diff mbox series

[v4,1/4] Makefile: Drop to handle rkspi image type

Message ID 20200608181708.17842-2-jagan@amarulasolutions.com
State Accepted
Commit f6f9affdcea058bec6004895ab427a4ecda775b2
Headers show
Series rockchip: rk3399: Add SPI boot | expand

Commit Message

Jagan Teki June 8, 2020, 6:17 p.m. UTC
On rockchip platforms, SPI boot image creation is not
straightforward like MMC boot image creation where former
requires to specify tpl, spl in multimage format in mkimage,
and later simply do a concatenate mkimaged-tpl with spl.

On this note, let drop rkspi image type creation via kbuild
and let inform via rockchip.rst

Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Changes for v4:
- none

 Makefile | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/Makefile b/Makefile
index 3851dd9fa0..db3b6b9991 100644
--- a/Makefile
+++ b/Makefile
@@ -1438,22 +1438,15 @@  u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
 
 ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
 
-# rockchip image type
-ifeq ($(CONFIG_SPL_SPI_LOAD),y)
-ROCKCHIP_IMG_TYPE := rkspi
-else
-ROCKCHIP_IMG_TYPE := rksd
-endif
-
 # TPL + SPL
 ifeq ($(CONFIG_SPL)$(CONFIG_TPL),yy)
-MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE)
+MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T rksd
 tpl/u-boot-tpl-rockchip.bin: tpl/u-boot-tpl.bin FORCE
 	$(call if_changed,mkimage)
 idbloader.img: tpl/u-boot-tpl-rockchip.bin spl/u-boot-spl.bin FORCE
 	$(call if_changed,cat)
 else
-MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE)
+MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T rksd
 idbloader.img: spl/u-boot-spl.bin FORCE
 	$(call if_changed,mkimage)
 endif