diff mbox series

[v2,06/10] mmc: am654_sdhci: Implement workaround for card detect

Message ID 20200124115252.15712-7-faiz_abbas@ti.com
State New
Headers show
Series Add Support for eMMC boot in AM65x and J721e | expand

Commit Message

Faiz Abbas Jan. 24, 2020, 11:52 a.m. UTC
The 4 bit MMC controllers have an internal debounce for the SDCD line
with a debounce delay of 1 second. Therefore, after clocks to the IP are
enabled, software has to wait for this time before it can power on the
controller.

Add an init() callback which polls on sdcd for a maximum of 2 seconds
before switching on power to the controller or (in the case of no card)
returning a ENOMEDIUM. This pushes the 1 second wait time to when the
card is actually needed rather than at every probe() making sure that
users who don't insert an SD card in the slot don't have to wait such a
long time.

Signed-off-by: Faiz Abbas <faiz_abbas at ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---
 drivers/mmc/am654_sdhci.c | 35 ++++++++++++++++++++++++++++++++---
 1 file changed, 32 insertions(+), 3 deletions(-)

Comments

Simon Goldschmidt Jan. 29, 2020, 2:18 p.m. UTC | #1
On Fri, Jan 24, 2020 at 12:52 PM Faiz Abbas <faiz_abbas at ti.com> wrote:
>
> The 4 bit MMC controllers have an internal debounce for the SDCD line
> with a debounce delay of 1 second. Therefore, after clocks to the IP are
> enabled, software has to wait for this time before it can power on the
> controller.
>
> Add an init() callback which polls on sdcd for a maximum of 2 seconds
> before switching on power to the controller or (in the case of no card)
> returning a ENOMEDIUM. This pushes the 1 second wait time to when the
> card is actually needed rather than at every probe() making sure that
> users who don't insert an SD card in the slot don't have to wait such a
> long time.
>
> Signed-off-by: Faiz Abbas <faiz_abbas at ti.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
> ---
>  drivers/mmc/am654_sdhci.c | 35 ++++++++++++++++++++++++++++++++---
>  1 file changed, 32 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mmc/am654_sdhci.c b/drivers/mmc/am654_sdhci.c
> index ff0a81eaab..ccae3fea31 100644
> --- a/drivers/mmc/am654_sdhci.c
> +++ b/drivers/mmc/am654_sdhci.c
> @@ -254,7 +254,7 @@ const struct am654_driver_data j721e_4bit_drv_data = {
>         .flags = IOMUX_PRESENT,
>  };
>
> -int am654_sdhci_init(struct am654_sdhci_plat *plat)
> +int am654_sdhci_init_phy(struct am654_sdhci_plat *plat)
>  {
>         u32 ctl_cfg_2 = 0;
>         u32 mask, val;
> @@ -331,8 +331,37 @@ static int sdhci_am654_get_otap_delay(struct udevice *dev,
>         return 0;
>  }
>
> +#define MAX_SDCD_DEBOUNCE_TIME 2000
> +int am654_sdhci_init(struct udevice *dev)
> +{
> +       struct am654_sdhci_plat *plat = dev_get_platdata(dev);
> +       struct mmc *mmc = mmc_get_mmc_dev(dev);
> +       struct sdhci_host *host = mmc->priv;
> +       unsigned long start;
> +       int val;
> +
> +       /*
> +        * The controller takes about 1 second to debounce the card detect line
> +        * and doesn't let us power on until that time is up. Instead of waiting
> +        * for 1 second at every stage, poll on the CARD_PRESENT bit upto a
> +        * maximum of 2 seconds to be safe..
> +        */
> +       start = get_timer(0);
> +       do {
> +               if (get_timer(start) > MAX_SDCD_DEBOUNCE_TIME)
> +                       return -ENOMEDIUM;
> +
> +               val = mmc_getcd(host->mmc);
> +       } while (!val);
> +
> +       am654_sdhci_init_phy(plat);
> +
> +       return sdhci_init(mmc);
> +}
> +
>  static int am654_sdhci_probe(struct udevice *dev)
>  {
> +       struct dm_mmc_ops *ops = mmc_get_ops(dev);
>         struct am654_driver_data *drv_data =
>                         (struct am654_driver_data *)dev_get_driver_data(dev);
>         struct am654_sdhci_plat *plat = dev_get_platdata(dev);
> @@ -373,9 +402,9 @@ static int am654_sdhci_probe(struct udevice *dev)
>
>         regmap_init_mem_index(dev_ofnode(dev), &plat->base, 1);
>
> -       am654_sdhci_init(plat);
> +       ops->init = am654_sdhci_init;

Is this a valid approach? I mean, many drivers create their 'ops' const like
this:
   static const struct ram_ops altera_gen5_sdram_ops (...)

That would mean you write to a const region. I know the U-Boot sources make
this easy for you by providing the ops non-const via mmc_get_ops, but I still
think this is not good.

Regards,
Simon

>
> -       return sdhci_probe(dev);
> +       return 0;
>  }
>
>  static int am654_sdhci_ofdata_to_platdata(struct udevice *dev)
> --
> 2.19.2
>
diff mbox series

Patch

diff --git a/drivers/mmc/am654_sdhci.c b/drivers/mmc/am654_sdhci.c
index ff0a81eaab..ccae3fea31 100644
--- a/drivers/mmc/am654_sdhci.c
+++ b/drivers/mmc/am654_sdhci.c
@@ -254,7 +254,7 @@  const struct am654_driver_data j721e_4bit_drv_data = {
 	.flags = IOMUX_PRESENT,
 };
 
-int am654_sdhci_init(struct am654_sdhci_plat *plat)
+int am654_sdhci_init_phy(struct am654_sdhci_plat *plat)
 {
 	u32 ctl_cfg_2 = 0;
 	u32 mask, val;
@@ -331,8 +331,37 @@  static int sdhci_am654_get_otap_delay(struct udevice *dev,
 	return 0;
 }
 
+#define MAX_SDCD_DEBOUNCE_TIME 2000
+int am654_sdhci_init(struct udevice *dev)
+{
+	struct am654_sdhci_plat *plat = dev_get_platdata(dev);
+	struct mmc *mmc = mmc_get_mmc_dev(dev);
+	struct sdhci_host *host = mmc->priv;
+	unsigned long start;
+	int val;
+
+	/*
+	 * The controller takes about 1 second to debounce the card detect line
+	 * and doesn't let us power on until that time is up. Instead of waiting
+	 * for 1 second at every stage, poll on the CARD_PRESENT bit upto a
+	 * maximum of 2 seconds to be safe..
+	 */
+	start = get_timer(0);
+	do {
+		if (get_timer(start) > MAX_SDCD_DEBOUNCE_TIME)
+			return -ENOMEDIUM;
+
+		val = mmc_getcd(host->mmc);
+	} while (!val);
+
+	am654_sdhci_init_phy(plat);
+
+	return sdhci_init(mmc);
+}
+
 static int am654_sdhci_probe(struct udevice *dev)
 {
+	struct dm_mmc_ops *ops = mmc_get_ops(dev);
 	struct am654_driver_data *drv_data =
 			(struct am654_driver_data *)dev_get_driver_data(dev);
 	struct am654_sdhci_plat *plat = dev_get_platdata(dev);
@@ -373,9 +402,9 @@  static int am654_sdhci_probe(struct udevice *dev)
 
 	regmap_init_mem_index(dev_ofnode(dev), &plat->base, 1);
 
-	am654_sdhci_init(plat);
+	ops->init = am654_sdhci_init;
 
-	return sdhci_probe(dev);
+	return 0;
 }
 
 static int am654_sdhci_ofdata_to_platdata(struct udevice *dev)