diff mbox series

[v4,05/10] armv7R: K3: Add support for jumping to firmware

Message ID 20200122040005.7573-6-j-keerthy@ti.com
State Superseded
Headers show
Series Add support for loading main_r5fss0_core0 | expand

Commit Message

J, KEERTHY Jan. 22, 2020, 4 a.m. UTC
MCU Domain rf50 is currently shutting down after loading the ATF.
Load elf firmware and jump to firmware post loading ATF.

ROM doesn't enable ATCM memory, so make sure that firmware that
is being loaded doesn't use ATCM memory or override SPL.

Signed-off-by: Keerthy <j-keerthy at ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---

Changes in v4:

  * Env variable names changed.

 arch/arm/mach-k3/common.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c
index f0ac0c39f1..675a9dc4f7 100644
--- a/arch/arm/mach-k3/common.c
+++ b/arch/arm/mach-k3/common.c
@@ -131,8 +131,10 @@  __weak void start_non_linux_remote_cores(void)
 
 void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
 {
+	typedef void __noreturn (*image_entry_noargs_t)(void);
 	struct ti_sci_handle *ti_sci = get_ti_sci_handle();
-	int ret;
+	u32 loadaddr = 0;
+	int ret, size;
 
 	/* Release all the exclusive devices held by SPL before starting ATF */
 	ti_sci->ops.dev_ops.release_exclusive_devices(ti_sci);
@@ -143,6 +145,9 @@  void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
 
 	init_env();
 	start_non_linux_remote_cores();
+	size = load_firmware("name_mcur5f0_0fw", "addr_mcur5f0_0load",
+			     &loadaddr);
+
 
 	/*
 	 * It is assumed that remoteproc device 1 is the corresponding
@@ -158,13 +163,18 @@  void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
 	ret = rproc_start(1);
 	if (ret)
 		panic("%s: ATF failed to start on rproc (%d)\n", __func__, ret);
+	if (!(size > 0 && valid_elf_image(loadaddr))) {
+		debug("Shutting down...\n");
+		release_resources_for_core_shutdown();
+
+		while (1)
+			asm volatile("wfe");
+	}
 
-	debug("Releasing resources...\n");
-	release_resources_for_core_shutdown();
+	image_entry_noargs_t image_entry =
+		(image_entry_noargs_t)load_elf_image_phdr(loadaddr);
 
-	debug("Finalizing core shutdown...\n");
-	while (1)
-		asm volatile("wfe");
+	image_entry();
 }
 #endif