diff mbox series

[v1,19/49] configs: ns3: enable sp805 watchdog driver

Message ID	20200427105207.5659-20-rayagonda.kokatanur@broadcom.com
State	New
Headers	show List-Id: U-Boot discussion <u-boot.lists.denx.de> From: rayagonda.kokatanur at broadcom.com (Rayagonda Kokatanur) Date: Mon, 27 Apr 2020 16:21:37 +0530 Subject: [PATCH v1 19/49] configs: ns3: enable sp805 watchdog driver In-Reply-To: <20200427105207.5659-1-rayagonda.kokatanur@broadcom.com> References: <20200427105207.5659-1-rayagonda.kokatanur@broadcom.com> Message-ID: <20200427105207.5659-20-rayagonda.kokatanur@broadcom.com>
Series	add support for broadcom NS3 soc \| expand [v1,00/49] add support for broadcom NS3 soc [v1,01/49] board: ns3: add support for Broadcom Northstar 3 [v1,02/49] arm: cpu: armv8: add L3 memory flush support [v1,03/49] configs: ns3: enable clock subsystem [v1,04/49] arm: dts: ns3: add clock dt node [v1,05/49] configs: ns3: enable pinctrl driver [v1,06/49] dt-bindings: pinctrl: add ns3 pads definition [v1,07/49] arm: dts: ns3: add pinctrl node [v1,08/49] arm: dts: ns3: add gpio node [v1,09/49] gpio: do not include <asm/arch/gpio.h> on TARGET_BCMNS3 [v1,10/49] configs: ns3: enable BCM IPROC mmc driver [v1,11/49] arm: dts: ns3: add emmc node [v1,12/49] configs: ns3: enable mmc commands [v1,13/49] arm: dts: ns3: add qspi node [v1,14/49] dt-bindings: memory: ns3: add memory definitions [v1,15/49] arm: dts: ns3: add i2c node [v1,16/49] arm: dts: ns3: add PAXB PCIe host and phy node [v1,17/49] configs: ns3: enable gpt commands [v1,18/49] configs: ns3: enable EXT4 and FAT fs support [v1,19/49] configs: ns3: enable sp805 watchdog driver [v1,20/49] arm: dts: ns3: add sp805 watchdog node [v1,21/49] board: ns3: start sp805 watchdog service [v1,22/49] board: ns3: add api to save boot parameters passed from BL31 [v1,23/49] board: ns3: default reset type to L3 [v1,24/49] dt-bindings: memory: ns3: update GIC LPI address [v1,25/49] board: ns3: program GIC LPI tables [v1,26/49] configs: ns3: enable GIC ITS LPI table programing [v1,27/49] dt-bindings: memory: ns3: add ddr memory definition [v1,28/49] board: ns3: define ddr memory layout [v1,29/49] board: ns3: limit U-boot relocation within 16MB memory [v1,30/49] configs: ns3: enable FIT config [v1,31/49] board: ns3: add FIT image its file [v1,32/49] board: ns3: add development keys used in FIT [v1,33/49] configs: ns3: enable PXE boot command [v1,34/49] configs: ns3: enable RPMB [v1,35/49] board: ns3: add optee based bnxt fw load driver [v1,36/49] configs: ns3: enable tee and optee driver [v1,37/49] arm: dts: ns3: add optee node [v1,38/49] board: ns3: add generic MCU IPC command send API [v1,39/49] include/configs: ns3: add env variables for Linux boot [v1,40/49] configs: ns3: env in mmc [v1,41/49] include/configs: ns3: add support for flashing images [v1,42/49] common: ns3: add error logging support [v1,43/49] board: ns3: kconfig: extend board kconfig with specific commands [v1,44/49] cmd: bcm: add broadcom error log setup command [v1,45/49] cmd: gpt: add eMMC and GPT support [v1,46/49] cmd: bcm: add nitro boot command [v1,47/49] cmd: bcm: add nitro image load commands [v1,48/49] cmd: bcm: add command for chimp hand shake [v1,49/49] board: ns3: check chimp handshake status

Commit Message

Rayagonda Kokatanur April 27, 2020, 10:51 a.m. UTC

Enable sp805 watchdog driver for ns3.

Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur at broadcom.com>
---
 configs/bcm_ns3_defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff mbox series

Patch

diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index 5ee5bea336..a3ba55d163 100644
--- a/configs/bcm_ns3_defconfig
+++ b/configs/bcm_ns3_defconfig
@@ -36,3 +36,6 @@  CONFIG_PINCTRL_SINGLE=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
 CONFIG_FAT_WRITE=y
+# CONFIG_WATCHDOG is not set
+CONFIG_WDT=y
+CONFIG_WDT_SP805=y