diff mbox series

imx: remove woodburn board

Message ID 20200219133625.21457-1-sbabic@denx.de
State Accepted
Commit c82b70bcc3b73934a1aeaeceb52561a3950a1fc5
Headers show
Series imx: remove woodburn board | expand

Commit Message

Stefano Babic Feb. 19, 2020, 1:36 p.m. UTC
Board is not longer used, remove it.

Signed-off-by: Stefano Babic <sbabic at denx.de>
---
 arch/arm/Kconfig                  |  10 --
 board/woodburn/Kconfig            |  25 ---
 board/woodburn/MAINTAINERS        |  12 --
 board/woodburn/Makefile           |   8 -
 board/woodburn/imximage.cfg       |   4 -
 board/woodburn/lowlevel_init.S    |  24 ---
 board/woodburn/woodburn.c         | 251 ------------------------------
 configs/woodburn_defconfig        |  51 ------
 configs/woodburn_sd_defconfig     |  63 --------
 include/configs/woodburn.h        |  18 ---
 include/configs/woodburn_common.h | 195 -----------------------
 include/configs/woodburn_sd.h     |  30 ----
 12 files changed, 691 deletions(-)
 delete mode 100644 board/woodburn/Kconfig
 delete mode 100644 board/woodburn/MAINTAINERS
 delete mode 100644 board/woodburn/Makefile
 delete mode 100644 board/woodburn/imximage.cfg
 delete mode 100644 board/woodburn/lowlevel_init.S
 delete mode 100644 board/woodburn/woodburn.c
 delete mode 100644 configs/woodburn_defconfig
 delete mode 100644 configs/woodburn_sd_defconfig
 delete mode 100644 include/configs/woodburn.h
 delete mode 100644 include/configs/woodburn_common.h
 delete mode 100644 include/configs/woodburn_sd.h

Comments

Stefano Babic March 10, 2020, 3:31 p.m. UTC | #1
> Board is not longer used, remove it.
> Signed-off-by: Stefano Babic <sbabic at denx.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic
diff mbox series

Patch

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8d9f7fcce7..3d3d070223 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -598,15 +598,6 @@  config TARGET_X600
 	select PL011_SERIAL
 	select SUPPORT_SPL
 
-config TARGET_WOODBURN
-	bool "Support woodburn"
-	select CPU_ARM1136
-
-config TARGET_WOODBURN_SD
-	bool "Support woodburn_sd"
-	select CPU_ARM1136
-	select SUPPORT_SPL
-
 config TARGET_FLEA3
 	bool "Support flea3"
 	select CPU_ARM1136
@@ -1880,7 +1871,6 @@  source "board/birdland/bav335x/Kconfig"
 source "board/toradex/colibri_pxa270/Kconfig"
 source "board/variscite/dart_6ul/Kconfig"
 source "board/vscom/baltos/Kconfig"
-source "board/woodburn/Kconfig"
 source "board/xilinx/Kconfig"
 source "board/xilinx/zynq/Kconfig"
 source "board/xilinx/zynqmp/Kconfig"
diff --git a/board/woodburn/Kconfig b/board/woodburn/Kconfig
deleted file mode 100644
index 4699526cfd..0000000000
--- a/board/woodburn/Kconfig
+++ /dev/null
@@ -1,25 +0,0 @@ 
-if TARGET_WOODBURN
-
-config SYS_BOARD
-	default "woodburn"
-
-config SYS_SOC
-	default "mx35"
-
-config SYS_CONFIG_NAME
-	default "woodburn"
-
-endif
-
-if TARGET_WOODBURN_SD
-
-config SYS_BOARD
-	default "woodburn"
-
-config SYS_SOC
-	default "mx35"
-
-config SYS_CONFIG_NAME
-	default "woodburn_sd"
-
-endif
diff --git a/board/woodburn/MAINTAINERS b/board/woodburn/MAINTAINERS
deleted file mode 100644
index 4fbf6bb88b..0000000000
--- a/board/woodburn/MAINTAINERS
+++ /dev/null
@@ -1,12 +0,0 @@ 
-WOODBURN BOARD
-M:	Stefano Babic <sbabic at denx.de>
-S:	Maintained
-F:	board/woodburn/
-F:	include/configs/woodburn.h
-F:	configs/woodburn_defconfig
-
-WOODBURN_SD BOARD
-#M:	-
-S:	Maintained
-F:	include/configs/woodburn_sd.h
-F:	configs/woodburn_sd_defconfig
diff --git a/board/woodburn/Makefile b/board/woodburn/Makefile
deleted file mode 100644
index 9c3cd6934a..0000000000
--- a/board/woodburn/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2007, Guennadi Liakhovetski <lg at denx.de>
-#
-# (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
-
-obj-y	:= woodburn.o
-obj-y	+= lowlevel_init.o
diff --git a/board/woodburn/imximage.cfg b/board/woodburn/imximage.cfg
deleted file mode 100644
index ba42a5e7d5..0000000000
--- a/board/woodburn/imximage.cfg
+++ /dev/null
@@ -1,4 +0,0 @@ 
-BOOT_FROM      sd
-
-/* DDR2 init */
-DATA 4 0xB8001010 0x00000304
diff --git a/board/woodburn/lowlevel_init.S b/board/woodburn/lowlevel_init.S
deleted file mode 100644
index 8186b3922b..0000000000
--- a/board/woodburn/lowlevel_init.S
+++ /dev/null
@@ -1,24 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2007, Guennadi Liakhovetski <lg at denx.de>
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * Copyright (C) 2011, Stefano Babic <sbabic at denx.de>
- */
-
-#include <config.h>
-#include <asm/arch/lowlevel_macro.S>
-
-.globl lowlevel_init
-lowlevel_init:
-
-	core_init
-
-	init_aips
-
-	init_max
-
-	init_m3if
-
-	mov pc, lr
diff --git a/board/woodburn/woodburn.c b/board/woodburn/woodburn.c
deleted file mode 100644
index c69df6c7bf..0000000000
--- a/board/woodburn/woodburn.c
+++ /dev/null
@@ -1,251 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2012, Stefano Babic <sbabic at denx.de>
- *
- * Based on flea3.c and mx35pdk.c
- */
-
-#include <common.h>
-#include <init.h>
-#include <asm/io.h>
-#include <linux/errno.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/iomux-mx35.h>
-#include <i2c.h>
-#include <power/pmic.h>
-#include <fsl_pmic.h>
-#include <mc13892.h>
-#include <mmc.h>
-#include <fsl_esdhc_imx.h>
-#include <linux/types.h>
-#include <asm/gpio.h>
-#include <asm/arch/sys_proto.h>
-#include <netdev.h>
-#include <spl.h>
-
-#define CCM_CCMR_CONFIG		0x003F4208
-
-#define ESDCTL_DDR2_CONFIG	0x007FFC3F
-
-/* For MMC */
-#define GPIO_MMC_CD	7
-#define GPIO_MMC_WP	8
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1,
-		PHYS_SDRAM_1_SIZE);
-
-	return 0;
-}
-
-static void board_setup_sdram(void)
-{
-	struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR;
-
-	/* Initialize with default values both CSD0/1 */
-	writel(0x2000, &esdc->esdctl0);
-	writel(0x2000, &esdc->esdctl1);
-
-	mx3_setup_sdram_bank(CSD0_BASE_ADDR, ESDCTL_DDR2_CONFIG,
-		 13, 10, 2, 0x8080);
-}
-
-static void setup_iomux_fec(void)
-{
-	static const iomux_v3_cfg_t fec_pads[] = {
-		MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
-		MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
-		MX35_PAD_FEC_RX_DV__FEC_RX_DV,
-		MX35_PAD_FEC_COL__FEC_COL,
-		MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
-		MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
-		MX35_PAD_FEC_TX_EN__FEC_TX_EN,
-		MX35_PAD_FEC_MDC__FEC_MDC,
-		MX35_PAD_FEC_MDIO__FEC_MDIO,
-		MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
-		MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
-		MX35_PAD_FEC_CRS__FEC_CRS,
-		MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
-		MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
-		MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
-		MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
-		MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
-		MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
-	};
-
-	/* setup pins for FEC */
-	imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
-}
-
-int woodburn_init(void)
-{
-	struct ccm_regs *ccm =
-		(struct ccm_regs *)IMX_CCM_BASE;
-
-	/* initialize PLL and clock configuration */
-	writel(CCM_CCMR_CONFIG, &ccm->ccmr);
-
-	/* Set-up RAM */
-	board_setup_sdram();
-
-	/* enable clocks */
-	writel(readl(&ccm->cgr0) |
-		MXC_CCM_CGR0_EMI_MASK |
-		MXC_CCM_CGR0_EDIO_MASK |
-		MXC_CCM_CGR0_EPIT1_MASK,
-		&ccm->cgr0);
-
-	writel(readl(&ccm->cgr1) |
-		MXC_CCM_CGR1_FEC_MASK |
-		MXC_CCM_CGR1_GPIO1_MASK |
-		MXC_CCM_CGR1_GPIO2_MASK |
-		MXC_CCM_CGR1_GPIO3_MASK |
-		MXC_CCM_CGR1_I2C1_MASK |
-		MXC_CCM_CGR1_I2C2_MASK |
-		MXC_CCM_CGR1_I2C3_MASK,
-		&ccm->cgr1);
-
-	/* Set-up NAND */
-	__raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr);
-
-	/* Set pinmux for the required peripherals */
-	setup_iomux_fec();
-
-	/* setup GPIO1_4 FEC_ENABLE signal */
-	imx_iomux_v3_setup_pad(MX35_PAD_SCKR__GPIO1_4);
-	gpio_direction_output(4, 1);
-	imx_iomux_v3_setup_pad(MX35_PAD_HCKT__GPIO1_9);
-	gpio_direction_output(9, 1);
-
-	return 0;
-}
-
-#if defined(CONFIG_SPL_BUILD)
-void board_init_f(ulong dummy)
-{
-	/* Set the stack pointer. */
-	asm volatile("mov sp, %0\n" : : "r"(CONFIG_SPL_STACK));
-
-	/* Initialize MUX and SDRAM */
-	woodburn_init();
-
-	/* Clear the BSS. */
-	memset(__bss_start, 0, __bss_end - __bss_start);
-
-	preloader_console_init();
-	timer_init();
-
-	board_init_r(NULL, 0);
-}
-
-void spl_board_init(void)
-{
-}
-
-#endif
-
-
-/* Booting from NOR in external mode */
-int board_early_init_f(void)
-{
-	return woodburn_init();
-}
-
-
-int board_init(void)
-{
-	struct pmic *p;
-	u32 val;
-	int ret;
-
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	ret = pmic_init(I2C_PMIC);
-	if (ret)
-		return ret;
-
-	p = pmic_get("FSL_PMIC");
-
-	/*
-	 * Set switchers in Auto in NORMAL mode & STANDBY mode
-	 * Setup the switcher mode for SW1 & SW2
-	 */
-	pmic_reg_read(p, REG_SW_4, &val);
-	val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) |
-		(SWMODE_MASK << SWMODE2_SHIFT)));
-	val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) |
-		(SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
-	/* Set SWILIMB */
-	val |= (1 << 22);
-	pmic_reg_write(p, REG_SW_4, val);
-
-	/* Setup the switcher mode for SW3 & SW4 */
-	pmic_reg_read(p, REG_SW_5, &val);
-	val &= ~((SWMODE_MASK << SWMODE4_SHIFT) |
-		(SWMODE_MASK << SWMODE3_SHIFT));
-	val |= (SWMODE_AUTO_AUTO << SWMODE4_SHIFT) |
-		(SWMODE_AUTO_AUTO << SWMODE3_SHIFT);
-	pmic_reg_write(p, REG_SW_5, val);
-
-	/* Set VGEN1 to 3.15V */
-	pmic_reg_read(p, REG_SETTING_0, &val);
-	val &= ~(VGEN1_MASK);
-	val |= VGEN1_3_15;
-	pmic_reg_write(p, REG_SETTING_0, val);
-
-	pmic_reg_read(p, REG_MODE_0, &val);
-	val |= VGEN1EN;
-	pmic_reg_write(p, REG_MODE_0, val);
-	udelay(2000);
-
-	return 0;
-}
-
-#if defined(CONFIG_FSL_ESDHC_IMX)
-struct fsl_esdhc_cfg esdhc_cfg = {MMC_SDHC1_BASE_ADDR};
-
-int board_mmc_init(bd_t *bis)
-{
-	static const iomux_v3_cfg_t sdhc1_pads[] = {
-		MX35_PAD_SD1_CMD__ESDHC1_CMD,
-		MX35_PAD_SD1_CLK__ESDHC1_CLK,
-		MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
-		MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
-		MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
-		MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
-	};
-
-	/* configure pins for SDHC1 only */
-	imx_iomux_v3_setup_multiple_pads(sdhc1_pads, ARRAY_SIZE(sdhc1_pads));
-
-	/* MMC Card Detect on GPIO1_7 */
-	imx_iomux_v3_setup_pad(MX35_PAD_SCKT__GPIO1_7);
-	gpio_direction_input(GPIO_MMC_CD);
-
-	/* MMC Write Protection on GPIO1_8 */
-	imx_iomux_v3_setup_pad(MX35_PAD_FST__GPIO1_8);
-	gpio_direction_input(GPIO_MMC_WP);
-
-	esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
-
-	return fsl_esdhc_initialize(bis, &esdhc_cfg);
-}
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-	return !gpio_get_value(GPIO_MMC_CD);
-}
-#endif
-
-u32 get_board_rev(void)
-{
-	int rev = 0;
-
-	return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
-}
diff --git a/configs/woodburn_defconfig b/configs/woodburn_defconfig
deleted file mode 100644
index 2898564e95..0000000000
--- a/configs/woodburn_defconfig
+++ /dev/null
@@ -1,51 +0,0 @@ 
-CONFIG_ARM=y
-CONFIG_SYS_DCACHE_OFF=y
-CONFIG_TARGET_WOODBURN=y
-CONFIG_SYS_TEXT_BASE=0xA0000000
-CONFIG_ENV_SIZE=0x20000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_BOOTDELAY=3
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="woodburn U-Boot > "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=mxc_nand,nor0=physmap-flash.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=mxc_nand:50m(root1),32m(rootfb),64m(pcache),64m(app1),10m(app2),-(spool);physmap-flash.0:512k(u-boot),64k(env1),64k(env2),3776k(kernel1),3776k(kernel2)"
-CONFIG_EFI_PARTITION=y
-# CONFIG_PARTITION_UUIDS is not set
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR=0xA0080000
-CONFIG_ENV_ADDR_REDUND=0xA00A0000
-CONFIG_MXC_GPIO=y
-CONFIG_FSL_ESDHC_IMX=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_MXC=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_MICREL=y
-CONFIG_PHY_MICREL_KSZ8XXX=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_MXC_SPI=y
diff --git a/configs/woodburn_sd_defconfig b/configs/woodburn_sd_defconfig
deleted file mode 100644
index 99675054f0..0000000000
--- a/configs/woodburn_sd_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@ 
-CONFIG_ARM=y
-CONFIG_SYS_DCACHE_OFF=y
-CONFIG_TARGET_WOODBURN_SD=y
-CONFIG_SYS_TEXT_BASE=0x82000000
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x20000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_SPL=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SPL_TEXT_BASE=0x10002300
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/woodburn/imximage.cfg"
-CONFIG_BOOTDELAY=3
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_SPL_BOARD_INIT=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x100
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="woodburn U-Boot > "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=mxc_nand,nor0=physmap-flash.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=mxc_nand:50m(root1),32m(rootfb),64m(pcache),64m(app1),10m(app2),-(spool);physmap-flash.0:512k(u-boot),64k(env1),64k(env2),3776k(kernel1),3776k(kernel2)"
-CONFIG_EFI_PARTITION=y
-# CONFIG_PARTITION_UUIDS is not set
-# CONFIG_SPL_PARTITION_UUIDS is not set
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR=0xA0080000
-CONFIG_ENV_ADDR_REDUND=0xA00A0000
-CONFIG_MXC_GPIO=y
-CONFIG_FSL_ESDHC_IMX=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_MXC=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_MICREL=y
-CONFIG_PHY_MICREL_KSZ8XXX=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_MXC_SPI=y
diff --git a/include/configs/woodburn.h b/include/configs/woodburn.h
deleted file mode 100644
index 7f9ddb5b8e..0000000000
--- a/include/configs/woodburn.h
+++ /dev/null
@@ -1,18 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011, Stefano Babic <sbabic at denx.de>
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * Configuration for the woodburn board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/imx-regs.h>
-#include "woodburn_common.h"
-
-/* Set TEXT at the beginning of the NOR flash */
-
-#endif				/* __CONFIG_H */
diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h
deleted file mode 100644
index 194e43ecc6..0000000000
--- a/include/configs/woodburn_common.h
+++ /dev/null
@@ -1,195 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011, Stefano Babic <sbabic at denx.de>
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * Configuration for the woodburn board.
- */
-
-#ifndef __WOODBURN_COMMON_CONFIG_H
-#define __WOODBURN_COMMON_CONFIG_H
-
-#include <asm/arch/imx-regs.h>
-
- /* High Level Configuration Options */
-#define CONFIG_MX35
-#define CONFIG_MX35_HCLK_FREQ	24000000
-#define CONFIG_SYS_FSL_CLK
-
-#define CONFIG_MACH_TYPE		MACH_TYPE_FLEA3
-
-/* This is required to setup the ESDC controller */
-
-#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
-#define CONFIG_REVISION_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 1024 * 1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
-#define CONFIG_SYS_SPD_BUS_NUM		0
-
-/* PMIC Controller */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_FSL
-#define CONFIG_POWER_FSL_MC13892
-#define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x8
-#define CONFIG_RTC_MC13XXX
-
-/* mmc driver */
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
-#define CONFIG_SYS_FSL_ESDHC_NUM	1
-
-/*
- * UART (console)
- */
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE	UART1_BASE
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Command definition
- */
-
-#define CONFIG_NET_RETRY_COUNT	100
-
-
-#define CONFIG_LOADADDR		0x80800000	/* loadaddr env var */
-
-/*
- * Ethernet on SOC (FEC)
- */
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE	FEC_BASE_ADDR
-#define CONFIG_FEC_MXC_PHYADDR	0x1
-
-#define CONFIG_DISCOVER_PHY
-
-#define CONFIG_ARP_TIMEOUT	200UL
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_MEMTEST_START	0	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x10000
-
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-
-/*
- * Physical Memory Map
- */
-#define PHYS_SDRAM_1		CSD0_BASE_ADDR
-#define PHYS_SDRAM_1_SIZE	(256 * 1024 * 1024)
-
-#define CONFIG_SYS_SDRAM_BASE		CSD0_BASE_ADDR
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(LOW_LEVEL_SRAM_STACK - \
-						IRAM_BASE_ADDR - \
-						GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR		(IRAM_BASE_ADDR + \
-					CONFIG_SYS_GBL_DATA_OFFSET)
-
-/*
- * MTD Command for mtdparts
- */
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_FLASH_BASE		CS0_BASE_ADDR
-#define CONFIG_SYS_MAX_FLASH_BANKS 1	/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 512	/* max number of sectors on one chip */
-/* Monitor at beginning of flash */
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
-
-/* Address and size of Redundant Environment Sector	*/
-
-/*
- * CFI FLASH driver setup
- */
-
-/* A non-standard buffered write algorithm */
-
-/*
- * NAND FLASH driver setup
- */
-#define CONFIG_NAND_MXC_V1_1
-#define CONFIG_MXC_NAND_REGS_BASE	(NFC_BASE_ADDR)
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		(NFC_BASE_ADDR)
-#define CONFIG_MXC_NAND_HWECC
-#define CONFIG_SYS_NAND_LARGEPAGE
-
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
-/*
- * Default environment and default scripts
- * to update uboot and load kernel
- */
-
-#define CONFIG_HOSTNAME "woodburn"
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip_sta=setenv bootargs ${bootargs} "			\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"		\
-	"addip=if test -n ${ipdyn};then run addip_dyn;"			\
-		"else run addip_sta;fi\0"	\
-	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
-	"addtty=setenv bootargs ${bootargs}"				\
-		" console=ttymxc0,${baudrate}\0"			\
-	"addmisc=setenv bootargs ${bootargs} ${misc}\0"			\
-	"loadaddr=80800000\0"						\
-	"kernel_addr_r=80800000\0"					\
-	"hostname=" CONFIG_HOSTNAME "\0"			\
-	"bootfile=" CONFIG_HOSTNAME "/uImage\0"		\
-	"ramdisk_file=" CONFIG_HOSTNAME "/uRamdisk\0"	\
-	"flash_self=run ramargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"flash_nfs=run nfsargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr}\0"				\
-	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
-		"run nfsargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr_r}\0"				\
-	"net_self_load=tftp ${kernel_addr_r} ${bootfile};"		\
-		"tftp ${ramdisk_addr_r} ${ramdisk_file};\0"		\
-	"net_self=if run net_self_load;then "				\
-		"run ramargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr_r} ${ramdisk_addr_r};"		\
-		"else echo Images not loades;fi\0"			\
-	"u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"		\
-	"load=tftp ${loadaddr} ${u-boot}\0"				\
-	"uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"		\
-	"update=protect off ${uboot_addr} +80000;"			\
-		"erase ${uboot_addr} +80000;"				\
-		"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"		\
-	"upd=if run load;then echo Updating u-boot;if run update;"	\
-		"then echo U-Boot updated;"				\
-			"else echo Error updating u-boot !;"		\
-			"echo Board without bootloader !!;"		\
-		"fi;"							\
-		"else echo U-Boot not downloaded..exiting;fi\0"		\
-	"bootcmd=run net_nfs\0"
-
-#endif				/* __CONFIG_H */
diff --git a/include/configs/woodburn_sd.h b/include/configs/woodburn_sd.h
deleted file mode 100644
index 60d8a4b8c3..0000000000
--- a/include/configs/woodburn_sd.h
+++ /dev/null
@@ -1,30 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011, Stefano Babic <sbabic at denx.de>
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * Configuration for the woodburn board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/imx-regs.h>
-#include "woodburn_common.h"
-
-/* Set TEXT in RAM */
-
-/*
- * SPL
- */
-
-#define CONFIG_SPL_MAX_SIZE		(64 * 1024)	/* 8 KB for stack */
-#define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
-
-#define CONFIG_SYS_SPL_MALLOC_START	0x8f000000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
-#define CONFIG_SPL_BSS_START_ADDR	0x8f080000 /* end of RAM */
-#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
-
-#endif				/* __CONFIG_H */