| Message ID | 20200111193639.19022-9-mrjoel@lixil.net |
|---|---|
| State | New |
| Headers | show |
| Series | [01/10] arm: mvebu: fix SerDes table alignment | expand |
On 11.01.20 20:36, Joel Johnson wrote: > Migrate the values for ENV_SIZE and ENV_OFFSET into board specific > Kconfig defaults so they're more accessible for configuration. > > Signed-off-by: Joel Johnson <mrjoel at lixil.net> The ENV macros have been moved to Kconfig in mainline. Please check and drop this patch or submit a necessary change if required. Thanks, Stefan > --- > > board/solidrun/clearfog/Kconfig | 8 ++++++++ > configs/clearfog_defconfig | 2 -- > 2 files changed, 8 insertions(+), 2 deletions(-) > > diff --git a/board/solidrun/clearfog/Kconfig b/board/solidrun/clearfog/Kconfig > index ce7fcf653f..253b925ba1 100644 > --- a/board/solidrun/clearfog/Kconfig > +++ b/board/solidrun/clearfog/Kconfig > @@ -37,6 +37,14 @@ config CLEARFOG_2GB_SOM > Enable support for the 2GB RAM SOM variant. If this option is not > enabled then the more common 1GB version will be used. > > +config ENV_SIZE > + hex "Environment Size" > + default 0x10000 > + > +config ENV_OFFSET > + hex "Environment offset" > + default 0xF0000 > + > config ENV_SECT_SIZE > hex "Environment Sector-Size" > # Use SPI flash erase block size of 4 KiB > diff --git a/configs/clearfog_defconfig b/configs/clearfog_defconfig > index 787c6360a7..0b55e63079 100644 > --- a/configs/clearfog_defconfig > +++ b/configs/clearfog_defconfig > @@ -11,8 +11,6 @@ CONFIG_TARGET_CLEARFOG=y > CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC=y > CONFIG_SPL_MMC_SUPPORT=y > CONFIG_SPL_SERIAL_SUPPORT=y > -CONFIG_ENV_SIZE=0x10000 > -CONFIG_ENV_OFFSET=0xF0000 > CONFIG_NR_DRAM_BANKS=2 > CONFIG_SPL=y > CONFIG_DEBUG_UART_BASE=0xd0012000 > Viele Grüße, Stefan
diff --git a/board/solidrun/clearfog/Kconfig b/board/solidrun/clearfog/Kconfig index ce7fcf653f..253b925ba1 100644 --- a/board/solidrun/clearfog/Kconfig +++ b/board/solidrun/clearfog/Kconfig @@ -37,6 +37,14 @@ config CLEARFOG_2GB_SOM Enable support for the 2GB RAM SOM variant. If this option is not enabled then the more common 1GB version will be used. +config ENV_SIZE + hex "Environment Size" + default 0x10000 + +config ENV_OFFSET + hex "Environment offset" + default 0xF0000 + config ENV_SECT_SIZE hex "Environment Sector-Size" # Use SPI flash erase block size of 4 KiB diff --git a/configs/clearfog_defconfig b/configs/clearfog_defconfig index 787c6360a7..0b55e63079 100644 --- a/configs/clearfog_defconfig +++ b/configs/clearfog_defconfig @@ -11,8 +11,6 @@ CONFIG_TARGET_CLEARFOG=y CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_ENV_SIZE=0x10000 -CONFIG_ENV_OFFSET=0xF0000 CONFIG_NR_DRAM_BANKS=2 CONFIG_SPL=y CONFIG_DEBUG_UART_BASE=0xd0012000
Migrate the values for ENV_SIZE and ENV_OFFSET into board specific Kconfig defaults so they're more accessible for configuration. Signed-off-by: Joel Johnson <mrjoel at lixil.net> --- board/solidrun/clearfog/Kconfig | 8 ++++++++ configs/clearfog_defconfig | 2 -- 2 files changed, 8 insertions(+), 2 deletions(-)