELAY_OFFSET	0
> +#define IO_DQS_EN_PHASE_MAX	7
> +#define IO_DQS_IN_DELAY_MAX	31
> +#define IO_DQS_IN_RESERVE	4
> +#define IO_DQS_OUT_RESERVE	4
> +#define IO_IO_IN_DELAY_MAX	31
> +#define IO_IO_OUT1_DELAY_MAX	31
> +#define IO_IO_OUT2_DELAY_MAX	0
> +#define IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS	0
> +#define MAX_LATENCY_COUNT_WIDTH	5
> +#define READ_VALID_FIFO_SIZE	16
> +#define REG_FILE_INIT_SEQ_SIGNATURE	0x555504bf
> +#define RW_MGR_MEM_ADDRESS_MIRRORING	0
> +#define RW_MGR_MEM_DATA_MASK_WIDTH	4
> +#define RW_MGR_MEM_DATA_WIDTH	32
> +#define RW_MGR_MEM_DQ_PER_READ_DQS	8
> +#define RW_MGR_MEM_DQ_PER_WRITE_DQS	8
> +#define RW_MGR_MEM_IF_READ_DQS_WIDTH	4
> +#define RW_MGR_MEM_IF_WRITE_DQS_WIDTH	4
> +#define RW_MGR_MEM_NUMBER_OF_CS_PER_DIMM	1
> +#define RW_MGR_MEM_NUMBER_OF_RANKS	1
> +#define RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS	1
> +#define RW_MGR_MEM_VIRTUAL_GROUPS_PER_WRITE_DQS	1
> +#define RW_MGR_TRUE_MEM_DATA_MASK_WIDTH	4
> +#define TINIT_CNTR0_VAL	74
> +#define TINIT_CNTR1_VAL	20
> +#define TINIT_CNTR2_VAL	20
> +#define TRESET_CNTR0_VAL	74
> +#define TRESET_CNTR1_VAL	99
> +#define TRESET_CNTR2_VAL	10
> +
> +/* Sequencer ac_rom_init configuration */ const u32 ac_rom_init[] = {
> +	0x30700000,
> +	0x38700000,
> +	0x30700000,
> +	0x20700000,
> +	0x10000853,
> +	0x10000853,
> +	0x10000953,
> +	0x10010000,
> +	0x10010380,
> +	0x10020000,
> +	0x10030000,
> +	0x10300400,
> +	0x10600000,
> +	0x10620000,
> +	0x10200400,
> +	0x10400000,
> +	0x1c900000,
> +	0x1c920000,
> +	0x1c900008,
> +	0x1c920008,
> +	0x38f00000,
> +	0x3cf00000,
> +	0x38700000,
> +	0x10100000,
> +	0x18900000,
> +	0x13500000,
> +	0x13520000,
> +	0x13500008,
> +	0x13520008,
> +	0x33700000,
> +	0x10500008
> +};
> +
> +/* Sequencer inst_rom_init configuration */ const u32 inst_rom_init[] =
> +{
> +	0x80180,
> +	0x100,
> +	0x80000,
> +	0x200,
> +	0x80000,
> +	0x280,
> +	0x80000,
> +	0x300,
> +	0x80000,
> +	0x380,
> +	0x80000,
> +	0x400,
> +	0x80000,
> +	0x480,
> +	0x80000,
> +	0x500,
> +	0x80000,
> +	0x600,
> +	0x8000,
> +	0x680,
> +	0xa000,
> +	0x80000,
> +	0x700,
> +	0x80000,
> +	0x780,
> +	0x80000,
> +	0x968,
> +	0xcae8,
> +	0x8e8,
> +	0x8ae8,
> +	0x988,
> +	0xea88,
> +	0x808,
> +	0xaa88,
> +	0x80000,
> +	0xcc00,
> +	0xcb80,
> +	0xe080,
> +	0xa00,
> +	0x20ae0,
> +	0x20ae0,
> +	0x20ae0,
> +	0x20ae0,
> +	0xb00,
> +	0x0,
> +	0x0,
> +	0x0,
> +	0x0,
> +	0x60c80,
> +	0x60e80,
> +	0x60e80,
> +	0x60e80,
> +	0xa000,
> +	0x8000,
> +	0x80000,
> +	0xcc00,
> +	0xcb80,
> +	0xe080,
> +	0xa00,
> +	0x30ae0,
> +	0x30ae0,
> +	0x30ae0,
> +	0x30ae0,
> +	0xb00,
> +	0x0,
> +	0x0,
> +	0x0,
> +	0x0,
> +	0x70c80,
> +	0x70e80,
> +	0x70e80,
> +	0x70e80,
> +	0xa000,
> +	0x8000,
> +	0x80000,
> +	0xf58,
> +	0x58,
> +	0x80000,
> +	0xf68,
> +	0x168,
> +	0x168,
> +	0x8168,
> +	0x40de8,
> +	0x40ee8,
> +	0x40ee8,
> +	0x40ee8,
> +	0xf68,
> +	0x168,
> +	0x168,
> +	0xa168,
> +	0x80000,
> +	0x40c88,
> +	0x40e88,
> +	0x40e88,
> +	0x40e88,
> +	0x40d68,
> +	0x40ee8,
> +	0x40ee8,
> +	0x40ee8,
> +	0xa000,
> +	0x40de8,
> +	0x40ee8,
> +	0x40ee8,
> +	0x40ee8,
> +	0x40e08,
> +	0x40e88,
> +	0x40e88,
> +	0x40e88,
> +	0xf00,
> +	0xc000,
> +	0x8000,
> +	0xe000,
> +	0x80000,
> +	0x180,
> +	0x8180,
> +	0xa180,
> +	0xc180,
> +	0x80180,
> +	0x8000,
> +	0xa000,
> +	0x80000
> +};
> +
> +#endif /* __SOCFPGA_SDRAM_CONFIG_H__ */
> diff --git a/board/keymile/secu1/socfpga.c
> b/board/keymile/secu1/socfpga.c new file mode 100644 index
> 0000000000..dc04a21abe
> --- /dev/null
> +++ b/board/keymile/secu1/socfpga.c
> @@ -0,0 +1,67 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2017-2020 ABB
> + */
> +#include <common.h>
> +#include <i2c.h>
> +#include <asm/gpio.h>
> +
> +#include "../common/common.h"
> +
> +/*
> + * For FU1, the MAC address associated with the mgmt port should
> + * be the base address (as read from the IVM) + 4, and for FU2 it
> + * is + 10
> + */
> +#define MAC_ADDRESS_OFFSET_FU1	4
> +#define MAC_ADDRESS_OFFSET_FU2	10
> +
> +/*
> + * This function reads the state of GPIO40 and returns true (non-zero)
> + * if it is '1' and false(0) otherwise.
> + *
> + * This pin is routed to a pull-up on FU2 and a pull-down on  */
> +#define GPIO_FU_DETECTION	40
> +
> +int secu1_is_fu2(void)
> +{
> +	int value;
> +	int ret = gpio_request(GPIO_FU_DETECTION, "secu");
> +
> +	if (ret) {
> +		printf("gpio: failed to request pin for FU  detection\n");
> +		return 1;
> +	}
> +	gpio_direction_input(GPIO_FU_DETECTION);
> +	value = gpio_get_value(GPIO_FU_DETECTION);
Can reuse "ret" for return value, save one int.
> +
> +	if (value == 1)
> +		printf("FU2 detected\n");
> +	else
> +		printf("FU1 detected\n");
> +
> +	return value;
> +}
> +
> +static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
> +
> +#if defined(CONFIG_HUSH_INIT_VAR)
> +int hush_init_var(void)
> +{
> +	ivm_analyze_eeprom(ivm_content,
> CONFIG_SYS_IVM_EEPROM_MAX_LEN);
> +	return 0;
> +}
> +#endif
> +
> +int misc_init_r(void)
> +{
> +	if (secu1_is_fu2())
> +		ivm_read_eeprom(ivm_content,
> CONFIG_SYS_IVM_EEPROM_MAX_LEN,
> +				MAC_ADDRESS_OFFSET_FU2);
> +	else
> +		ivm_read_eeprom(ivm_content,
> CONFIG_SYS_IVM_EEPROM_MAX_LEN,
> +				MAC_ADDRESS_OFFSET_FU1);
> +
> +	return 0;
> +}
> diff --git a/configs/socfpga_secu1_defconfig
> b/configs/socfpga_secu1_defconfig new file mode 100644 index
> 0000000000..d81c6fdfb3
> --- /dev/null
> +++ b/configs/socfpga_secu1_defconfig
> @@ -0,0 +1,83 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SOCFPGA=y
> +CONFIG_SYS_MALLOC_F_LEN=0x800
> +CONFIG_ENV_SIZE=0x1000
> +CONFIG_ENV_OFFSET=0x100000
> +CONFIG_DM_GPIO=y
> +# CONFIG_SPL_MMC_SUPPORT is not set
> +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
> +CONFIG_TARGET_SOCFPGA_ARRIA5_SECU1=y
> +CONFIG_ENV_OFFSET_REDUND=0x120000
> +# CONFIG_SPL_LIBDISK_SUPPORT is not set # CONFIG_SPL_SPI_SUPPORT is
> not
> +set
> +CONFIG_SPL_TEXT_BASE=0xFFFF0000
> +CONFIG_DISTRO_DEFAULTS=y
> +CONFIG_BUILD_TARGET="u-boot-with-nand-spl.sfp"
> +CONFIG_FIT=y
> +# CONFIG_USE_BOOTCOMMAND is not set
> +CONFIG_SYS_CONSOLE_IS_IN_ENV=y
> +CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
> +CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
> +CONFIG_DEFAULT_FDT_FILE="socfpga_arria5_secu1.dtb"
> +CONFIG_VERSION_VARIABLE=y
> +# CONFIG_DISPLAY_BOARDINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y
> +# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set #
> +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION is not set
> +CONFIG_SPL_MTD_SUPPORT=y CONFIG_CMD_ASKENV=y
> CONFIG_CMD_GREPENV=y
> +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set
> CONFIG_CMD_GPIO=y
> +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y
> CONFIG_CMD_NAND_TRIMFFS=y
> +CONFIG_CMD_SPI=y CONFIG_CMD_WDT=y CONFIG_CMD_CACHE=y
> +CONFIG_MTDIDS_DEFAULT="nand0=denali-nand"
> +CONFIG_MTDPARTS_DEFAULT="mtdparts=denali-
> nand:512k(nand.4spl),512k(nand.uboot),128k(nand.env1),128k(nand.env2),0
> x1000000(nand.rec),0x3ee40000(nand.ubi),0x80000 at 0x3ff80000(nand.bbt)"
> +CONFIG_CMD_UBI=y
> +# CONFIG_CMD_UBIFS is not set
> +# CONFIG_ISO_PARTITION is not set
> +# CONFIG_EFI_PARTITION is not set
> +CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria5_secu1"
> +CONFIG_ENV_IS_IN_NAND=y
> +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
> +CONFIG_SPL_DM_SEQ_ALIAS=y
> +# CONFIG_SPL_BLK is not set
> +CONFIG_DWAPB_GPIO=y
> +CONFIG_DM_I2C=y
> +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
> +CONFIG_DM_I2C_GPIO=y
> +CONFIG_MISC=y
> +CONFIG_I2C_EEPROM=y
> +CONFIG_SYS_I2C_EEPROM_ADDR=0x50
> +CONFIG_SYS_EEPROM_SIZE=1024
> +CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
> +CONFIG_DM_MMC=y
> +CONFIG_MMC_DW=y
> +CONFIG_MTD=y
> +CONFIG_DM_MTD=y
> +CONFIG_MTD_RAW_NAND=y
> +CONFIG_NAND_DENALI_DT=y
> +CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=2
> +CONFIG_SPL_NAND_DENALI=y
> +# CONFIG_DM_SPI_FLASH is not set
> +CONFIG_MTD_UBI_FASTMAP=y
> +CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1
> +CONFIG_MV88E6352_SWITCH=y
> +CONFIG_PHY_FIXED=y
> +CONFIG_DM_ETH=y
> +CONFIG_PHY_GIGE=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_MII=y
> +CONFIG_DM_RESET=y
> +CONFIG_SPI=y
> +CONFIG_SPI_MEM=y
> +CONFIG_DESIGNWARE_SPI=y
> +CONFIG_DESIGNWARE_WATCHDOG=y
> +CONFIG_WDT=y
> +# CONFIG_GZIP is not set
> diff --git a/include/configs/socfpga_arria5_secu1.h
> b/include/configs/socfpga_arria5_secu1.h
> new file mode 100644
> index 0000000000..b059100ccd
> --- /dev/null
> +++ b/include/configs/socfpga_arria5_secu1.h
> @@ -0,0 +1,131 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright (C) 2017-2020 ABB
> + *
> + */
> +#ifndef __CONFIG_SOCFPGA_SECU1_H__
> +#define __CONFIG_SOCFPGA_SECU1_H__
> +
> +#include <asm/arch/base_addr_ac5.h>
> +
> +/* Call misc_init_r */
> +#define CONFIG_MISC_INIT_R
> +
> +#define CONFIG_HUSH_INIT_VAR
> +/* Eternal oscillator */
> +#define CONFIG_SYS_TIMER_RATE	40000000
> +
> +/* Memory configurations */
> +#define PHYS_SDRAM_1_SIZE	0x20000000	/* 512MiB on SECU1 */
> +
> +/*
> + * We use bootcounter in i2c nvram of the RTC (0x68)
> + * The offset fopr the bootcounter is 0x9e, which are
> + * the last two bytes of the 128 bytes large NVRAM in the
> + * RTC which begin at address 0x20
> + */
> +#define CONFIG_SYS_I2C_RTC_ADDR         0x68
> +
> +/* Booting Linux */
> +#define CONFIG_BOOTDELAY	2
> +#define CONFIG_BOOTFILE		"zImage"
> +#define CONFIG_BOOTARGS		\
> +	"console=ttyS0," __stringify(CONFIG_BAUDRATE) \
> +	" ubi.fm_autoconvert=1" \
> +	" uio_pdrv_genirq.of_id=\"idq,regbank\""
> +
> +#define CONFIG_BOOTCOMMAND	\
> +	"setenv bootcmd '"	\
> +		"bridge enable; "	\
> +		"if test ${bootnum} = \"b\"; " \
> +		      "then run _fpga_loadsafe; " \
> +		"else if test ${bootcount} -eq 4; then echo \"Switching
> copy...\"; setexpr x $bootnum % 2 && setexpr bootnum $x + 1; saveenv; fi; "
> \
> +		      "run _fpga_loaduser; " \
> +		"fi;" \
> +		"echo \"Booting bank $bootnum\" && run userload && run
> userboot;" \
> +	"' && " \
> +	"setenv altbootcmd 'setenv bootnum b && saveenv && boot;' && " \
> +	"saveenv && saveenv && boot;"
> +
> +#define CONFIG_CMDLINE_TAG
> +#define CONFIG_SYS_BOOTM_LEN		(64 << 20)
> +
> +/* Environment settings */
> +#define CONFIG_ENV_OVERWRITE
> +
> +/*
> + * Autoboot
> + *
> + * After 45s of inactivity in the prompt, the board will reset.
> + * Set 'bootretry' in the environment to -1 to disable this behavior
> +*/ #define CONFIG_BOOT_RETRY_TIME 45 #define
> CONFIG_RESET_TO_RETRY
> +
> +#define CONFIG_LOADADDR		0x01000000
> +#define CONFIG_SYS_LOAD_ADDR   CONFIG_KM_KERNEL_ADDR
> +
> +/*
> + * FPGA Remote Update related environment
> + *
> + * Note that since those commands access the FPGA, the HPS-to-FPGA
> + * bridges MUST have been previously enabled (for example
> + * with 'bridge enable').
> + */
> +#define FPGA_RMTU_ENV \
> +	"rmtu_page=0xFF29000C\0" \
> +	"rmtu_reconfig=0xFF290018\0" \
> +	"fpga_safebase=0x0\0" \
> +	"fpga_userbase=0x2000000\0" \
> +	"_fpga_loaduser=echo Loading FPGA USER image..." \
> +		" && mw ${rmtu_page} ${fpga_userbase} && mw
> ${rmtu_reconfig} 1\0" \
> +	"_fpga_loadsafe=echo Loading FPGA SAFE image..." \
> +		" && mw ${rmtu_page} ${fpga_safebase} && mw
> ${rmtu_reconfig} 1\0" \
> +
> +#define CONFIG_KM_NEW_ENV \
> +	"newenv=" \
> +		"nand erase 0x100000 0x40000\0"
> +
> +#define CONFIG_KM_DEF_ENV_BOOTTARGETS \
> +	"release=" \
> +		"run newenv; reset\0" \
> +	"develop=" \
> +		"tftp 0x200000 scripts/develop-secu.txt && env import -t
> 0x200000 ${filesize} && saveenv && reset\0"
> +
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> +	FPGA_RMTU_ENV \
> +	CONFIG_KM_DEF_ENV_BOOTTARGETS \
> +	CONFIG_KM_NEW_ENV \
> +	"socfpga_legacy_reset_compat=1\0"	\
> +	"altbootcmd=run bootcmd;\0"	\
> +	"bootlimit=6\0"	\
> +	"bootnum=1\0" \
> +	"bootretry=" __stringify(CONFIG_BOOT_RETRY_TIME) "\0" \
> +	"fdt_addr=" __stringify(CONFIG_KM_FDT_ADDR) "\0" \
> +	"load=tftpboot ${loadaddr} u-boot-with-nand-spl.sfp\0" \
> +	"loadaddr=" __stringify(CONFIG_KM_KERNEL_ADDR) "\0" \
> +	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
> +	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
> +	"update=nand erase 0x0 0x00100000 && nand write ${loadaddr} 0x0
> ${filesize}\0" \
> +	"userload=ubi part nand.ubi &&" \
> +		"ubi check rootfs$bootnum &&" \
> +		"ubi read $fdt_addr dtb$bootnum &&" \
> +		"ubi read $loadaddr kernel$bootnum\0" \
> +	"userboot=setenv bootargs " CONFIG_BOOTARGS \
> +		" ubi.mtd=1 ubi.block=0,rootfs$bootnum
> root=/dev/ubiblock0_$ubivolid"	\
> +		" ro rootfstype=squashfs init=sbin/preinit;" \
> +		"bootz ${loadaddr} - ${fdt_addr}\0" \
> +	"verify=y\0"
> +
> +/* The rest of the configuration is shared */ #include
> +<configs/socfpga_common.h>
> +
> +#ifdef CONFIG_SPL_NAND_SUPPORT
> +#undef CONFIG_SYS_NAND_U_BOOT_OFFS
> +#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
> +#endif
> +
> +#undef CONFIG_WATCHDOG_TIMEOUT_MSECS
> +#define CONFIG_WATCHDOG_TIMEOUT_MSECS	60000
> +
> +#endif	/* __CONFIG_SOCFPGA_SECU1_H__ */
> --
> 2.24.1
>
Holger Brunck Feb. 18, 2020, 7:47 a.m. UTC | #4
Hi Marek and Wolfgang,

> > In message <20200217173249.4805-1-marex at denx.de> you wrote:
> >>
> >>  board/keymile/Kconfig                   |  11 +-
> >>  board/keymile/common/ivm.c              |  18 +-
> >>  board/keymile/secu1/Makefile            |   7 +
> >>  board/keymile/secu1/qts/iocsr_config.h  | 694
> >> ++++++++++++++++++++++++  board/keymile/secu1/qts/pinmux_config.h
> | 218 ++++++++
> >>  board/keymile/secu1/qts/pll_config.h    |  83 +++
> >>  board/keymile/secu1/qts/sdram_config.h  | 327 +++++++++++
> >>  board/keymile/secu1/socfpga.c           |  67 +++
> > ...
> >> +    select VENDOR_KM
> >
> > Would it make sense to rename keymile -> abb (or abb-ch) here (ditto
> > for KM in the config options / macro names) ?
> 
> This is more of a question for Holger, but I agree the renaming should
> eventually happen to align it with current state of things.

yes I have it on my list to rename this folder to wcom (wiredcom)  or wcom-abb.
But this goes for all the boards in this folder and not only secu. But until know
I didn't find the right time to do it as we have currently several activities ongoing for
u-boot (re-aligning other boards and migrating PPC to DTS).

I assume SECU goes for v2020.07 as we are too late for v2020.04 or?  I think I can
spend some time for the next merge window to tackle this folder issue for all boards
and then we rebase and adapt this  patch.
 
Best regards
Holger
Marek Vasut Feb. 18, 2020, 5:33 p.m. UTC | #5
On 2/18/20 1:54 AM, Tan, Ley Foon wrote:
[...]

>> diff --git a/board/keymile/common/ivm.c b/board/keymile/common/ivm.c
>> index fee7f03c8c..80dae73bb6 100644
>> --- a/board/keymile/common/ivm.c
>> +++ b/board/keymile/common/ivm.c
>> @@ -328,7 +328,23 @@ static int ivm_populate_env(unsigned char *buf, int
>> len, int mac_address_offset)  int ivm_read_eeprom(unsigned char *buf, int
>> len, int mac_address_offset)  {
>>  	int ret;
>> +#ifdef CONFIG_DM_I2C
>> +	struct udevice *eedev = NULL;
>> +
>> +	ret = i2c_get_chip_for_busnum(CONFIG_KM_IVM_BUS,
>> +				      CONFIG_SYS_I2C_EEPROM_ADDR, 1,
>> &eedev);
>> +	if (ret) {
>> +		printf("failed to get device for EEPROM at address 0x50\n");
> 	Should change 0x50 to value of CONFIG_SYS_I2C_EEPROM_ADDR.

OK

btw please trim the emails, I really had trouble finding this one line
in the sea of quoted text.

>> +		return 1;
>> +	}
>>
>> +	ret = dm_i2c_read(eedev, 0, buf, len);
>> +	if (ret != 0) {
>> +		printf("Error: Unable to read from I2C EEPROM at
>> address %02X:%02X\n",
>> +		       CONFIG_SYS_I2C_EEPROM_ADDR, 0);
>> +		return 1;
>> +	}
>> +#else

[...]
Marek Vasut Feb. 18, 2020, 5:34 p.m. UTC | #6
On 2/18/20 8:47 AM, Holger Brunck wrote:
> Hi Marek and Wolfgang,
> 
>>> In message <20200217173249.4805-1-marex at denx.de> you wrote:
>>>>
>>>>  board/keymile/Kconfig                   |  11 +-
>>>>  board/keymile/common/ivm.c              |  18 +-
>>>>  board/keymile/secu1/Makefile            |   7 +
>>>>  board/keymile/secu1/qts/iocsr_config.h  | 694
>>>> ++++++++++++++++++++++++  board/keymile/secu1/qts/pinmux_config.h
>> | 218 ++++++++
>>>>  board/keymile/secu1/qts/pll_config.h    |  83 +++
>>>>  board/keymile/secu1/qts/sdram_config.h  | 327 +++++++++++
>>>>  board/keymile/secu1/socfpga.c           |  67 +++
>>> ...
>>>> +    select VENDOR_KM
>>>
>>> Would it make sense to rename keymile -> abb (or abb-ch) here (ditto
>>> for KM in the config options / macro names) ?
>>
>> This is more of a question for Holger, but I agree the renaming should
>> eventually happen to align it with current state of things.
> 
> yes I have it on my list to rename this folder to wcom (wiredcom)  or wcom-abb.
> But this goes for all the boards in this folder and not only secu. But until know
> I didn't find the right time to do it as we have currently several activities ongoing for
> u-boot (re-aligning other boards and migrating PPC to DTS).
> 
> I assume SECU goes for v2020.07 as we are too late for v2020.04 or?  I think I can
> spend some time for the next merge window to tackle this folder issue for all boards
> and then we rebase and adapt this  patch.

Boards and drivers which are self-contained can apparently go in even
during RC cycle.
Holger Brunck Feb. 19, 2020, 12:45 p.m. UTC | #7
> >>> In message <20200217173249.4805-1-marex at denx.de> you wrote:
> >>>>
> >>>>  board/keymile/Kconfig                   |  11 +-
> >>>>  board/keymile/common/ivm.c              |  18 +-
> >>>>  board/keymile/secu1/Makefile            |   7 +
> >>>>  board/keymile/secu1/qts/iocsr_config.h  | 694
> >>>> ++++++++++++++++++++++++
> board/keymile/secu1/qts/pinmux_config.h
> >> | 218 ++++++++
> >>>>  board/keymile/secu1/qts/pll_config.h    |  83 +++
> >>>>  board/keymile/secu1/qts/sdram_config.h  | 327 +++++++++++
> >>>>  board/keymile/secu1/socfpga.c           |  67 +++
> >>> ...
> >>>> +    select VENDOR_KM
> >>>
> >>> Would it make sense to rename keymile -> abb (or abb-ch) here (ditto
> >>> for KM in the config options / macro names) ?
> >>
> >> This is more of a question for Holger, but I agree the renaming
> >> should eventually happen to align it with current state of things.
> >
> > yes I have it on my list to rename this folder to wcom (wiredcom)  or wcom-
> abb.
> > But this goes for all the boards in this folder and not only secu. But
> > until know I didn't find the right time to do it as we have currently
> > several activities ongoing for u-boot (re-aligning other boards and migrating
> PPC to DTS).
> >
> > I assume SECU goes for v2020.07 as we are too late for v2020.04 or?  I
> > think I can spend some time for the next merge window to tackle this
> > folder issue for all boards and then we rebase and adapt this  patch.
> 
> Boards and drivers which are self-contained can apparently go in even during
> RC cycle.

ok. I prepared a patch to tackle the renaming topic and will upload it. Let's see what
gets in first. We can then rebase this patch if necessary.

Best regards
Holger
Marek Vasut Feb. 19, 2020, 2:55 p.m. UTC | #8
On 2/19/20 1:45 PM, Holger Brunck wrote:
>>>>> In message <20200217173249.4805-1-marex at denx.de> you wrote:
>>>>>>
>>>>>>  board/keymile/Kconfig                   |  11 +-
>>>>>>  board/keymile/common/ivm.c              |  18 +-
>>>>>>  board/keymile/secu1/Makefile            |   7 +
>>>>>>  board/keymile/secu1/qts/iocsr_config.h  | 694
>>>>>> ++++++++++++++++++++++++
>> board/keymile/secu1/qts/pinmux_config.h
>>>> | 218 ++++++++
>>>>>>  board/keymile/secu1/qts/pll_config.h    |  83 +++
>>>>>>  board/keymile/secu1/qts/sdram_config.h  | 327 +++++++++++
>>>>>>  board/keymile/secu1/socfpga.c           |  67 +++
>>>>> ...
>>>>>> +    select VENDOR_KM
>>>>>
>>>>> Would it make sense to rename keymile -> abb (or abb-ch) here (ditto
>>>>> for KM in the config options / macro names) ?
>>>>
>>>> This is more of a question for Holger, but I agree the renaming
>>>> should eventually happen to align it with current state of things.
>>>
>>> yes I have it on my list to rename this folder to wcom (wiredcom)  or wcom-
>> abb.
>>> But this goes for all the boards in this folder and not only secu. But
>>> until know I didn't find the right time to do it as we have currently
>>> several activities ongoing for u-boot (re-aligning other boards and migrating
>> PPC to DTS).
>>>
>>> I assume SECU goes for v2020.07 as we are too late for v2020.04 or?  I
>>> think I can spend some time for the next merge window to tackle this
>>> folder issue for all boards and then we rebase and adapt this  patch.
>>
>> Boards and drivers which are self-contained can apparently go in even during
>> RC cycle.
> 
> ok. I prepared a patch to tackle the renaming topic and will upload it. Let's see what
> gets in first. We can then rebase this patch if necessary.

Indeed, your patch now conflicts with Heiko's patch and this patch.
This will be quite a headache to merge, so I would suggest you update
your patch once the other ones are in, since yours is just moving files
around.
Holger Brunck Feb. 19, 2020, 3:09 p.m. UTC | #9
> On 2/19/20 1:45 PM, Holger Brunck wrote:
> >>>>> In message <20200217173249.4805-1-marex at denx.de> you wrote:
> >>>>>>
> >>>>>>  board/keymile/Kconfig                   |  11 +-
> >>>>>>  board/keymile/common/ivm.c              |  18 +-
> >>>>>>  board/keymile/secu1/Makefile            |   7 +
> >>>>>>  board/keymile/secu1/qts/iocsr_config.h  | 694
> >>>>>> ++++++++++++++++++++++++
> >> board/keymile/secu1/qts/pinmux_config.h
> >>>> | 218 ++++++++
> >>>>>>  board/keymile/secu1/qts/pll_config.h    |  83 +++
> >>>>>>  board/keymile/secu1/qts/sdram_config.h  | 327 +++++++++++
> >>>>>>  board/keymile/secu1/socfpga.c           |  67 +++
> >>>>> ...
> >>>>>> +    select VENDOR_KM
> >>>>>
> >>>>> Would it make sense to rename keymile -> abb (or abb-ch) here
> >>>>> (ditto for KM in the config options / macro names) ?
> >>>>
> >>>> This is more of a question for Holger, but I agree the renaming
> >>>> should eventually happen to align it with current state of things.
> >>>
> >>> yes I have it on my list to rename this folder to wcom (wiredcom)
> >>> or wcom-
> >> abb.
> >>> But this goes for all the boards in this folder and not only secu.
> >>> But until know I didn't find the right time to do it as we have
> >>> currently several activities ongoing for u-boot (re-aligning other
> >>> boards and migrating
> >> PPC to DTS).
> >>>
> >>> I assume SECU goes for v2020.07 as we are too late for v2020.04 or?
> >>> I think I can spend some time for the next merge window to tackle
> >>> this folder issue for all boards and then we rebase and adapt this  patch.
> >>
> >> Boards and drivers which are self-contained can apparently go in even
> >> during RC cycle.
> >
> > ok. I prepared a patch to tackle the renaming topic and will upload
> > it. Let's see what gets in first. We can then rebase this patch if necessary.
> 
> Indeed, your patch now conflicts with Heiko's patch and this patch.
> This will be quite a headache to merge, so I would suggest you update your
> patch once the other ones are in, since yours is just moving files around.

yes I can wait until the other two patches are in. I can then also
address the other open points for the renaming.

Best regards
Holger
diff mbox series

Patch

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index be4cf029d0..9c593b2c98 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -333,6 +333,7 @@  dtb-$(CONFIG_THUNDERX) += thunderx-88xx.dtb
 
 dtb-$(CONFIG_ARCH_SOCFPGA) +=				\
 	socfpga_agilex_socdk.dtb			\
+	socfpga_arria5_secu1.dtb			\
 	socfpga_arria5_socdk.dtb			\
 	socfpga_arria10_socdk_sdmmc.dtb			\
 	socfpga_cyclone5_mcvevk.dtb			\
diff --git a/arch/arm/dts/socfpga_arria5_secu1.dts b/arch/arm/dts/socfpga_arria5_secu1.dts
new file mode 100644
index 0000000000..dadf766682
--- /dev/null
+++ b/arch/arm/dts/socfpga_arria5_secu1.dts
@@ -0,0 +1,130 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016-2020 ABB
+ */
+
+#include "socfpga_arria5.dtsi"
+#include "socfpga-common-u-boot.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "ABB SoC SECU1 Board";
+	compatible = "altr,socfpga-secu1", "altr,socfpga";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x20000000>; /* 512MB */
+	};
+
+	aliases {
+		/*
+		 * this allow the ethaddr uboot environment variable contents
+		 * to be added to the gmac0 device tree blob.
+		 */
+		ethernet0 = &gmac0;
+		spi0 = &spi1;
+	};
+
+	i2c_gpio: i2c at 0 {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpios = <&portc 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)	/* SDA */
+			 &portc 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;	/* SCL */
+		i2c-gpio,delay-us = <5>;	/* ~100 kHz */
+		i2c-gpio,deblock;
+
+		temp_sensor at 48 {
+			compatible = "national,lm75";
+			reg = <0x48>;
+		};
+
+		eeprom at 50 {
+			compatible = "at,24c08";
+			reg = <0x50>;
+		};
+
+		rtc: rtc at 68 {
+			compatible = "st,m41st87";
+			reg = <0x68>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 42 0x4>;
+		};
+	};
+
+	regulator_3_3v: 3-3-v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii";
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	bus-width = <4>;
+	u-boot,dm-pre-reloc;
+};
+
+&nand0 {
+	status = "okay";
+};
+
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&uart0 {
+	clock-frequency = <100000000>;
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&uart1 {
+	clock-frequency = <100000000>;
+};
+
+&watchdog0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index 969698c83f..38d6c1b2ba 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -96,6 +96,11 @@  config TARGET_SOCFPGA_ARRIA10_SOCDK
 	bool "Altera SOCFPGA SoCDK (Arria 10)"
 	select TARGET_SOCFPGA_ARRIA10
 
+config TARGET_SOCFPGA_ARRIA5_SECU1
+	bool "ABB SECU1 (Arria V)"
+	select TARGET_SOCFPGA_ARRIA5
+	select VENDOR_KM
+
 config TARGET_SOCFPGA_ARRIA5_SOCDK
 	bool "Altera SOCFPGA SoCDK (Arria V)"
 	select TARGET_SOCFPGA_ARRIA5
@@ -158,6 +163,7 @@  config SYS_BOARD
 	default "de10-nano" if TARGET_SOCFPGA_TERASIC_DE10_NANO
 	default "is1" if TARGET_SOCFPGA_IS1
 	default "mcvevk" if TARGET_SOCFPGA_ARIES_MCVEVK
+	default "secu1" if TARGET_SOCFPGA_ARRIA5_SECU1
 	default "sockit" if TARGET_SOCFPGA_TERASIC_SOCKIT
 	default "socrates" if TARGET_SOCFPGA_EBV_SOCRATES
 	default "sr1500" if TARGET_SOCFPGA_SR1500
@@ -173,6 +179,7 @@  config SYS_VENDOR
 	default "aries" if TARGET_SOCFPGA_ARIES_MCVEVK
 	default "devboards" if TARGET_SOCFPGA_DEVBOARDS_DBM_SOC1
 	default "ebv" if TARGET_SOCFPGA_EBV_SOCRATES
+	default "keymile" if TARGET_SOCFPGA_ARRIA5_SECU1
 	default "softing" if TARGET_SOCFPGA_SOFTING_VINING_FPGA
 	default "terasic" if TARGET_SOCFPGA_TERASIC_DE0_NANO
 	default "terasic" if TARGET_SOCFPGA_TERASIC_DE1_SOC
@@ -184,6 +191,7 @@  config SYS_SOC
 
 config SYS_CONFIG_NAME
 	default "socfpga_agilex_socdk" if TARGET_SOCFPGA_AGILEX_SOCDK
+	default "socfpga_arria5_secu1" if TARGET_SOCFPGA_ARRIA5_SECU1
 	default "socfpga_arria5_socdk" if TARGET_SOCFPGA_ARRIA5_SOCDK
 	default "socfpga_arria10_socdk" if TARGET_SOCFPGA_ARRIA10_SOCDK
 	default "socfpga_cyclone5_socdk" if TARGET_SOCFPGA_CYCLONE5_SOCDK
@@ -199,4 +207,6 @@  config SYS_CONFIG_NAME
 	default "socfpga_stratix10_socdk" if TARGET_SOCFPGA_STRATIX10_SOCDK
 	default "socfpga_vining_fpga" if TARGET_SOCFPGA_SOFTING_VINING_FPGA
 
+source "board/keymile/Kconfig"
+
 endif
diff --git a/board/keymile/Kconfig b/board/keymile/Kconfig
index 634dbbe097..7f4cad86aa 100644
--- a/board/keymile/Kconfig
+++ b/board/keymile/Kconfig
@@ -14,6 +14,7 @@  menu "KM Board Setup"
 config KM_PNVRAM
 	hex "Pseudo RAM"
 	default 0x80000
+	depends on !ARCH_SOCFPGA
 	help
 	  Start address of the pseudo non-volatile RAM for application.
 
@@ -21,6 +22,7 @@  config KM_PHRAM
 	hex "Physical RAM"
 	default 0x17F000 if ARM
 	default 0x100000 if PPC
+	depends on !ARCH_SOCFPGA
 	help
 	  Start address of the physical RAM, which is the mounted /var folder.
 
@@ -29,6 +31,7 @@  config KM_RESERVED_PRAM
 	default 0x801000 if KIRKWOOD
 	default 0x0 if MPC83xx
 	default 0x1000 if MPC85xx
+	depends on !ARCH_SOCFPGA
 	help
 	  Reserved physical RAM area at the end of memory for special purposes.
 
@@ -37,6 +40,7 @@  config KM_CRAMFS_ADDR
 	default 0x2400000 if KIRKWOOD
 	default 0xC00000 if MPC83xx
 	default 0x2000000 if MPC85xx
+	depends on !ARCH_SOCFPGA
 	help
 	  Start address of the CRAMFS containing the Linux kernel.
 
@@ -44,13 +48,13 @@  config KM_KERNEL_ADDR
 	hex "Kernel Load Address"
 	default 0x2000000 if KIRKWOOD
 	default 0x400000 if MPC83xx
-	default 0x1000000 if MPC85xx
+	default 0x1000000 if MPC85xx || ARCH_SOCFPGA
 	help
 	  Address where to load Linux kernel in RAM.
 
 config KM_FDT_ADDR
 	hex "FDT Load Address"
-	default 0x23E0000 if KIRKWOOD
+	default 0x23E0000 if KIRKWOOD || ARCH_SOCFPGA
 	default 0xB80000 if MPC83xx
 	default 0x1F80000 if MPC85xx
 	help
@@ -71,7 +75,7 @@  config KM_DEF_NETDEV
 config KM_COMMON_ETH_INIT
 	bool "Common Ethernet Initialization"
 	default y if KIRKWOOD || MPC83xx
-	default n if MPC85xx
+	default n if MPC85xx || ARCH_SOCFPGA
 	help
 	  Use the Ethernet initialization implemented in common code, which
 	  detects if a Piggy board is present.
@@ -91,6 +95,7 @@  config KM_MVEXTSW_ADDR
 
 config KM_IVM_BUS
 	int "IVM I2C Bus"
+	default 0 if ARCH_SOCFPGA
 	default 1 if KIRKWOOD || MPC85xx
 	default 2 if MPC83xx
 	help
diff --git a/board/keymile/common/ivm.c b/board/keymile/common/ivm.c
index fee7f03c8c..80dae73bb6 100644
--- a/board/keymile/common/ivm.c
+++ b/board/keymile/common/ivm.c
@@ -328,7 +328,23 @@  static int ivm_populate_env(unsigned char *buf, int len, int mac_address_offset)
 int ivm_read_eeprom(unsigned char *buf, int len, int mac_address_offset)
 {
 	int ret;
+#ifdef CONFIG_DM_I2C
+	struct udevice *eedev = NULL;
+
+	ret = i2c_get_chip_for_busnum(CONFIG_KM_IVM_BUS,
+				      CONFIG_SYS_I2C_EEPROM_ADDR, 1, &eedev);
+	if (ret) {
+		printf("failed to get device for EEPROM at address 0x50\n");
+		return 1;
+	}
 
+	ret = dm_i2c_read(eedev, 0, buf, len);
+	if (ret != 0) {
+		printf("Error: Unable to read from I2C EEPROM at address %02X:%02X\n",
+		       CONFIG_SYS_I2C_EEPROM_ADDR, 0);
+		return 1;
+	}
+#else
 	i2c_set_bus_num(CONFIG_KM_IVM_BUS);
 	/* add deblocking here */
 	i2c_make_abort();
@@ -338,6 +354,6 @@  int ivm_read_eeprom(unsigned char *buf, int len, int mac_address_offset)
 		printf("Error reading EEprom\n");
 		return -2;
 	}
-
+#endif
 	return ivm_populate_env(buf, len, mac_address_offset);
 }
diff --git a/board/keymile/secu1/Makefile b/board/keymile/secu1/Makefile
new file mode 100644
index 0000000000..4704d59e48
--- /dev/null
+++ b/board/keymile/secu1/Makefile
@@ -0,0 +1,7 @@ 
+#
+# (C) Copyright 2020 ABB
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= socfpga.o ../common/ivm.o
diff --git a/board/keymile/secu1/qts/iocsr_config.h b/board/keymile/secu1/qts/iocsr_config.h
new file mode 100644
index 0000000000..7640c56db1
--- /dev/null
+++ b/board/keymile/secu1/qts/iocsr_config.h
@@ -0,0 +1,694 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+ * Altera SoCFPGA IOCSR configuration
+ */
+
+#ifndef __SOCFPGA_IOCSR_CONFIG_H__
+#define __SOCFPGA_IOCSR_CONFIG_H__
+
+#define CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH	1337
+#define CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH	1719
+#define CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH	1528
+#define CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH	16766
+
+const unsigned long iocsr_scan_chain0_table[] = {
+	0x00100000,
+	0x40000000,
+	0x00000000,
+	0x00000100,
+	0x00040000,
+	0x00008000,
+	0x00080000,
+	0x20000000,
+	0x00000000,
+	0x00000080,
+	0x00020000,
+	0x00004000,
+	0x00040000,
+	0x10000000,
+	0x00000000,
+	0x00000040,
+	0x00010000,
+	0x00002000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000020,
+	0x00008000,
+	0x00001000,
+	0x00000000,
+	0x0300C000,
+	0x0000000C,
+	0x00000000,
+	0x00000000,
+	0x00000800,
+	0x01806018,
+	0x00000000,
+	0x01800000,
+	0x00001806,
+	0x00001806,
+	0x00000400,
+	0x00C0300C,
+	0x00C03000,
+	0x00C00003,
+	0x00000C03,
+	0x00300C03,
+	0x00000200,
+};
+
+const unsigned long iocsr_scan_chain1_table[] = {
+	0x00100000,
+	0x40000000,
+	0x00000000,
+	0x00000100,
+	0x00040000,
+	0x00008000,
+	0x00060180,
+	0x18060000,
+	0x00000000,
+	0x00000080,
+	0x00020000,
+	0x00004000,
+	0x00040000,
+	0x10000000,
+	0x00000000,
+	0x00000040,
+	0x00010000,
+	0x00002000,
+	0x00020000,
+	0x08000000,
+	0x01FE0000,
+	0xF8000000,
+	0x00000007,
+	0x00001000,
+	0x00010000,
+	0x04000000,
+	0x00000000,
+	0x00000010,
+	0x00004000,
+	0x00000800,
+	0x00006018,
+	0x01806000,
+	0x00000006,
+	0x00000008,
+	0x00601806,
+	0x00000400,
+	0x0000300C,
+	0x00C03000,
+	0x00C00000,
+	0x00000003,
+	0x00000C03,
+	0x00000200,
+	0x00000000,
+	0x00601800,
+	0x80600000,
+	0x80000001,
+	0x00000601,
+	0x00000100,
+	0x00300C03,
+	0xC0300C00,
+	0xC0300000,
+	0xC0000300,
+	0x000C0300,
+	0x00000080,
+};
+
+const unsigned long iocsr_scan_chain2_table[] = {
+	0x00100000,
+	0x40000000,
+	0x00000000,
+	0x00000100,
+	0x00040000,
+	0x00008000,
+	0x00080000,
+	0x20000000,
+	0x00000000,
+	0x00000080,
+	0x00020000,
+	0x00004000,
+	0x00040000,
+	0x10000000,
+	0x00000000,
+	0x00000040,
+	0x00010000,
+	0x00002000,
+	0x00018060,
+	0x08000000,
+	0x00000000,
+	0x00000020,
+	0x00008000,
+	0x00001000,
+	0x0300C030,
+	0x00000000,
+	0x03000000,
+	0x0000000C,
+	0x00C0300C,
+	0x00000800,
+	0x01806018,
+	0x01806000,
+	0x00000006,
+	0x00000000,
+	0x00601806,
+	0x00000400,
+	0x00C0300C,
+	0x00C03000,
+	0x00C00003,
+	0x00000C03,
+	0x00300C03,
+	0x00000200,
+	0x00601806,
+	0x80601800,
+	0x80600001,
+	0x80000601,
+	0x00180601,
+	0x00000100,
+};
+
+const unsigned long iocsr_scan_chain3_table[] = {
+	0x2CC20D80,
+	0x082000FF,
+	0x08028001,
+	0x00100000,
+	0x08020000,
+	0x00100000,
+	0x0A800000,
+	0x07900000,
+	0x08020000,
+	0x00100000,
+	0x00000000,
+	0xC0000010,
+	0x00C00512,
+	0x00000000,
+	0x00000021,
+	0x82000004,
+	0x05400000,
+	0x03C80000,
+	0x04010000,
+	0x00080000,
+	0x05400000,
+	0x03C80000,
+	0x05400000,
+	0x03C80000,
+	0xA2580000,
+	0x60001800,
+	0x00600289,
+	0x800A2580,
+	0x00000001,
+	0x40000002,
+	0x02A00000,
+	0x01E40000,
+	0x02A00000,
+	0x01E40000,
+	0x02A00000,
+	0x01E40000,
+	0x02A00000,
+	0x01E40000,
+	0x512C0000,
+	0xB0000C00,
+	0x00300144,
+	0xC00512C0,
+	0x144B0000,
+	0x20000300,
+	0x00040000,
+	0x50670000,
+	0x00000050,
+	0x24590000,
+	0x00001000,
+	0xA0000034,
+	0x0D000001,
+	0xA0680514,
+	0xC3034028,
+	0x06181A00,
+	0x805140D0,
+	0x34069A06,
+	0x01A034D0,
+	0x240D0000,
+	0x28A06809,
+	0x00000340,
+	0xD000001A,
+	0x06809240,
+	0x10040000,
+	0x00200000,
+	0x10040000,
+	0x00200000,
+	0x15000000,
+	0x0F200000,
+	0x15000000,
+	0x0F200000,
+	0x01FE0000,
+	0x80000000,
+	0x01800A25,
+	0x00289600,
+	0x007F8006,
+	0x00000000,
+	0x0A800001,
+	0x07900000,
+	0x0A800000,
+	0x07900000,
+	0x0A800000,
+	0x07900000,
+	0x08020000,
+	0x00100000,
+	0x44B00000,
+	0xC0003001,
+	0x00C00512,
+	0x00000FF0,
+	0x512C0000,
+	0x80000C00,
+	0x05400000,
+	0x02480000,
+	0x04000000,
+	0x00080000,
+	0x05400000,
+	0x03C80000,
+	0x05400000,
+	0x03C80000,
+	0x581D8000,
+	0x60001800,
+	0x00600289,
+	0x800A2580,
+	0x16076001,
+	0x40000600,
+	0x02A00040,
+	0x01E40000,
+	0x02A00000,
+	0x01E40000,
+	0x02A00000,
+	0x01E40000,
+	0x02A00000,
+	0x01E40000,
+	0x512C0000,
+	0xB0000C00,
+	0x00300144,
+	0xC00512C0,
+	0x144B0000,
+	0x20000300,
+	0x00040000,
+	0x50670000,
+	0x00000050,
+	0x24590000,
+	0x00001000,
+	0xA0000034,
+	0x0D000001,
+	0xA0680514,
+	0x4D034028,
+	0x1A681A03,
+	0x805140D0,
+	0x34069A06,
+	0x01A00020,
+	0x240D0001,
+	0x49206809,
+	0x034D0340,
+	0xD01A681A,
+	0x06805140,
+	0x10040000,
+	0x00200000,
+	0x10040000,
+	0x00200000,
+	0x15000000,
+	0x0F200000,
+	0x15000000,
+	0x0F200000,
+	0x01FE0000,
+	0x80000000,
+	0x01800A25,
+	0x00289600,
+	0x007F8006,
+	0x00000000,
+	0x99300001,
+	0x34343400,
+	0xAA0D4000,
+	0x01C3A800,
+	0xAA0D4000,
+	0x01C3A800,
+	0xAA0D4000,
+	0x01C3A800,
+	0x00040100,
+	0x00000800,
+	0x00000000,
+	0x00001208,
+	0x00482000,
+	0x01000000,
+	0x00000000,
+	0x00410482,
+	0x0006A000,
+	0x0001B400,
+	0x00020000,
+	0x00000400,
+	0x0002A000,
+	0x0001E400,
+	0x5506A000,
+	0x00E1D400,
+	0x00000000,
+	0x44B0090C,
+	0x00003001,
+	0x90400000,
+	0x00000000,
+	0x2020C243,
+	0x2A835000,
+	0x0070EA00,
+	0x2A835000,
+	0x0070EA00,
+	0x2A835000,
+	0x0070EA00,
+	0x00010040,
+	0x00000200,
+	0x00000000,
+	0x00000482,
+	0x00120800,
+	0x00002000,
+	0x80000000,
+	0x00104120,
+	0x00000200,
+	0xAC0D5F80,
+	0xFFFFFFFF,
+	0x14F3690D,
+	0x1A041414,
+	0x00D00000,
+	0x1C864000,
+	0x45147A07,
+	0xA228A3DA,
+	0xF491451E,
+	0x0358D348,
+	0x821A0000,
+	0x0000D000,
+	0x028A0680,
+	0xDA79E47A,
+	0x1EA228A3,
+	0xC8F49965,
+	0x000344B2,
+	0x00080000,
+	0x00001000,
+	0x00080200,
+	0x00001000,
+	0x000A8000,
+	0x00075000,
+	0x541A8000,
+	0x03875001,
+	0x00000000,
+	0x00000020,
+	0x0080C000,
+	0x41000000,
+	0x00003FC2,
+	0x00820000,
+	0xAA0D4000,
+	0x01C3A800,
+	0xAA0D4000,
+	0x01C3A800,
+	0xAA0D4000,
+	0x01C3A800,
+	0x00040000,
+	0x00000800,
+	0x00000000,
+	0x00001208,
+	0x00482000,
+	0x01000000,
+	0x00000000,
+	0x00410482,
+	0x0006A000,
+	0x0001B400,
+	0x00020000,
+	0x00000400,
+	0x00020080,
+	0x00000400,
+	0x5506A000,
+	0x00E1D400,
+	0x00000000,
+	0x0000090C,
+	0x00000010,
+	0x90400000,
+	0x00000000,
+	0x2020C243,
+	0x2A835000,
+	0x0070EA00,
+	0x2A835000,
+	0x0070EA00,
+	0x2A835000,
+	0x0070EA00,
+	0x00015000,
+	0x0000F200,
+	0x00000000,
+	0x00000482,
+	0x60120800,
+	0x00600289,
+	0x80000000,
+	0x00104120,
+	0x00000200,
+	0xAC0D5F80,
+	0xFFFFFFFF,
+	0x14F3690D,
+	0x1A041414,
+	0x00D00000,
+	0x14864000,
+	0x59647A05,
+	0xC228A3DC,
+	0xF491451E,
+	0x0344B2C8,
+	0x821A034D,
+	0x0000D000,
+	0x00000680,
+	0xD469A47A,
+	0x1E83CF23,
+	0xC8F71E79,
+	0x000344B2,
+	0x00080000,
+	0x00001000,
+	0x00080000,
+	0x00001000,
+	0x000A8000,
+	0x00075000,
+	0x541A8000,
+	0x03875001,
+	0x00000000,
+	0x00000020,
+	0x0080C000,
+	0x41000000,
+	0x00000002,
+	0x00820008,
+	0xAA0D4000,
+	0x01C3A800,
+	0xAA0D4000,
+	0x01C3A800,
+	0xAA0D4000,
+	0x01C3A800,
+	0x00040000,
+	0x00000800,
+	0x00000000,
+	0x00001208,
+	0x00482000,
+	0x01000000,
+	0x00000000,
+	0x00410482,
+	0x0006A000,
+	0x0001B400,
+	0x00020000,
+	0x00000400,
+	0x00020080,
+	0x00000400,
+	0x5506A000,
+	0x00E1D400,
+	0x00000000,
+	0x0000090C,
+	0x00000010,
+	0x90400000,
+	0x00000000,
+	0x2020C243,
+	0x2A835000,
+	0x0070EA00,
+	0x2A835000,
+	0x0070EA00,
+	0x2A835000,
+	0x0070EA00,
+	0x00010000,
+	0x00000200,
+	0x00000000,
+	0x00000482,
+	0x00120800,
+	0x00400000,
+	0x80000000,
+	0x00104120,
+	0x00000200,
+	0xAC0D5F80,
+	0xFFFFFFFF,
+	0x14F1690D,
+	0x1A041414,
+	0x00D00000,
+	0x0C864000,
+	0x79E47A03,
+	0x92AAA3D2,
+	0xF595551E,
+	0x034CF3C8,
+	0x821A0000,
+	0x0000D000,
+	0x00000680,
+	0xDA79E47A,
+	0x1EA32CA3,
+	0xC8F69965,
+	0x000354F3,
+	0x00080000,
+	0x00001000,
+	0x00080000,
+	0x00001000,
+	0x000A8000,
+	0x00075000,
+	0x541A8000,
+	0x03875001,
+	0x00000000,
+	0x00000020,
+	0x0080C000,
+	0x41000000,
+	0x00000002,
+	0x00820008,
+	0xAA0D4000,
+	0x01C3A800,
+	0xAA0D4000,
+	0x01C3A800,
+	0xAA0D4000,
+	0x01C3A800,
+	0x00040000,
+	0x00000800,
+	0x00000000,
+	0x00001208,
+	0x00482000,
+	0x01000000,
+	0x00000000,
+	0x00410482,
+	0x0006A000,
+	0x0001B400,
+	0x00020000,
+	0x00000400,
+	0x00020000,
+	0x00000400,
+	0x5506A000,
+	0x00E1D400,
+	0x00000000,
+	0x0000090C,
+	0x00002000,
+	0x90400000,
+	0x00000000,
+	0x2020C243,
+	0x2A835000,
+	0x0070EA00,
+	0x2A835000,
+	0x0070EA00,
+	0x2A835000,
+	0x0070EA00,
+	0x00010040,
+	0x00000200,
+	0x00000000,
+	0x00000482,
+	0x00120800,
+	0x00400000,
+	0x80000000,
+	0x00104120,
+	0x00000200,
+	0xAC0D5F80,
+	0xFFFFFFFF,
+	0x14F1690D,
+	0x1A041414,
+	0x00D00000,
+	0x0C864000,
+	0x59647A03,
+	0xC3CF23DC,
+	0xF711451E,
+	0x0358D348,
+	0x821A0000,
+	0x0000D000,
+	0x00000680,
+	0xD459647A,
+	0x1E83CF23,
+	0x48F51E79,
+	0x000348D3,
+	0x00080000,
+	0x00001000,
+	0x00080000,
+	0x00001000,
+	0x000A8000,
+	0x00075000,
+	0x541A8000,
+	0x03875001,
+	0x00000000,
+	0x00000020,
+	0x0080C000,
+	0x41000000,
+	0x00000002,
+	0x00820008,
+	0x00489800,
+	0x801A1A1A,
+	0x00000200,
+	0x80000004,
+	0x00000200,
+	0x80000004,
+	0x00000200,
+	0x00000004,
+	0x00000200,
+	0x00000004,
+	0x00040000,
+	0x10000000,
+	0x00000000,
+	0x00008000,
+	0x00010000,
+	0x40002000,
+	0x00000100,
+	0x40000002,
+	0x00000100,
+	0x00000002,
+	0x00000100,
+	0x40000002,
+	0x00000100,
+	0x00000002,
+	0x00020000,
+	0x00000000,
+	0x00000010,
+	0x00000020,
+	0x00008000,
+	0x20001000,
+	0x00000080,
+	0x20000001,
+	0x00000080,
+	0x20000001,
+	0x00000080,
+	0x20000001,
+	0x00000080,
+	0x00000001,
+	0x00010000,
+	0x04000000,
+	0x00FF0000,
+	0x00000000,
+	0x00004000,
+	0x00000800,
+	0xC0000001,
+	0x00141419,
+	0x40000000,
+	0x04000816,
+	0x000D0000,
+	0x00006800,
+	0x00000340,
+	0xD000001A,
+	0x06800000,
+	0x00340000,
+	0x0001A000,
+	0x00000D00,
+	0x40000068,
+	0x1A000003,
+	0x00D00000,
+	0x00068000,
+	0x00003400,
+	0x000001A0,
+	0x00000401,
+	0x00000008,
+	0x00000401,
+	0x00000008,
+	0x00000401,
+	0x00000008,
+	0x00000401,
+	0x80000008,
+	0x0000007F,
+	0x20000000,
+	0x00000000,
+	0xE0000080,
+	0x0000001F,
+	0x00004000,
+};
+
+#endif /* __SOCFPGA_IOCSR_CONFIG_H__ */
diff --git a/board/keymile/secu1/qts/pinmux_config.h b/board/keymile/secu1/qts/pinmux_config.h
new file mode 100644
index 0000000000..a9406060ed
--- /dev/null
+++ b/board/keymile/secu1/qts/pinmux_config.h
@@ -0,0 +1,218 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+ * Altera SoCFPGA PinMux configuration
+ */
+
+#ifndef __SOCFPGA_PINMUX_CONFIG_H__
+#define __SOCFPGA_PINMUX_CONFIG_H__
+
+const u8 sys_mgr_init_table[] = {
+	3, /* EMACIO0 */
+	3, /* EMACIO1 */
+	3, /* EMACIO2 */
+	3, /* EMACIO3 */
+	3, /* EMACIO4 */
+	3, /* EMACIO5 */
+	3, /* EMACIO6 */
+	3, /* EMACIO7 */
+	3, /* EMACIO8 */
+	3, /* EMACIO9 */
+	3, /* EMACIO10 */
+	3, /* EMACIO11 */
+	3, /* EMACIO12 */
+	3, /* EMACIO13 */
+	0, /* EMACIO14 */
+	0, /* EMACIO15 */
+	0, /* EMACIO16 */
+	0, /* EMACIO17 */
+	0, /* EMACIO18 */
+	0, /* EMACIO19 */
+	0, /* FLASHIO0 */
+	0, /* FLASHIO1 */
+	0, /* FLASHIO2 */
+	0, /* FLASHIO3 */
+	0, /* FLASHIO4 */
+	0, /* FLASHIO5 */
+	0, /* FLASHIO6 */
+	0, /* FLASHIO7 */
+	0, /* FLASHIO8 */
+	0, /* FLASHIO9 */
+	0, /* FLASHIO10 */
+	0, /* FLASHIO11 */
+	3, /* GENERALIO0 */
+	3, /* GENERALIO1 */
+	3, /* GENERALIO2 */
+	3, /* GENERALIO3 */
+	3, /* GENERALIO4 */
+	3, /* GENERALIO5 */
+	3, /* GENERALIO6 */
+	3, /* GENERALIO7 */
+	3, /* GENERALIO8 */
+	3, /* GENERALIO9 */
+	3, /* GENERALIO10 */
+	3, /* GENERALIO11 */
+	3, /* GENERALIO12 */
+	3, /* GENERALIO13 */
+	3, /* GENERALIO14 */
+	0, /* GENERALIO15 */
+	0, /* GENERALIO16 */
+	0, /* GENERALIO17 */
+	0, /* GENERALIO18 */
+	0, /* GENERALIO19 */
+	0, /* GENERALIO20 */
+	0, /* GENERALIO21 */
+	0, /* GENERALIO22 */
+	0, /* GENERALIO23 */
+	0, /* GENERALIO24 */
+	0, /* GENERALIO25 */
+	0, /* GENERALIO26 */
+	0, /* GENERALIO27 */
+	0, /* GENERALIO28 */
+	0, /* GENERALIO29 */
+	0, /* GENERALIO30 */
+	0, /* GENERALIO31 */
+	3, /* MIXED1IO0 */
+	3, /* MIXED1IO1 */
+	3, /* MIXED1IO2 */
+	3, /* MIXED1IO3 */
+	3, /* MIXED1IO4 */
+	3, /* MIXED1IO5 */
+	3, /* MIXED1IO6 */
+	3, /* MIXED1IO7 */
+	3, /* MIXED1IO8 */
+	3, /* MIXED1IO9 */
+	3, /* MIXED1IO10 */
+	3, /* MIXED1IO11 */
+	3, /* MIXED1IO12 */
+	3, /* MIXED1IO13 */
+	3, /* MIXED1IO14 */
+	0, /* MIXED1IO15 */
+	0, /* MIXED1IO16 */
+	0, /* MIXED1IO17 */
+	0, /* MIXED1IO18 */
+	0, /* MIXED1IO19 */
+	0, /* MIXED1IO20 */
+	0, /* MIXED1IO21 */
+	0, /* MIXED2IO0 */
+	0, /* MIXED2IO1 */
+	0, /* MIXED2IO2 */
+	0, /* MIXED2IO3 */
+	0, /* MIXED2IO4 */
+	0, /* MIXED2IO5 */
+	0, /* MIXED2IO6 */
+	0, /* MIXED2IO7 */
+	0, /* GPLINMUX48 */
+	0, /* GPLINMUX49 */
+	0, /* GPLINMUX50 */
+	0, /* GPLINMUX51 */
+	0, /* GPLINMUX52 */
+	0, /* GPLINMUX53 */
+	0, /* GPLINMUX54 */
+	0, /* GPLINMUX55 */
+	0, /* GPLINMUX56 */
+	0, /* GPLINMUX57 */
+	0, /* GPLINMUX58 */
+	0, /* GPLINMUX59 */
+	0, /* GPLINMUX60 */
+	0, /* GPLINMUX61 */
+	0, /* GPLINMUX62 */
+	0, /* GPLINMUX63 */
+	0, /* GPLINMUX64 */
+	0, /* GPLINMUX65 */
+	0, /* GPLINMUX66 */
+	0, /* GPLINMUX67 */
+	0, /* GPLINMUX68 */
+	0, /* GPLINMUX69 */
+	0, /* GPLINMUX70 */
+	1, /* GPLMUX0 */
+	1, /* GPLMUX1 */
+	1, /* GPLMUX2 */
+	1, /* GPLMUX3 */
+	1, /* GPLMUX4 */
+	1, /* GPLMUX5 */
+	1, /* GPLMUX6 */
+	1, /* GPLMUX7 */
+	1, /* GPLMUX8 */
+	1, /* GPLMUX9 */
+	1, /* GPLMUX10 */
+	1, /* GPLMUX11 */
+	1, /* GPLMUX12 */
+	1, /* GPLMUX13 */
+	1, /* GPLMUX14 */
+	1, /* GPLMUX15 */
+	1, /* GPLMUX16 */
+	1, /* GPLMUX17 */
+	1, /* GPLMUX18 */
+	1, /* GPLMUX19 */
+	1, /* GPLMUX20 */
+	1, /* GPLMUX21 */
+	1, /* GPLMUX22 */
+	1, /* GPLMUX23 */
+	1, /* GPLMUX24 */
+	1, /* GPLMUX25 */
+	1, /* GPLMUX26 */
+	1, /* GPLMUX27 */
+	1, /* GPLMUX28 */
+	1, /* GPLMUX29 */
+	1, /* GPLMUX30 */
+	1, /* GPLMUX31 */
+	1, /* GPLMUX32 */
+	1, /* GPLMUX33 */
+	1, /* GPLMUX34 */
+	1, /* GPLMUX35 */
+	1, /* GPLMUX36 */
+	1, /* GPLMUX37 */
+	1, /* GPLMUX38 */
+	1, /* GPLMUX39 */
+	1, /* GPLMUX40 */
+	1, /* GPLMUX41 */
+	1, /* GPLMUX42 */
+	1, /* GPLMUX43 */
+	1, /* GPLMUX44 */
+	1, /* GPLMUX45 */
+	1, /* GPLMUX46 */
+	1, /* GPLMUX47 */
+	1, /* GPLMUX48 */
+	1, /* GPLMUX49 */
+	1, /* GPLMUX50 */
+	1, /* GPLMUX51 */
+	1, /* GPLMUX52 */
+	1, /* GPLMUX53 */
+	1, /* GPLMUX54 */
+	1, /* GPLMUX55 */
+	1, /* GPLMUX56 */
+	1, /* GPLMUX57 */
+	1, /* GPLMUX58 */
+	1, /* GPLMUX59 */
+	1, /* GPLMUX60 */
+	1, /* GPLMUX61 */
+	1, /* GPLMUX62 */
+	1, /* GPLMUX63 */
+	1, /* GPLMUX64 */
+	1, /* GPLMUX65 */
+	1, /* GPLMUX66 */
+	1, /* GPLMUX67 */
+	1, /* GPLMUX68 */
+	1, /* GPLMUX69 */
+	1, /* GPLMUX70 */
+	0, /* NANDUSEFPGA */
+	0, /* UART0USEFPGA */
+	0, /* RGMII1USEFPGA */
+	0, /* SPIS0USEFPGA */
+	0, /* CAN0USEFPGA */
+	0, /* I2C0USEFPGA */
+	0, /* SDMMCUSEFPGA */
+	0, /* QSPIUSEFPGA */
+	0, /* SPIS1USEFPGA */
+	0, /* RGMII0USEFPGA */
+	0, /* UART1USEFPGA */
+	0, /* CAN1USEFPGA */
+	0, /* USB1USEFPGA */
+	0, /* I2C3USEFPGA */
+	0, /* I2C2USEFPGA */
+	0, /* I2C1USEFPGA */
+	1, /* SPIM1USEFPGA */
+	0, /* USB0USEFPGA */
+	0 /* SPIM0USEFPGA */
+};
+#endif /* __SOCFPGA_PINMUX_CONFIG_H__ */
diff --git a/board/keymile/secu1/qts/pll_config.h b/board/keymile/secu1/qts/pll_config.h
new file mode 100644
index 0000000000..f0c31860ca
--- /dev/null
+++ b/board/keymile/secu1/qts/pll_config.h
@@ -0,0 +1,83 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+ * Altera SoCFPGA Clock and PLL configuration
+ */
+
+#ifndef __SOCFPGA_PLL_CONFIG_H__
+#define __SOCFPGA_PLL_CONFIG_H__
+
+#define CONFIG_HPS_DBCTRL_STAYOSC1 1
+
+#define CONFIG_HPS_MAINPLLGRP_VCO_DENOM 0
+#define CONFIG_HPS_MAINPLLGRP_VCO_NUMER 39
+#define CONFIG_HPS_MAINPLLGRP_MPUCLK_CNT 0
+#define CONFIG_HPS_MAINPLLGRP_MAINCLK_CNT 0
+#define CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT 0
+#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT 511
+#define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT 511
+#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT 15
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK 1
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK 1
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK 1
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4SPCLK 1
+#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGATCLK 0
+#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGCLK 1
+#define CONFIG_HPS_MAINPLLGRP_TRACEDIV_TRACECLK 0
+#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4MP 1
+#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4SP 1
+
+#define CONFIG_HPS_PERPLLGRP_VCO_DENOM 0
+#define CONFIG_HPS_PERPLLGRP_VCO_NUMER 24
+#define CONFIG_HPS_PERPLLGRP_VCO_PSRC 0
+#define CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT 3
+#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT 511
+#define CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT 511
+#define CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT 7
+#define CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT 4
+#define CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT 511
+#define CONFIG_HPS_PERPLLGRP_DIV_USBCLK 4
+#define CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK 0
+#define CONFIG_HPS_PERPLLGRP_DIV_CAN0CLK 4
+#define CONFIG_HPS_PERPLLGRP_DIV_CAN1CLK 4
+#define CONFIG_HPS_PERPLLGRP_GPIODIV_GPIODBCLK 6249
+#define CONFIG_HPS_PERPLLGRP_SRC_SDMMC 1
+#define CONFIG_HPS_PERPLLGRP_SRC_NAND 2
+#define CONFIG_HPS_PERPLLGRP_SRC_QSPI 1
+
+#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM 0
+#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER 14
+#define CONFIG_HPS_SDRPLLGRP_VCO_SSRC 0
+#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_CNT 1
+#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_PHASE 0
+#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_CNT 0
+#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_PHASE 0
+#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_CNT 1
+#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_PHASE 4
+#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_CNT 1
+#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_PHASE 0
+
+#define CONFIG_HPS_CLK_OSC1_HZ 40000000
+#define CONFIG_HPS_CLK_OSC2_HZ 40000000
+#define CONFIG_HPS_CLK_F2S_SDR_REF_HZ 0
+#define CONFIG_HPS_CLK_F2S_PER_REF_HZ 0
+#define CONFIG_HPS_CLK_MAINVCO_HZ 1600000000
+#define CONFIG_HPS_CLK_PERVCO_HZ 1000000000
+#define CONFIG_HPS_CLK_SDRVCO_HZ 600000000
+#define CONFIG_HPS_CLK_EMAC0_HZ 250000000
+#define CONFIG_HPS_CLK_EMAC1_HZ 1953125
+#define CONFIG_HPS_CLK_USBCLK_HZ 12500000
+#define CONFIG_HPS_CLK_NAND_HZ 31250000
+#define CONFIG_HPS_CLK_SDMMC_HZ 3125000
+#define CONFIG_HPS_CLK_QSPI_HZ 3125000
+#define CONFIG_HPS_CLK_SPIM_HZ 200000000
+#define CONFIG_HPS_CLK_CAN0_HZ 12500000
+#define CONFIG_HPS_CLK_CAN1_HZ 12500000
+#define CONFIG_HPS_CLK_GPIODB_HZ 32000
+#define CONFIG_HPS_CLK_L4_MP_HZ 100000000
+#define CONFIG_HPS_CLK_L4_SP_HZ 100000000
+
+#define CONFIG_HPS_ALTERAGRP_MPUCLK 1
+#define CONFIG_HPS_ALTERAGRP_MAINCLK 3
+#define CONFIG_HPS_ALTERAGRP_DBGATCLK 3
+
+#endif /* __SOCFPGA_PLL_CONFIG_H__ */
diff --git a/board/keymile/secu1/qts/sdram_config.h b/board/keymile/secu1/qts/sdram_config.h
new file mode 100644
index 0000000000..b0ff86ef38
--- /dev/null
+++ b/board/keymile/secu1/qts/sdram_config.h
@@ -0,0 +1,327 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+ * Altera SoCFPGA SDRAM configuration
+ *
+ */
+
+#ifndef __SOCFPGA_SDRAM_CONFIG_H__
+#define __SOCFPGA_SDRAM_CONFIG_H__
+
+/* SDRAM configuration */
+#define CONFIG_HPS_SDR_CTRLCFG_CPORTRDWR_CPORTRDWR		0x5A56A
+#define CONFIG_HPS_SDR_CTRLCFG_CPORTRMAP_CPORTRMAP		0xB00088
+#define CONFIG_HPS_SDR_CTRLCFG_CPORTWIDTH_CPORTWIDTH		0x44555
+#define CONFIG_HPS_SDR_CTRLCFG_CPORTWMAP_CPORTWMAP		0x2C011000
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ADDRORDER		0
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_DQSTRKEN			0
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN		0
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN			0
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMBL			8
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMTYPE			1
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_NODMPINS			0
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_REORDEREN		1
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_STARVELIMIT		10
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLWIDTH_CTRLWIDTH		2
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS		3
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_COLBITS		10
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS			1
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS		14
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMDEVWIDTH_DEVWIDTH		8
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH		32
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMINTR_INTREN			0
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMODT_READ			0
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMODT_WRITE			1
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_AL			0
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL			5
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL			4
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TFAW			16
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRFC			60
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD			4
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRCD		5
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TREFI		2341
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRP		5
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWR		5
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWTR		2
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TCCD			4
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TMRD			2
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRAS			13
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRC			17
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP			3
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_PWRDOWNEXIT		3
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_SELFRFSHEXIT		200
+#define CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_WR 3
+#define CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_WR_BC 3
+#define CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_WR_DIFF_CHIP 3
+#define CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_INCSYNC			0
+#define CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_SYNCMODE			0
+#define CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST			0x0
+#define CONFIG_HPS_SDR_CTRLCFG_LOWPWREQ_SELFRFSHMASK		3
+#define CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_AUTOPDCYCLES	0
+#define CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_CLKDISABLECYCLES	8
+#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_0_THRESHOLD1_31_0	0x20820820
+#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_1_THRESHOLD1_59_32	0x8208208
+#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_1_THRESHOLD2_3_0	0
+#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_2_THRESHOLD2_35_4	0x41041041
+#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_3_THRESHOLD2_59_36	0x410410
+#define CONFIG_HPS_SDR_CTRLCFG_MPPRIORITY_USERPRIORITY		0x0
+#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_0_THRESHOLDRSTCYCLES_31_0 0x01010101
+#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_1_THRESHOLDRSTCYCLES_63_32 0x01010101
+#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_2_THRESHOLDRSTCYCLES_79_64 0x0101
+#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_0_STATICWEIGHT_31_0	0x21084210
+#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_1_STATICWEIGHT_49_32	0x10441
+#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_1_SUMOFWEIGHT_13_0	0x78
+#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_2_SUMOFWEIGHT_45_14	0x0
+#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_3_SUMOFWEIGHT_63_46	0x0
+#define CONFIG_HPS_SDR_CTRLCFG_PHYCTRL_PHYCTRL_0		0x200
+#define CONFIG_HPS_SDR_CTRLCFG_PORTCFG_AUTOPCHEN		0
+#define CONFIG_HPS_SDR_CTRLCFG_RFIFOCMAP_RFIFOCMAP		0x760210
+#define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_MEMBL			2
+#define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_USEECCASDATA		0
+#define CONFIG_HPS_SDR_CTRLCFG_WFIFOCMAP_WFIFOCMAP		0x980543
+
+/* Sequencer auto configuration */
+#define RW_MGR_ACTIVATE_0_AND_1	0x11
+#define RW_MGR_ACTIVATE_0_AND_1_WAIT1	0x12
+#define RW_MGR_ACTIVATE_0_AND_1_WAIT2	0x14
+#define RW_MGR_CLEAR_DQS_ENABLE	0x4B
+#define RW_MGR_EMR	0x09
+#define RW_MGR_EMR2	0x0D
+#define RW_MGR_EMR3	0x0F
+#define RW_MGR_EMR_OCD_ENABLE	0x0B
+#define RW_MGR_GUARANTEED_READ	0x4E
+#define RW_MGR_GUARANTEED_READ_CONT	0x56
+#define RW_MGR_GUARANTEED_WRITE	0x1A
+#define RW_MGR_GUARANTEED_WRITE_WAIT0	0x1D
+#define RW_MGR_GUARANTEED_WRITE_WAIT1	0x21
+#define RW_MGR_GUARANTEED_WRITE_WAIT2	0x1B
+#define RW_MGR_GUARANTEED_WRITE_WAIT3	0x1F
+#define RW_MGR_IDLE	0x00
+#define RW_MGR_IDLE_LOOP1	0x77
+#define RW_MGR_IDLE_LOOP2	0x76
+#define RW_MGR_INIT_CKE_0	0x71
+#define RW_MGR_LFSR_WR_RD_BANK_0	0x24
+#define RW_MGR_LFSR_WR_RD_BANK_0_DATA	0x27
+#define RW_MGR_LFSR_WR_RD_BANK_0_DQS	0x26
+#define RW_MGR_LFSR_WR_RD_BANK_0_NOP	0x25
+#define RW_MGR_LFSR_WR_RD_BANK_0_WAIT	0x34
+#define RW_MGR_LFSR_WR_RD_BANK_0_WL_1	0x23
+#define RW_MGR_LFSR_WR_RD_DM_BANK_0	0x38
+#define RW_MGR_LFSR_WR_RD_DM_BANK_0_DATA	0x3B
+#define RW_MGR_LFSR_WR_RD_DM_BANK_0_DQS	0x3A
+#define RW_MGR_LFSR_WR_RD_DM_BANK_0_NOP	0x39
+#define RW_MGR_LFSR_WR_RD_DM_BANK_0_WAIT	0x48
+#define RW_MGR_LFSR_WR_RD_DM_BANK_0_WL_1	0x37
+#define RW_MGR_MR_CALIB	0x05
+#define RW_MGR_MR_DLL_RESET	0x07
+#define RW_MGR_MR_USER	0x03
+#define RW_MGR_NOP	0x01
+#define RW_MGR_PRECHARGE_ALL	0x16
+#define RW_MGR_READ_B2B	0x5B
+#define RW_MGR_READ_B2B_WAIT1	0x63
+#define RW_MGR_READ_B2B_WAIT2	0x6D
+#define RW_MGR_REFRESH	0x18
+
+/* Sequencer defines configuration */
+#define AFI_CLK_FREQ	301
+#define AFI_RATE_RATIO	1
+#define CALIB_LFIFO_OFFSET	6
+#define CALIB_VFIFO_OFFSET	4
+#define ENABLE_SUPER_QUICK_CALIBRATION	0
+#define IO_DELAY_PER_DCHAIN_TAP	25
+#define IO_DELAY_PER_DQS_EN_DCHAIN_TAP	25
+#define IO_DELAY_PER_OPA_TAP	416
+#define IO_DLL_CHAIN_LENGTH	8
+#define IO_DQDQS_OUT_PHASE_MAX	0
+#define IO_DQS_EN_DELAY_MAX	31
+#define IO_DQS_EN_DELAY_OFFSET	0
+#define IO_DQS_EN_PHASE_MAX	7
+#define IO_DQS_IN_DELAY_MAX	31
+#define IO_DQS_IN_RESERVE	4
+#define IO_DQS_OUT_RESERVE	4
+#define IO_IO_IN_DELAY_MAX	31
+#define IO_IO_OUT1_DELAY_MAX	31
+#define IO_IO_OUT2_DELAY_MAX	0
+#define IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS	0
+#define MAX_LATENCY_COUNT_WIDTH	5
+#define READ_VALID_FIFO_SIZE	16
+#define REG_FILE_INIT_SEQ_SIGNATURE	0x555504bf
+#define RW_MGR_MEM_ADDRESS_MIRRORING	0
+#define RW_MGR_MEM_DATA_MASK_WIDTH	4
+#define RW_MGR_MEM_DATA_WIDTH	32
+#define RW_MGR_MEM_DQ_PER_READ_DQS	8
+#define RW_MGR_MEM_DQ_PER_WRITE_DQS	8
+#define RW_MGR_MEM_IF_READ_DQS_WIDTH	4
+#define RW_MGR_MEM_IF_WRITE_DQS_WIDTH	4
+#define RW_MGR_MEM_NUMBER_OF_CS_PER_DIMM	1
+#define RW_MGR_MEM_NUMBER_OF_RANKS	1
+#define RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS	1
+#define RW_MGR_MEM_VIRTUAL_GROUPS_PER_WRITE_DQS	1
+#define RW_MGR_TRUE_MEM_DATA_MASK_WIDTH	4
+#define TINIT_CNTR0_VAL	74
+#define TINIT_CNTR1_VAL	20
+#define TINIT_CNTR2_VAL	20
+#define TRESET_CNTR0_VAL	74
+#define TRESET_CNTR1_VAL	99
+#define TRESET_CNTR2_VAL	10
+
+/* Sequencer ac_rom_init configuration */
+const u32 ac_rom_init[] = {
+	0x30700000,
+	0x38700000,
+	0x30700000,
+	0x20700000,
+	0x10000853,
+	0x10000853,
+	0x10000953,
+	0x10010000,
+	0x10010380,
+	0x10020000,
+	0x10030000,
+	0x10300400,
+	0x10600000,
+	0x10620000,
+	0x10200400,
+	0x10400000,
+	0x1c900000,
+	0x1c920000,
+	0x1c900008,
+	0x1c920008,
+	0x38f00000,
+	0x3cf00000,
+	0x38700000,
+	0x10100000,
+	0x18900000,
+	0x13500000,
+	0x13520000,
+	0x13500008,
+	0x13520008,
+	0x33700000,
+	0x10500008
+};
+
+/* Sequencer inst_rom_init configuration */
+const u32 inst_rom_init[] = {
+	0x80180,
+	0x100,
+	0x80000,
+	0x200,
+	0x80000,
+	0x280,
+	0x80000,
+	0x300,
+	0x80000,
+	0x380,
+	0x80000,
+	0x400,
+	0x80000,
+	0x480,
+	0x80000,
+	0x500,
+	0x80000,
+	0x600,
+	0x8000,
+	0x680,
+	0xa000,
+	0x80000,
+	0x700,
+	0x80000,
+	0x780,
+	0x80000,
+	0x968,
+	0xcae8,
+	0x8e8,
+	0x8ae8,
+	0x988,
+	0xea88,
+	0x808,
+	0xaa88,
+	0x80000,
+	0xcc00,
+	0xcb80,
+	0xe080,
+	0xa00,
+	0x20ae0,
+	0x20ae0,
+	0x20ae0,
+	0x20ae0,
+	0xb00,
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+	0x60c80,
+	0x60e80,
+	0x60e80,
+	0x60e80,
+	0xa000,
+	0x8000,
+	0x80000,
+	0xcc00,
+	0xcb80,
+	0xe080,
+	0xa00,
+	0x30ae0,
+	0x30ae0,
+	0x30ae0,
+	0x30ae0,
+	0xb00,
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+	0x70c80,
+	0x70e80,
+	0x70e80,
+	0x70e80,
+	0xa000,
+	0x8000,
+	0x80000,
+	0xf58,
+	0x58,
+	0x80000,
+	0xf68,
+	0x168,
+	0x168,
+	0x8168,
+	0x40de8,
+	0x40ee8,
+	0x40ee8,
+	0x40ee8,
+	0xf68,
+	0x168,
+	0x168,
+	0xa168,
+	0x80000,
+	0x40c88,
+	0x40e88,
+	0x40e88,
+	0x40e88,
+	0x40d68,
+	0x40ee8,
+	0x40ee8,
+	0x40ee8,
+	0xa000,
+	0x40de8,
+	0x40ee8,
+	0x40ee8,
+	0x40ee8,
+	0x40e08,
+	0x40e88,
+	0x40e88,
+	0x40e88,
+	0xf00,
+	0xc000,
+	0x8000,
+	0xe000,
+	0x80000,
+	0x180,
+	0x8180,
+	0xa180,
+	0xc180,
+	0x80180,
+	0x8000,
+	0xa000,
+	0x80000
+};
+
+#endif /* __SOCFPGA_SDRAM_CONFIG_H__ */
diff --git a/board/keymile/secu1/socfpga.c b/board/keymile/secu1/socfpga.c
new file mode 100644
index 0000000000..dc04a21abe
--- /dev/null
+++ b/board/keymile/secu1/socfpga.c
@@ -0,0 +1,67 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017-2020 ABB
+ */
+#include <common.h>
+#include <i2c.h>
+#include <asm/gpio.h>
+
+#include "../common/common.h"
+
+/*
+ * For FU1, the MAC address associated with the mgmt port should
+ * be the base address (as read from the IVM) + 4, and for FU2 it
+ * is + 10
+ */
+#define MAC_ADDRESS_OFFSET_FU1	4
+#define MAC_ADDRESS_OFFSET_FU2	10
+
+/*
+ * This function reads the state of GPIO40 and returns true (non-zero)
+ * if it is '1' and false(0) otherwise.
+ *
+ * This pin is routed to a pull-up on FU2 and a pull-down on
+ */
+#define GPIO_FU_DETECTION	40
+
+int secu1_is_fu2(void)
+{
+	int value;
+	int ret = gpio_request(GPIO_FU_DETECTION, "secu");
+
+	if (ret) {
+		printf("gpio: failed to request pin for FU  detection\n");
+		return 1;
+	}
+	gpio_direction_input(GPIO_FU_DETECTION);
+	value = gpio_get_value(GPIO_FU_DETECTION);
+
+	if (value == 1)
+		printf("FU2 detected\n");
+	else
+		printf("FU1 detected\n");
+
+	return value;
+}
+
+static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
+
+#if defined(CONFIG_HUSH_INIT_VAR)
+int hush_init_var(void)
+{
+	ivm_analyze_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
+	return 0;
+}
+#endif
+
+int misc_init_r(void)
+{
+	if (secu1_is_fu2())
+		ivm_read_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN,
+				MAC_ADDRESS_OFFSET_FU2);
+	else
+		ivm_read_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN,
+				MAC_ADDRESS_OFFSET_FU1);
+
+	return 0;
+}
diff --git a/configs/socfpga_secu1_defconfig b/configs/socfpga_secu1_defconfig
new file mode 100644
index 0000000000..d81c6fdfb3
--- /dev/null
+++ b/configs/socfpga_secu1_defconfig
@@ -0,0 +1,83 @@ 
+CONFIG_ARM=y
+CONFIG_ARCH_SOCFPGA=y
+CONFIG_SYS_MALLOC_F_LEN=0x800
+CONFIG_ENV_SIZE=0x1000
+CONFIG_ENV_OFFSET=0x100000
+CONFIG_DM_GPIO=y
+# CONFIG_SPL_MMC_SUPPORT is not set
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_TARGET_SOCFPGA_ARRIA5_SECU1=y
+CONFIG_ENV_OFFSET_REDUND=0x120000
+# CONFIG_SPL_LIBDISK_SUPPORT is not set
+# CONFIG_SPL_SPI_SUPPORT is not set
+CONFIG_SPL_TEXT_BASE=0xFFFF0000
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BUILD_TARGET="u-boot-with-nand-spl.sfp"
+CONFIG_FIT=y
+# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
+CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
+CONFIG_DEFAULT_FDT_FILE="socfpga_arria5_secu1.dtb"
+CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y
+# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
+# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION is not set
+CONFIG_SPL_MTD_SUPPORT=y
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_EEPROM=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND_TRIMFFS=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_WDT=y
+CONFIG_CMD_CACHE=y
+CONFIG_MTDIDS_DEFAULT="nand0=denali-nand"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=denali-nand:512k(nand.4spl),512k(nand.uboot),128k(nand.env1),128k(nand.env2),0x1000000(nand.rec),0x3ee40000(nand.ubi),0x80000 at 0x3ff80000(nand.bbt)"
+CONFIG_CMD_UBI=y
+# CONFIG_CMD_UBIFS is not set
+# CONFIG_ISO_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria5_secu1"
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+# CONFIG_SPL_BLK is not set
+CONFIG_DWAPB_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_DM_I2C_GPIO=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x50
+CONFIG_SYS_EEPROM_SIZE=1024
+CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
+CONFIG_DM_MMC=y
+CONFIG_MMC_DW=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_DENALI_DT=y
+CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=2
+CONFIG_SPL_NAND_DENALI=y
+# CONFIG_DM_SPI_FLASH is not set
+CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1
+CONFIG_MV88E6352_SWITCH=y
+CONFIG_PHY_FIXED=y
+CONFIG_DM_ETH=y
+CONFIG_PHY_GIGE=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_MII=y
+CONFIG_DM_RESET=y
+CONFIG_SPI=y
+CONFIG_SPI_MEM=y
+CONFIG_DESIGNWARE_SPI=y
+CONFIG_DESIGNWARE_WATCHDOG=y
+CONFIG_WDT=y
+# CONFIG_GZIP is not set
diff --git a/include/configs/socfpga_arria5_secu1.h b/include/configs/socfpga_arria5_secu1.h
new file mode 100644
index 0000000000..b059100ccd
--- /dev/null
+++ b/include/configs/socfpga_arria5_secu1.h
@@ -0,0 +1,131 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017-2020 ABB
+ *
+ */
+#ifndef __CONFIG_SOCFPGA_SECU1_H__
+#define __CONFIG_SOCFPGA_SECU1_H__
+
+#include <asm/arch/base_addr_ac5.h>
+
+/* Call misc_init_r */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_HUSH_INIT_VAR
+/* Eternal oscillator */
+#define CONFIG_SYS_TIMER_RATE	40000000
+
+/* Memory configurations */
+#define PHYS_SDRAM_1_SIZE	0x20000000	/* 512MiB on SECU1 */
+
+/*
+ * We use bootcounter in i2c nvram of the RTC (0x68)
+ * The offset fopr the bootcounter is 0x9e, which are
+ * the last two bytes of the 128 bytes large NVRAM in the
+ * RTC which begin at address 0x20
+ */
+#define CONFIG_SYS_I2C_RTC_ADDR         0x68
+
+/* Booting Linux */
+#define CONFIG_BOOTDELAY	2
+#define CONFIG_BOOTFILE		"zImage"
+#define CONFIG_BOOTARGS		\
+	"console=ttyS0," __stringify(CONFIG_BAUDRATE) \
+	" ubi.fm_autoconvert=1" \
+	" uio_pdrv_genirq.of_id=\"idq,regbank\""
+
+#define CONFIG_BOOTCOMMAND	\
+	"setenv bootcmd '"	\
+		"bridge enable; "	\
+		"if test ${bootnum} = \"b\"; " \
+		      "then run _fpga_loadsafe; " \
+		"else if test ${bootcount} -eq 4; then echo \"Switching copy...\"; setexpr x $bootnum % 2 && setexpr bootnum $x + 1; saveenv; fi; " \
+		      "run _fpga_loaduser; " \
+		"fi;" \
+		"echo \"Booting bank $bootnum\" && run userload && run userboot;" \
+	"' && " \
+	"setenv altbootcmd 'setenv bootnum b && saveenv && boot;' && " \
+	"saveenv && saveenv && boot;"
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SYS_BOOTM_LEN		(64 << 20)
+
+/* Environment settings */
+#define CONFIG_ENV_OVERWRITE
+
+/*
+ * Autoboot
+ *
+ * After 45s of inactivity in the prompt, the board will reset.
+ * Set 'bootretry' in the environment to -1 to disable this behavior
+ */
+#define CONFIG_BOOT_RETRY_TIME 45
+#define CONFIG_RESET_TO_RETRY
+
+#define CONFIG_LOADADDR		0x01000000
+#define CONFIG_SYS_LOAD_ADDR   CONFIG_KM_KERNEL_ADDR
+
+/*
+ * FPGA Remote Update related environment
+ *
+ * Note that since those commands access the FPGA, the HPS-to-FPGA
+ * bridges MUST have been previously enabled (for example
+ * with 'bridge enable').
+ */
+#define FPGA_RMTU_ENV \
+	"rmtu_page=0xFF29000C\0" \
+	"rmtu_reconfig=0xFF290018\0" \
+	"fpga_safebase=0x0\0" \
+	"fpga_userbase=0x2000000\0" \
+	"_fpga_loaduser=echo Loading FPGA USER image..." \
+		" && mw ${rmtu_page} ${fpga_userbase} && mw ${rmtu_reconfig} 1\0" \
+	"_fpga_loadsafe=echo Loading FPGA SAFE image..." \
+		" && mw ${rmtu_page} ${fpga_safebase} && mw ${rmtu_reconfig} 1\0" \
+
+#define CONFIG_KM_NEW_ENV \
+	"newenv=" \
+		"nand erase 0x100000 0x40000\0"
+
+#define CONFIG_KM_DEF_ENV_BOOTTARGETS \
+	"release=" \
+		"run newenv; reset\0" \
+	"develop=" \
+		"tftp 0x200000 scripts/develop-secu.txt && env import -t 0x200000 ${filesize} && saveenv && reset\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	FPGA_RMTU_ENV \
+	CONFIG_KM_DEF_ENV_BOOTTARGETS \
+	CONFIG_KM_NEW_ENV \
+	"socfpga_legacy_reset_compat=1\0"	\
+	"altbootcmd=run bootcmd;\0"	\
+	"bootlimit=6\0"	\
+	"bootnum=1\0" \
+	"bootretry=" __stringify(CONFIG_BOOT_RETRY_TIME) "\0" \
+	"fdt_addr=" __stringify(CONFIG_KM_FDT_ADDR) "\0" \
+	"load=tftpboot ${loadaddr} u-boot-with-nand-spl.sfp\0" \
+	"loadaddr=" __stringify(CONFIG_KM_KERNEL_ADDR) "\0" \
+	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
+	"update=nand erase 0x0 0x00100000 && nand write ${loadaddr} 0x0 ${filesize}\0" \
+	"userload=ubi part nand.ubi &&" \
+		"ubi check rootfs$bootnum &&" \
+		"ubi read $fdt_addr dtb$bootnum &&" \
+		"ubi read $loadaddr kernel$bootnum\0" \
+	"userboot=setenv bootargs " CONFIG_BOOTARGS \
+		" ubi.mtd=1 ubi.block=0,rootfs$bootnum root=/dev/ubiblock0_$ubivolid"	\
+		" ro rootfstype=squashfs init=sbin/preinit;" \
+		"bootz ${loadaddr} - ${fdt_addr}\0" \
+	"verify=y\0"
+
+/* The rest of the configuration is shared */
+#include <configs/socfpga_common.h>
+
+#ifdef CONFIG_SPL_NAND_SUPPORT
+#undef CONFIG_SYS_NAND_U_BOOT_OFFS
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
+#endif
+
+#undef CONFIG_WATCHDOG_TIMEOUT_MSECS
+#define CONFIG_WATCHDOG_TIMEOUT_MSECS	60000
+
+#endif	/* __CONFIG_SOCFPGA_SECU1_H__ */