@@ -60,3 +60,4 @@ CONFIG_FASTBOOT_FLASH_MMC=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_FASTBOOT_BUF_ADDR=0x56000000
CONFIG_FASTBOOT_BUF_SIZE=0x1E00000
+CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT=y
\ No newline at end of file
@@ -104,6 +104,36 @@ config FASTBOOT_FLASH_NAND_TRIMFFS
When flashing NAND enable the DROP_FFS flag to drop trailing all-0xff
pages.
+config FASTBOOT_MMC_BOOT1_SUPPORT
+ bool "Enable EMMC_BOOT1 flash/erase"
+ depends on FASTBOOT_FLASH_MMC && EFI_PARTITION && ARCH_MEDIATEK
+ help
+ The fastboot "flash" and "erase" commands normally does operations
+ on EMMC userdata. Define this to enable the special commands to
+ flash/erase EMMC_BOOT1.
+ The default target name for updating EMMC_BOOT1 is "mmc0boot0".
+
+config FASTBOOT_MMC_BOOT1_NAME
+ string "Target name for updating EMMC_BOOT1"
+ depends on FASTBOOT_MMC_BOOT1_SUPPORT
+ default "mmc0boot0"
+ help
+ The fastboot "flash" and "erase" commands support operations on
+ EMMC_BOOT1. This occurs when the specified "EMMC_BOOT1 name" on
+ the "fastboot flash" and "fastboot erase" commands match the value
+ defined here.
+ The default target name for updating EMMC_BOOT1 is "mmc0boot0".
+
+config FASTBOOT_MMC_USER_NAME
+ string "Target name for erasing EMMC_USER"
+ depends on FASTBOOT_FLASH_MMC && EFI_PARTITION && ARCH_MEDIATEK
+ default "mmc0"
+ help
+ The fastboot "erase" command supports erasing EMMC_USER. This occurs
+ when the specified "EMMC_USER name" on the "fastboot erase" commands
+ match the value defined here.
+ The default target name for erasing EMMC_USER is "mmc0".
+
config FASTBOOT_GPT_NAME
string "Target name for updating GPT"
depends on FASTBOOT_FLASH_MMC && EFI_PARTITION
@@ -129,6 +129,76 @@ static void write_raw_image(struct blk_desc *dev_desc, disk_partition_t *info,
fastboot_okay(NULL, response);
}
+#ifdef CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT
+static int fb_mmc_erase_mmc_hwpart(struct blk_desc *dev_desc)
+{
+ lbaint_t blks;
+
+ debug("Start Erasing mmc hwpart[%u]...\n", dev_desc->hwpart);
+
+ blks = fb_mmc_blk_write(dev_desc, 0, dev_desc->lba, NULL);
+
+ if (blks != dev_desc->lba) {
+ pr_err("Failed to erase mmc hwpart[%u]\n", dev_desc->hwpart);
+ return 1;
+ }
+
+ printf("........ erased %lu bytes from mmc hwpart[%u]\n",
+ dev_desc->lba * dev_desc->blksz, dev_desc->hwpart);
+
+ return 0;
+}
+
+static void fb_mmc_boot1_ops(struct blk_desc *dev_desc, void *buffer,
+ u32 buff_sz, char *response)
+{
+ lbaint_t blkcnt;
+ lbaint_t blks;
+ unsigned long blksz;
+
+ // To operate on EMMC_BOOT1 (mmc0boot0), we first change the hwpart
+ if (blk_dselect_hwpart(dev_desc, 1)) {
+ pr_err("Failed to select hwpart\n");
+ fastboot_fail("Failed to select hwpart", response);
+ return;
+ }
+
+ if (buffer) { /* flash */
+
+ /* determine number of blocks to write */
+ blksz = dev_desc->blksz;
+ blkcnt = ((buff_sz + (blksz - 1)) & ~(blksz - 1));
+ blkcnt = lldiv(blkcnt, blksz);
+
+ if (blkcnt > dev_desc->lba) {
+ pr_err("Image size too large\n");
+ fastboot_fail("Image size too large", response);
+ return;
+ }
+
+ debug("Start Flashing Image to EMMC_BOOT1...\n");
+
+ blks = fb_mmc_blk_write(dev_desc, 0, blkcnt, buffer);
+
+ if (blks != blkcnt) {
+ pr_err("Failed to write EMMC_BOOT1\n");
+ fastboot_fail("Failed to write EMMC_BOOT1", response);
+ return;
+ }
+
+ printf("........ wrote %lu bytes to EMMC_BOOT1\n",
+ blkcnt * blksz);
+ } else { /* erase */
+ if (fb_mmc_erase_mmc_hwpart(dev_desc)) {
+ fastboot_fail("Failed to erase EMMC_BOOT1", response);
+ return;
+ }
+ }
+
+ fastboot_okay(NULL, response);
+}
+#endif
+
#ifdef CONFIG_ANDROID_BOOT_IMAGE
/**
* Read Android boot image header from boot partition.
@@ -345,8 +415,21 @@ void fastboot_mmc_flash_write(const char *cmd, void *download_buffer,
return;
}
+#ifdef CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT
+ if (strcmp(cmd, CONFIG_FASTBOOT_MMC_BOOT1_NAME) == 0) {
+ fb_mmc_boot1_ops(dev_desc, download_buffer,
+ download_bytes, response);
+ return;
+ }
+#endif
+
#if CONFIG_IS_ENABLED(EFI_PARTITION)
+#ifndef CONFIG_FASTBOOT_MMC_USER_NAME
if (strcmp(cmd, CONFIG_FASTBOOT_GPT_NAME) == 0) {
+#else
+ if (strcmp(cmd, CONFIG_FASTBOOT_GPT_NAME) == 0 ||
+ strcmp(cmd, CONFIG_FASTBOOT_MMC_USER_NAME) == 0) {
+#endif
printf("%s: updating MBR, Primary and Backup GPT(s)\n",
__func__);
if (is_valid_gpt_buf(dev_desc, download_buffer)) {
@@ -457,6 +540,25 @@ void fastboot_mmc_erase(const char *cmd, char *response)
return;
}
+#ifdef CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT
+ if (strcmp(cmd, CONFIG_FASTBOOT_MMC_BOOT1_NAME) == 0) {
+ /* erase EMMC boot1 */
+ fb_mmc_boot1_ops(dev_desc, NULL, 0, response);
+ return;
+ }
+#endif
+
+#ifdef CONFIG_FASTBOOT_MMC_USER_NAME
+ if (strcmp(cmd, CONFIG_FASTBOOT_MMC_USER_NAME) == 0) {
+ /* erase EMMC userdata */
+ if (fb_mmc_erase_mmc_hwpart(dev_desc))
+ fastboot_fail("Failed to erase EMMC_USER", response);
+ else
+ fastboot_okay(NULL, response);
+ return;
+ }
+#endif
+
ret = part_get_info_by_name_or_alias(dev_desc, cmd, &info);
if (ret < 0) {
pr_err("cannot find partition: '%s'\n", cmd);
This patch includes the following: 1. Add fastboot command to erase the whole EMMC_USER 2. Add fastboot command to flash image at EMMC_BOOT1 3. Add fastboot command to erase the whole EMMC_BOOT1 4. Enale CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT for mt8518 Signed-off-by: mingming lee <mingming.lee at mediatek.com> --- Changes for v2: - Limit the config in this patch depends on ARCH_MEDIATEK - config include all the added function,avoid affect other IC config --- configs/mt8518_ap1_emmc_defconfig | 1 + drivers/fastboot/Kconfig | 30 +++++++++ drivers/fastboot/fb_mmc.c | 102 ++++++++++++++++++++++++++++++ 3 files changed, 133 insertions(+)