diff mbox series

[02/13] thermal: Add thermal driver for i.MX8M

Message ID 20200503141957.14635-3-peng.fan@nxp.com
State Accepted
Commit 2cd7f47983a38397c32bdf4fefeb35cd13600edb
Headers show
Series imx: tmu support and scu thermal update | expand

Commit Message

Peng Fan May 3, 2020, 2:19 p.m. UTC
The driver is ported form Linux Kernel and support driver model.
Users need to provide the tmu node and sensors nodes in DTB.

Signed-off-by: Ye Li <ye.li at nxp.com>
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 drivers/thermal/Kconfig   |   9 ++
 drivers/thermal/Makefile  |   1 +
 drivers/thermal/imx_tmu.c | 325 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 335 insertions(+)
 create mode 100644 drivers/thermal/imx_tmu.c

Comments

Stefano Babic May 11, 2020, 10:16 a.m. UTC | #1
> The driver is ported form Linux Kernel and support driver model.
> Users need to provide the tmu node and sensors nodes in DTB.
> Signed-off-by: Ye Li <ye.li at nxp.com>
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic
diff mbox series

Patch

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index bdf8dc6fef..97d4163e8e 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -26,6 +26,15 @@  config IMX_SCU_THERMAL
 	  boot is hold to the cool device to throttle CPUs when the passive
 	  trip is crossed
 
+config IMX_TMU
+        bool "Thermal Management Unit driver for NXP i.MX8M"
+        depends on ARCH_IMX8M
+        help
+          Support for Temperature sensors on NXP i.MX8M.
+          It supports one critical trip point and one passive trip point.
+	  The boot is hold to the cool device to throttle CPUs when the
+	  passive trip is crossed
+
 config TI_DRA7_THERMAL
         bool "Temperature sensor driver for TI dra7xx SOCs"
         help
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index ef2929d180..15fe847d9f 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -7,3 +7,4 @@  obj-$(CONFIG_DM_THERMAL) += thermal-uclass.o
 obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
 obj-$(CONFIG_IMX_SCU_THERMAL) += imx_scu_thermal.o
 obj-$(CONFIG_TI_DRA7_THERMAL) += ti-bandgap.o
+obj-$(CONFIG_IMX_TMU) += imx_tmu.o
diff --git a/drivers/thermal/imx_tmu.c b/drivers/thermal/imx_tmu.c
new file mode 100644
index 0000000000..f496ce03b6
--- /dev/null
+++ b/drivers/thermal/imx_tmu.c
@@ -0,0 +1,325 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017~2020 NXP
+ *
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <dm.h>
+#include <dm/device-internal.h>
+#include <dm/device.h>
+#include <errno.h>
+#include <fuse.h>
+#include <malloc.h>
+#include <thermal.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define SITES_MAX	16
+
+#define TMR_DISABLE	0x0
+#define TMR_ME		0x80000000
+#define TMR_ALPF	0x0c000000
+#define TMTMIR_DEFAULT	0x00000002
+#define TIER_DISABLE	0x0
+
+/*
+ * i.MX TMU Registers
+ */
+struct imx_tmu_site_regs {
+	u32 tritsr;		/* Immediate Temperature Site Register */
+	u32 tratsr;		/* Average Temperature Site Register */
+	u8 res0[0x8];
+};
+
+struct imx_tmu_regs {
+	u32 tmr;	/* Mode Register */
+	u32 tsr;	/* Status Register */
+	u32 tmtmir;	/* Temperature measurement interval Register */
+	u8 res0[0x14];
+	u32 tier;	/* Interrupt Enable Register */
+	u32 tidr;	/* Interrupt Detect Register */
+	u32 tiscr;	/* Interrupt Site Capture Register */
+	u32 ticscr;	/* Interrupt Critical Site Capture Register */
+	u8 res1[0x10];
+	u32 tmhtcrh;	/* High Temperature Capture Register */
+	u32 tmhtcrl;	/* Low Temperature Capture Register */
+	u8 res2[0x8];
+	u32 tmhtitr;	/* High Temperature Immediate Threshold */
+	u32 tmhtatr;	/* High Temperature Average Threshold */
+	u32 tmhtactr;	/* High Temperature Average Crit Threshold */
+	u8 res3[0x24];
+	u32 ttcfgr;	/* Temperature Configuration Register */
+	u32 tscfgr;	/* Sensor Configuration Register */
+	u8 res4[0x78];
+	struct imx_tmu_site_regs site[SITES_MAX];
+	u8 res5[0x9f8];
+	u32 ipbrr0;	/* IP Block Revision Register 0 */
+	u32 ipbrr1;	/* IP Block Revision Register 1 */
+	u8 res6[0x310];
+	u32 ttr0cr;	/* Temperature Range 0 Control Register */
+	u32 ttr1cr;	/* Temperature Range 1 Control Register */
+	u32 ttr2cr;	/* Temperature Range 2 Control Register */
+	u32 ttr3cr;	/* Temperature Range 3 Control Register */
+};
+
+struct imx_tmu_plat {
+	int critical;
+	int alert;
+	int polling_delay;
+	int id;
+	bool zone_node;
+	struct imx_tmu_regs *regs;
+};
+
+static int read_temperature(struct udevice *dev, int *temp)
+{
+	struct imx_tmu_plat *pdata = dev_get_platdata(dev);
+	u32 val;
+
+	do {
+		val = readl(&pdata->regs->site[pdata->id].tritsr);
+	} while (!(val & 0x80000000));
+
+	*temp = (val & 0xff) * 1000;
+
+	return 0;
+}
+
+int imx_tmu_get_temp(struct udevice *dev, int *temp)
+{
+	struct imx_tmu_plat *pdata = dev_get_platdata(dev);
+	int cpu_tmp = 0;
+	int ret;
+
+	ret = read_temperature(dev, &cpu_tmp);
+	if (ret)
+		return ret;
+
+	while (cpu_tmp >= pdata->alert) {
+		printf("CPU Temperature (%dC) has beyond alert (%dC), close to critical (%dC)", cpu_tmp, pdata->alert, pdata->critical);
+		puts(" waiting...\n");
+		mdelay(pdata->polling_delay);
+		ret = read_temperature(dev, &cpu_tmp);
+		if (ret)
+			return ret;
+	}
+
+	*temp = cpu_tmp / 1000;
+
+	return 0;
+}
+
+static const struct dm_thermal_ops imx_tmu_ops = {
+	.get_temp	= imx_tmu_get_temp,
+};
+
+static int imx_tmu_calibration(struct udevice *dev)
+{
+	int i, val, len, ret;
+	u32 range[4];
+	const fdt32_t *calibration;
+	struct imx_tmu_plat *pdata = dev_get_platdata(dev);
+
+	debug("%s\n", __func__);
+
+	ret = dev_read_u32_array(dev, "fsl,tmu-range", range, 4);
+	if (ret) {
+		printf("TMU: missing calibration range, ret = %d.\n", ret);
+		return ret;
+	}
+
+	/* Init temperature range registers */
+	writel(range[0], &pdata->regs->ttr0cr);
+	writel(range[1], &pdata->regs->ttr1cr);
+	writel(range[2], &pdata->regs->ttr2cr);
+	writel(range[3], &pdata->regs->ttr3cr);
+
+	calibration = dev_read_prop(dev, "fsl,tmu-calibration", &len);
+	if (!calibration || len % 8) {
+		printf("TMU: invalid calibration data.\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < len; i += 8, calibration += 2) {
+		val = fdt32_to_cpu(*calibration);
+		writel(val, &pdata->regs->ttcfgr);
+		val = fdt32_to_cpu(*(calibration + 1));
+		writel(val, &pdata->regs->tscfgr);
+	}
+
+	return 0;
+}
+
+static void imx_tmu_init(struct imx_tmu_plat *pdata)
+{
+	debug("%s\n", __func__);
+
+	/* Disable monitoring */
+	writel(TMR_DISABLE, &pdata->regs->tmr);
+
+	/* Disable interrupt, using polling instead */
+	writel(TIER_DISABLE, &pdata->regs->tier);
+
+	/* Set update_interval */
+	writel(TMTMIR_DEFAULT, &pdata->regs->tmtmir);
+}
+
+static int imx_tmu_enable_msite(struct udevice *dev)
+{
+	struct imx_tmu_plat *pdata = dev_get_platdata(dev);
+	u32 reg;
+
+	debug("%s\n", __func__);
+
+	if (!pdata->regs)
+		return -EIO;
+
+	/* Clear the ME before setting MSITE and ALPF*/
+	reg = readl(&pdata->regs->tmr);
+	reg &= ~TMR_ME;
+	writel(reg, &pdata->regs->tmr);
+
+	reg |= 1 << (15 - pdata->id);
+	reg |= TMR_ALPF;
+	writel(reg, &pdata->regs->tmr);
+
+	/* Enable ME */
+	reg |= TMR_ME;
+	writel(reg, &pdata->regs->tmr);
+
+	return 0;
+}
+
+static int imx_tmu_bind(struct udevice *dev)
+{
+	struct imx_tmu_plat *pdata = dev_get_platdata(dev);
+	int ret;
+	ofnode node, offset;
+	const char *name;
+	const void *prop;
+
+	debug("%s dev name %s\n", __func__, dev->name);
+
+	prop = dev_read_prop(dev, "compatible", NULL);
+	if (!prop)
+		return 0;
+
+	pdata->zone_node = 1;
+
+	node = ofnode_path("/thermal-zones");
+	ofnode_for_each_subnode(offset, node) {
+		/* Bind the subnode to this driver */
+		name = ofnode_get_name(offset);
+
+		ret = device_bind_with_driver_data(dev, dev->driver, name,
+						   dev->driver_data, offset,
+						   NULL);
+		if (ret)
+			printf("Error binding driver '%s': %d\n",
+			       dev->driver->name, ret);
+	}
+
+	return 0;
+}
+
+static int imx_tmu_parse_fdt(struct udevice *dev)
+{
+	struct imx_tmu_plat *pdata = dev_get_platdata(dev), *p_parent_data;
+	struct ofnode_phandle_args args;
+	ofnode trips_np;
+	int ret;
+
+	debug("%s dev name %s\n", __func__, dev->name);
+
+	if (pdata->zone_node) {
+		pdata->regs = (struct imx_tmu_regs *)dev_read_addr_ptr(dev);
+
+		if (!pdata->regs)
+			return -EINVAL;
+		return 0;
+	}
+
+	p_parent_data = dev_get_platdata(dev->parent);
+	if (p_parent_data->zone_node)
+		pdata->regs = p_parent_data->regs;
+
+	ret = dev_read_phandle_with_args(dev, "thermal-sensors",
+					 "#thermal-sensor-cells",
+					 0, 0, &args);
+	if (ret)
+		return ret;
+
+	if (!ofnode_equal(args.node, dev_ofnode(dev->parent)))
+		return -EFAULT;
+
+	if (args.args_count >= 1)
+		pdata->id = args.args[0];
+	else
+		pdata->id = 0;
+
+	debug("args.args_count %d, id %d\n", args.args_count, pdata->id);
+
+	pdata->polling_delay = dev_read_u32_default(dev, "polling-delay", 1000);
+
+	trips_np = ofnode_path("/thermal-zones/cpu-thermal/trips");
+	ofnode_for_each_subnode(trips_np, trips_np) {
+		const char *type;
+
+		type = ofnode_get_property(trips_np, "type", NULL);
+		if (!type)
+			continue;
+		if (!strcmp(type, "critical"))
+			pdata->critical = ofnode_read_u32_default(trips_np, "temperature", 85);
+		else if (strcmp(type, "passive") == 0)
+			pdata->alert = ofnode_read_u32_default(trips_np, "temperature", 80);
+		else
+			continue;
+	}
+
+	debug("id %d polling_delay %d, critical %d, alert %d\n",
+	      pdata->id, pdata->polling_delay, pdata->critical, pdata->alert);
+
+	return 0;
+}
+
+static int imx_tmu_probe(struct udevice *dev)
+{
+	struct imx_tmu_plat *pdata = dev_get_platdata(dev);
+	int ret;
+
+	ret = imx_tmu_parse_fdt(dev);
+	if (ret) {
+		printf("Error in parsing TMU FDT %d\n", ret);
+		return ret;
+	}
+
+	if (pdata->zone_node) {
+		imx_tmu_init(pdata);
+		imx_tmu_calibration(dev);
+	} else {
+		imx_tmu_enable_msite(dev);
+	}
+
+	return 0;
+}
+
+static const struct udevice_id imx_tmu_ids[] = {
+	{ .compatible = "fsl,imx8mq-tmu", },
+	{ }
+};
+
+U_BOOT_DRIVER(imx_tmu) = {
+	.name	= "imx_tmu",
+	.id	= UCLASS_THERMAL,
+	.ops	= &imx_tmu_ops,
+	.of_match = imx_tmu_ids,
+	.bind = imx_tmu_bind,
+	.probe	= imx_tmu_probe,
+	.platdata_auto_alloc_size = sizeof(struct imx_tmu_plat),
+	.flags  = DM_FLAG_PRE_RELOC,
+};