diff mbox series

[v2,3/5] fu540: dtsi: add reset producer and consumer entries

Message ID 1593087941-16872-4-git-send-email-sagar.kadam@sifive.com
State New
Headers show
Series add DM based reset driver for SiFive SoC's | expand

Commit Message

Sagar Shrikant Kadam June 25, 2020, 12:25 p.m. UTC
The resets to DDR and ethernet sub-system are connected to
PRCI device reset control register, these reset signals
are active low and are held low at power-up. Add these reset
producer and consumer details needed by the reset driver.

Signed-off-by: Sagar Shrikant Kadam <sagar.kadam at sifive.com>
Reviewed-by: Pragnesh Patel <Pragnesh.patel at sifive.com>
Reviewed-by: Bin Meng <bin.meng at windriver.com>
---
 arch/riscv/dts/fu540-c000-u-boot.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/arch/riscv/dts/fu540-c000-u-boot.dtsi b/arch/riscv/dts/fu540-c000-u-boot.dtsi
index 9bba554..b37241e 100644
--- a/arch/riscv/dts/fu540-c000-u-boot.dtsi
+++ b/arch/riscv/dts/fu540-c000-u-boot.dtsi
@@ -59,6 +59,16 @@ 
 			reg = <0x0 0x2000000 0x0 0xc0000>;
 			u-boot,dm-spl;
 		};
+		prci: clock-controller at 10000000 {
+			#reset-cells = <1>;
+			resets = <&prci PRCI_RST_DDR_CTRL_N>,
+				 <&prci PRCI_RST_DDR_AXI_N>,
+				 <&prci PRCI_RST_DDR_AHB_N>,
+				 <&prci PRCI_RST_DDR_PHY_N>,
+				 <&prci PRCI_RST_GEMGXL_N>;
+			reset-names = "ddr_ctrl", "ddr_axi", "ddr_ahb",
+					"ddr_phy", "gemgxl_reset";
+		};
 		dmc: dmc at 100b0000 {
 			compatible = "sifive,fu540-c000-ddr";
 			reg = <0x0 0x100b0000 0x0 0x0800