diff mbox series

[2/4] ARM: uniphier: remove adhoc reset deassertion for the NAND controller

Message ID 20200127165455.31753-2-yamada.masahiro@socionext.com
State Superseded
Headers show
Series [1/4] mtd: rawnand: denali_dt: insert udelay() after reset deassert | expand

Commit Message

Masahiro Yamada Jan. 27, 2020, 4:54 p.m. UTC
Now that the reset controlling of the Denali NAND driver (denali_dt.c)
works for this platform, remove the adhoc reset deassert code.

Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---

 arch/arm/mach-uniphier/board_init.c   |  2 --
 arch/arm/mach-uniphier/clk/Makefile   |  4 ++--
 arch/arm/mach-uniphier/clk/clk-ld4.c  | 32 ---------------------------
 arch/arm/mach-uniphier/clk/clk-pro4.c |  8 +------
 arch/arm/mach-uniphier/clk/clk-pro5.c | 14 ++----------
 arch/arm/mach-uniphier/clk/clk-pxs2.c | 14 ++----------
 6 files changed, 7 insertions(+), 67 deletions(-)
 delete mode 100644 arch/arm/mach-uniphier/clk/clk-ld4.c
diff mbox series

Patch

diff --git a/arch/arm/mach-uniphier/board_init.c b/arch/arm/mach-uniphier/board_init.c
index 7535f91528..99727a3004 100644
--- a/arch/arm/mach-uniphier/board_init.c
+++ b/arch/arm/mach-uniphier/board_init.c
@@ -40,7 +40,6 @@  static const struct uniphier_initdata uniphier_initdata[] = {
 		.soc_id = UNIPHIER_LD4_ID,
 		.sbc_init = uniphier_ld4_sbc_init,
 		.pll_init = uniphier_ld4_pll_init,
-		.clk_init = uniphier_ld4_clk_init,
 	},
 #endif
 #if defined(CONFIG_ARCH_UNIPHIER_PRO4)
@@ -56,7 +55,6 @@  static const struct uniphier_initdata uniphier_initdata[] = {
 		.soc_id = UNIPHIER_SLD8_ID,
 		.sbc_init = uniphier_ld4_sbc_init,
 		.pll_init = uniphier_ld4_pll_init,
-		.clk_init = uniphier_ld4_clk_init,
 	},
 #endif
 #if defined(CONFIG_ARCH_UNIPHIER_PRO5)
diff --git a/arch/arm/mach-uniphier/clk/Makefile b/arch/arm/mach-uniphier/clk/Makefile
index d12f49e523..c49e44754c 100644
--- a/arch/arm/mach-uniphier/clk/Makefile
+++ b/arch/arm/mach-uniphier/clk/Makefile
@@ -11,9 +11,9 @@  obj-$(CONFIG_ARCH_UNIPHIER_LD6B)	+= clk-early-ld4.o clk-dram-pxs2.o dpll-pxs2.o
 
 else
 
-obj-$(CONFIG_ARCH_UNIPHIER_LD4)		+= clk-ld4.o pll-ld4.o dpll-tail.o
+obj-$(CONFIG_ARCH_UNIPHIER_LD4)		+= pll-ld4.o dpll-tail.o
 obj-$(CONFIG_ARCH_UNIPHIER_PRO4)	+= clk-pro4.o pll-pro4.o dpll-tail.o
-obj-$(CONFIG_ARCH_UNIPHIER_SLD8)	+= clk-ld4.o pll-ld4.o dpll-tail.o
+obj-$(CONFIG_ARCH_UNIPHIER_SLD8)	+= pll-ld4.o dpll-tail.o
 obj-$(CONFIG_ARCH_UNIPHIER_PRO5)	+= clk-pro5.o
 obj-$(CONFIG_ARCH_UNIPHIER_PXS2)	+= clk-pxs2.o
 obj-$(CONFIG_ARCH_UNIPHIER_LD6B)	+= clk-pxs2.o
diff --git a/arch/arm/mach-uniphier/clk/clk-ld4.c b/arch/arm/mach-uniphier/clk/clk-ld4.c
deleted file mode 100644
index 0393942503..0000000000
--- a/arch/arm/mach-uniphier/clk/clk-ld4.c
+++ /dev/null
@@ -1,32 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2011-2015 Panasonic Corporation
- * Copyright (C) 2015-2016 Socionext Inc.
- *   Author: Masahiro Yamada <yamada.masahiro at socionext.com>
- */
-
-#include <linux/io.h>
-
-#include "../init.h"
-#include "../sc-regs.h"
-
-void uniphier_ld4_clk_init(void)
-{
-	u32 tmp;
-
-	/* deassert reset */
-	tmp = readl(sc_base + SC_RSTCTRL);
-#ifdef CONFIG_NAND_DENALI
-	tmp |= SC_RSTCTRL_NRST_NAND;
-#endif
-	writel(tmp, sc_base + SC_RSTCTRL);
-	readl(sc_base + SC_RSTCTRL); /* dummy read */
-
-	/* provide clocks */
-	tmp = readl(sc_base + SC_CLKCTRL);
-#ifdef CONFIG_NAND_DENALI
-	tmp |= SC_CLKCTRL_CEN_NAND;
-#endif
-	writel(tmp, sc_base + SC_CLKCTRL);
-	readl(sc_base + SC_CLKCTRL); /* dummy read */
-}
diff --git a/arch/arm/mach-uniphier/clk/clk-pro4.c b/arch/arm/mach-uniphier/clk/clk-pro4.c
index 2b364dca41..7b2d502f4f 100644
--- a/arch/arm/mach-uniphier/clk/clk-pro4.c
+++ b/arch/arm/mach-uniphier/clk/clk-pro4.c
@@ -12,16 +12,13 @@ 
 
 void uniphier_pro4_clk_init(void)
 {
+#ifdef CONFIG_USB_DWC3_UNIPHIER
 	u32 tmp;
 
 	/* deassert reset */
 	tmp = readl(sc_base + SC_RSTCTRL);
-#ifdef CONFIG_USB_DWC3_UNIPHIER
 	tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_USB3C0 |
 		SC_RSTCTRL_NRST_GIO;
-#endif
-#ifdef CONFIG_NAND_DENALI
-	tmp |= SC_RSTCTRL_NRST_NAND;
 #endif
 	writel(tmp, sc_base + SC_RSTCTRL);
 	readl(sc_base + SC_RSTCTRL); /* dummy read */
@@ -38,9 +35,6 @@  void uniphier_pro4_clk_init(void)
 #ifdef CONFIG_USB_DWC3_UNIPHIER
 	tmp |= SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 |
 		SC_CLKCTRL_CEN_GIO;
-#endif
-#ifdef CONFIG_NAND_DENALI
-	tmp |= SC_CLKCTRL_CEN_NAND;
 #endif
 	writel(tmp, sc_base + SC_CLKCTRL);
 	readl(sc_base + SC_CLKCTRL); /* dummy read */
diff --git a/arch/arm/mach-uniphier/clk/clk-pro5.c b/arch/arm/mach-uniphier/clk/clk-pro5.c
index 874964b2d5..36006fd256 100644
--- a/arch/arm/mach-uniphier/clk/clk-pro5.c
+++ b/arch/arm/mach-uniphier/clk/clk-pro5.c
@@ -10,35 +10,25 @@ 
 
 void uniphier_pro5_clk_init(void)
 {
+#ifdef CONFIG_USB_DWC3_UNIPHIER
 	u32 tmp;
 
 	/* deassert reset */
 	tmp = readl(sc_base + SC_RSTCTRL);
-#ifdef CONFIG_USB_DWC3_UNIPHIER
 	tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_GIO;
-#endif
-#ifdef CONFIG_NAND_DENALI
-	tmp |= SC_RSTCTRL_NRST_NAND;
-#endif
 	writel(tmp, sc_base + SC_RSTCTRL);
 	readl(sc_base + SC_RSTCTRL); /* dummy read */
 
-#ifdef CONFIG_USB_DWC3_UNIPHIER
 	tmp = readl(sc_base + SC_RSTCTRL2);
 	tmp |= SC_RSTCTRL2_NRST_USB3B1;
 	writel(tmp, sc_base + SC_RSTCTRL2);
 	readl(sc_base + SC_RSTCTRL2); /* dummy read */
-#endif
 
 	/* provide clocks */
 	tmp = readl(sc_base + SC_CLKCTRL);
-#ifdef CONFIG_USB_DWC3_UNIPHIER
 	tmp |= SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 |
 		SC_CLKCTRL_CEN_GIO;
-#endif
-#ifdef CONFIG_NAND_DENALI
-	tmp |= SC_CLKCTRL_CEN_NAND;
-#endif
 	writel(tmp, sc_base + SC_CLKCTRL);
 	readl(sc_base + SC_CLKCTRL); /* dummy read */
+#endif
 }
diff --git a/arch/arm/mach-uniphier/clk/clk-pxs2.c b/arch/arm/mach-uniphier/clk/clk-pxs2.c
index 8cb4f87ae5..c2a75ce000 100644
--- a/arch/arm/mach-uniphier/clk/clk-pxs2.c
+++ b/arch/arm/mach-uniphier/clk/clk-pxs2.c
@@ -11,20 +11,15 @@ 
 
 void uniphier_pxs2_clk_init(void)
 {
+#ifdef CONFIG_USB_DWC3_UNIPHIER
 	u32 tmp;
 
 	/* deassert reset */
 	tmp = readl(sc_base + SC_RSTCTRL);
-#ifdef CONFIG_USB_DWC3_UNIPHIER
 	tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_GIO;
-#endif
-#ifdef CONFIG_NAND_DENALI
-	tmp |= SC_RSTCTRL_NRST_NAND;
-#endif
 	writel(tmp, sc_base + SC_RSTCTRL);
 	readl(sc_base + SC_RSTCTRL); /* dummy read */
 
-#ifdef CONFIG_USB_DWC3_UNIPHIER
 	tmp = readl(sc_base + SC_RSTCTRL2);
 	tmp |= SC_RSTCTRL2_NRST_USB3B1;
 	writel(tmp, sc_base + SC_RSTCTRL2);
@@ -33,17 +28,12 @@  void uniphier_pxs2_clk_init(void)
 	tmp = readl(sc_base + SC_RSTCTRL6);
 	tmp |= 0x37;
 	writel(tmp, sc_base + SC_RSTCTRL6);
-#endif
 
 	/* provide clocks */
 	tmp = readl(sc_base + SC_CLKCTRL);
-#ifdef CONFIG_USB_DWC3_UNIPHIER
 	tmp |= BIT(20) | BIT(19) | SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 |
 		SC_CLKCTRL_CEN_GIO;
-#endif
-#ifdef CONFIG_NAND_DENALI
-	tmp |= SC_CLKCTRL_CEN_NAND;
-#endif
 	writel(tmp, sc_base + SC_CLKCTRL);
 	readl(sc_base + SC_CLKCTRL); /* dummy read */
+#endif
 }