diff mbox series

[v2] ARM: dts: imx6q-tbs2910: Fix Ethernet regression

Message ID 20200625111457.9285-1-festevam@gmail.com
State Accepted
Commit 4b78b5bfdae8d655924d01aa332ea179c2885c62
Headers show
Series [v2] ARM: dts: imx6q-tbs2910: Fix Ethernet regression | expand

Commit Message

Fabio Estevam June 25, 2020, 11:14 a.m. UTC
Since commit:

commit 6333cbb3817ed551cd7d4e92f7359c73ccc567fc
Author: Michael Walle <michael at walle.cc>
Date:   Thu May 7 00:11:58 2020 +0200

    phy: atheros: ar8035: remove static clock config

    We can configure the clock output in the device tree. Disable the
    hardcoded one in here. This is highly board-specific and should have
    never been enabled in the PHY driver.

    If bisecting shows that this commit breaks your board it probably
    depends on the clock output of your Atheros AR8035 PHY. Please have a
    look at doc/device-tree-bindings/net/phy/atheros.txt. You need to set
    "clk-out-frequency = <125000000>" because that value was the hardcoded
    value until this commit.

    Signed-off-by: Michael Walle <michael at walle.cc>
    Acked-by: Joe Hershberger <joe.hershberger at ni.com>

, the clock output setting for the AR803x driver is removed from being 
hardcoded in the PHY driver and should be passed via device tree instead.

Update the device tree with the "qca,clk-out-frequency" property so that
Ethernet can work again.

Reported-by: Soeren Moch <smoch at web.de>
Signed-off-by: Fabio Estevam <festevam at gmail.com>
---
Changes since v1:
- Removed extra unnecessary extra blank line from device tree.

 arch/arm/dts/imx6q-tbs2910.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

Comments

Soeren Moch June 25, 2020, 1:52 p.m. UTC | #1
On 25.06.20 13:14, Fabio Estevam wrote:
> Since commit:
>
> commit 6333cbb3817ed551cd7d4e92f7359c73ccc567fc
> Author: Michael Walle <michael at walle.cc>
> Date:   Thu May 7 00:11:58 2020 +0200
>
>     phy: atheros: ar8035: remove static clock config
>
>     We can configure the clock output in the device tree. Disable the
>     hardcoded one in here. This is highly board-specific and should have
>     never been enabled in the PHY driver.
>
>     If bisecting shows that this commit breaks your board it probably
>     depends on the clock output of your Atheros AR8035 PHY. Please have a
>     look at doc/device-tree-bindings/net/phy/atheros.txt. You need to set
>     "clk-out-frequency = <125000000>" because that value was the hardcoded
>     value until this commit.
>
>     Signed-off-by: Michael Walle <michael at walle.cc>
>     Acked-by: Joe Hershberger <joe.hershberger at ni.com>
>
> , the clock output setting for the AR803x driver is removed from being
> hardcoded in the PHY driver and should be passed via device tree instead.
>
> Update the device tree with the "qca,clk-out-frequency" property so that
> Ethernet can work again.
>
> Reported-by: Soeren Moch <smoch at web.de>
> Signed-off-by: Fabio Estevam <festevam at gmail.com>
Tested-by: Soeren Moch <smoch at web.de>

Thanks,
Soeren
> ---
> Changes since v1:
> - Removed extra unnecessary extra blank line from device tree.
>
>  arch/arm/dts/imx6q-tbs2910.dts | 11 +++++++++++
>  1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/dts/imx6q-tbs2910.dts b/arch/arm/dts/imx6q-tbs2910.dts
> index cc5df37b46..7d0a0676ff 100644
> --- a/arch/arm/dts/imx6q-tbs2910.dts
> +++ b/arch/arm/dts/imx6q-tbs2910.dts
> @@ -107,7 +107,18 @@
>  	pinctrl-0 = <&pinctrl_enet>;
>  	phy-mode = "rgmii-id";
>  	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
> +	phy-handle = <&phy>;
>  	status = "okay";
> +
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		phy: ethernet-phy at 4 {
> +			reg = <4>;
> +			qca,clk-out-frequency = <125000000>;
> +		};
> +	};
>  };
>
>  &hdmi {
Fabio Estevam June 25, 2020, 1:55 p.m. UTC | #2
Hi Tom,

On Thu, Jun 25, 2020 at 10:52 AM Soeren Moch <smoch at web.de> wrote:
>
> On 25.06.20 13:14, Fabio Estevam wrote:
> > Since commit:
> >
> > commit 6333cbb3817ed551cd7d4e92f7359c73ccc567fc
> > Author: Michael Walle <michael at walle.cc>
> > Date:   Thu May 7 00:11:58 2020 +0200
> >
> >     phy: atheros: ar8035: remove static clock config
> >
> >     We can configure the clock output in the device tree. Disable the
> >     hardcoded one in here. This is highly board-specific and should have
> >     never been enabled in the PHY driver.
> >
> >     If bisecting shows that this commit breaks your board it probably
> >     depends on the clock output of your Atheros AR8035 PHY. Please have a
> >     look at doc/device-tree-bindings/net/phy/atheros.txt. You need to set
> >     "clk-out-frequency = <125000000>" because that value was the hardcoded
> >     value until this commit.
> >
> >     Signed-off-by: Michael Walle <michael at walle.cc>
> >     Acked-by: Joe Hershberger <joe.hershberger at ni.com>
> >
> > , the clock output setting for the AR803x driver is removed from being
> > hardcoded in the PHY driver and should be passed via device tree instead.
> >
> > Update the device tree with the "qca,clk-out-frequency" property so that
> > Ethernet can work again.
> >
> > Reported-by: Soeren Moch <smoch at web.de>
> > Signed-off-by: Fabio Estevam <festevam at gmail.com>
> Tested-by: Soeren Moch <smoch at web.de>

My understanding is that Stefano does not have any other pull requests
for 2020.07.

In this case, could you apply this regression fix directly?

Thanks
Stefano Babic June 25, 2020, 2:18 p.m. UTC | #3
On 25.06.20 15:55, Fabio Estevam wrote:
> Hi Tom,
> 
> On Thu, Jun 25, 2020 at 10:52 AM Soeren Moch <smoch at web.de> wrote:
>>
>> On 25.06.20 13:14, Fabio Estevam wrote:
>>> Since commit:
>>>
>>> commit 6333cbb3817ed551cd7d4e92f7359c73ccc567fc
>>> Author: Michael Walle <michael at walle.cc>
>>> Date:   Thu May 7 00:11:58 2020 +0200
>>>
>>>     phy: atheros: ar8035: remove static clock config
>>>
>>>     We can configure the clock output in the device tree. Disable the
>>>     hardcoded one in here. This is highly board-specific and should have
>>>     never been enabled in the PHY driver.
>>>
>>>     If bisecting shows that this commit breaks your board it probably
>>>     depends on the clock output of your Atheros AR8035 PHY. Please have a
>>>     look at doc/device-tree-bindings/net/phy/atheros.txt. You need to set
>>>     "clk-out-frequency = <125000000>" because that value was the hardcoded
>>>     value until this commit.
>>>
>>>     Signed-off-by: Michael Walle <michael at walle.cc>
>>>     Acked-by: Joe Hershberger <joe.hershberger at ni.com>
>>>
>>> , the clock output setting for the AR803x driver is removed from being
>>> hardcoded in the PHY driver and should be passed via device tree instead.
>>>
>>> Update the device tree with the "qca,clk-out-frequency" property so that
>>> Ethernet can work again.
>>>
>>> Reported-by: Soeren Moch <smoch at web.de>
>>> Signed-off-by: Fabio Estevam <festevam at gmail.com>
>> Tested-by: Soeren Moch <smoch at web.de>
> 
> My understanding is that Stefano does not have any other pull requests
> for 2020.07.
> 

Yes, I do not see (this is an exception) other urgent patches that
should flow into the release.

> In this case, could you apply this regression fix directly?
> 

+1

Thanks,
Stefano

> Thanks
>
Tom Rini June 25, 2020, 2:31 p.m. UTC | #4
On Thu, Jun 25, 2020 at 04:18:00PM +0200, Stefano Babic wrote:
> On 25.06.20 15:55, Fabio Estevam wrote:
> > Hi Tom,
> > 
> > On Thu, Jun 25, 2020 at 10:52 AM Soeren Moch <smoch at web.de> wrote:
> >>
> >> On 25.06.20 13:14, Fabio Estevam wrote:
> >>> Since commit:
> >>>
> >>> commit 6333cbb3817ed551cd7d4e92f7359c73ccc567fc
> >>> Author: Michael Walle <michael at walle.cc>
> >>> Date:   Thu May 7 00:11:58 2020 +0200
> >>>
> >>>     phy: atheros: ar8035: remove static clock config
> >>>
> >>>     We can configure the clock output in the device tree. Disable the
> >>>     hardcoded one in here. This is highly board-specific and should have
> >>>     never been enabled in the PHY driver.
> >>>
> >>>     If bisecting shows that this commit breaks your board it probably
> >>>     depends on the clock output of your Atheros AR8035 PHY. Please have a
> >>>     look at doc/device-tree-bindings/net/phy/atheros.txt. You need to set
> >>>     "clk-out-frequency = <125000000>" because that value was the hardcoded
> >>>     value until this commit.
> >>>
> >>>     Signed-off-by: Michael Walle <michael at walle.cc>
> >>>     Acked-by: Joe Hershberger <joe.hershberger at ni.com>
> >>>
> >>> , the clock output setting for the AR803x driver is removed from being
> >>> hardcoded in the PHY driver and should be passed via device tree instead.
> >>>
> >>> Update the device tree with the "qca,clk-out-frequency" property so that
> >>> Ethernet can work again.
> >>>
> >>> Reported-by: Soeren Moch <smoch at web.de>
> >>> Signed-off-by: Fabio Estevam <festevam at gmail.com>
> >> Tested-by: Soeren Moch <smoch at web.de>
> > 
> > My understanding is that Stefano does not have any other pull requests
> > for 2020.07.
> > 
> 
> Yes, I do not see (this is an exception) other urgent patches that
> should flow into the release.
> 
> > In this case, could you apply this regression fix directly?
> > 
> 
> +1

OK, will do, thanks for sorting this out so quickly!
Tom Rini June 25, 2020, 10:14 p.m. UTC | #5
On Thu, Jun 25, 2020 at 08:14:57AM -0300, Fabio Estevam wrote:

> Since commit:
> 
> commit 6333cbb3817ed551cd7d4e92f7359c73ccc567fc
> Author: Michael Walle <michael at walle.cc>
> Date:   Thu May 7 00:11:58 2020 +0200
> 
>     phy: atheros: ar8035: remove static clock config
> 
>     We can configure the clock output in the device tree. Disable the
>     hardcoded one in here. This is highly board-specific and should have
>     never been enabled in the PHY driver.
> 
>     If bisecting shows that this commit breaks your board it probably
>     depends on the clock output of your Atheros AR8035 PHY. Please have a
>     look at doc/device-tree-bindings/net/phy/atheros.txt. You need to set
>     "clk-out-frequency = <125000000>" because that value was the hardcoded
>     value until this commit.
> 
>     Signed-off-by: Michael Walle <michael at walle.cc>
>     Acked-by: Joe Hershberger <joe.hershberger at ni.com>
> 
> , the clock output setting for the AR803x driver is removed from being 
> hardcoded in the PHY driver and should be passed via device tree instead.
> 
> Update the device tree with the "qca,clk-out-frequency" property so that
> Ethernet can work again.
> 
> Reported-by: Soeren Moch <smoch at web.de>
> Signed-off-by: Fabio Estevam <festevam at gmail.com>
> Tested-by: Soeren Moch <smoch at web.de>

Applied to u-boot/master, thanks!
diff mbox series

Patch

diff --git a/arch/arm/dts/imx6q-tbs2910.dts b/arch/arm/dts/imx6q-tbs2910.dts
index cc5df37b46..7d0a0676ff 100644
--- a/arch/arm/dts/imx6q-tbs2910.dts
+++ b/arch/arm/dts/imx6q-tbs2910.dts
@@ -107,7 +107,18 @@ 
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	phy-handle = <&phy>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy at 4 {
+			reg = <4>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
 };
 
 &hdmi {