diff mbox series

[13/22] x86: mp: Allow running functions on multiple CPUs

Message ID 20200521202309.13.I15c8366d7a11d1eeea57e5ac4d0471a95725ce9e@changeid
State New
Headers show
Series x86: Enhance MTRR functionality to support multiple CPUs | expand

Commit Message

Simon Glass May 22, 2020, 2:23 a.m. UTC
Add a way to run a function on a selection of CPUs. This supports either
a single CPU, all CPUs, just the main CPU or just the 'APs', in Intel
terminology.

It works by writing into a mailbox and then waiting for the CPUs to notice
it, take action and indicate they are done.

When SMP is not yet enabled, this just calls the function on the main CPU.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 arch/x86/cpu/mp_init.c    | 82 ++++++++++++++++++++++++++++++++++++---
 arch/x86/include/asm/mp.h | 30 ++++++++++++++
 2 files changed, 106 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/arch/x86/cpu/mp_init.c b/arch/x86/cpu/mp_init.c
index 139e9749e74..9f97dc7a9ba 100644
--- a/arch/x86/cpu/mp_init.c
+++ b/arch/x86/cpu/mp_init.c
@@ -50,12 +50,7 @@  struct cpu_map {
 };
 
 struct mp_callback {
-	/**
-	 * func() - Function to call on the AP
-	 *
-	 * @arg: Argument to pass
-	 */
-	void (*func)(void *arg);
+	mp_run_func func;
 	void *arg;
 	int logical_cpu_number;
 };
@@ -483,6 +478,50 @@  static void store_callback(struct mp_callback **slot, struct mp_callback *val)
 	);
 }
 
+static int run_ap_work(struct mp_callback *callback, struct udevice *bsp,
+		       int num_cpus, uint expire_ms)
+{
+	int cur_cpu = bsp->req_seq;
+	int num_aps = num_cpus - 1; /* number of non-BSPs to get this message */
+	int cpus_accepted;
+	ulong start;
+	int i;
+
+	/* Signal to all the APs to run the func. */
+	for (i = 0; i < num_cpus; i++) {
+		if (cur_cpu != i)
+			store_callback(&ap_callbacks[i], callback);
+	}
+	mfence();
+
+	/* Wait for all the APs to signal back that call has been accepted. */
+	start = get_timer(0);
+
+	do {
+		mdelay(1);
+		cpus_accepted = 0;
+
+		for (i = 0; i < num_cpus; i++) {
+			if (cur_cpu == i)
+				continue;
+			if (!read_callback(&ap_callbacks[i]))
+				cpus_accepted++;
+		}
+
+		if (expire_ms && get_timer(start) >= expire_ms) {
+			log(UCLASS_CPU, LOGL_CRIT,
+			    "AP call expired; %d/%d CPUs accepted\n",
+			    cpus_accepted, num_aps);
+			return -ETIMEDOUT;
+		}
+	} while (cpus_accepted != num_aps);
+
+	/* Make sure we can see any data written by the APs */
+	mfence();
+
+	return 0;
+}
+
 /**
  * ap_wait_for_instruction() - Wait for and process requests from the main CPU
  *
@@ -539,6 +578,37 @@  static struct mp_flight_record mp_steps[] = {
 	MP_FR_BLOCK_APS(ap_wait_for_instruction, NULL, NULL, NULL),
 };
 
+int mp_run_on_cpus(int cpu_select, mp_run_func func, void *arg)
+{
+	struct mp_callback lcb = {
+		.func = func,
+		.arg = arg,
+		.logical_cpu_number = cpu_select,
+	};
+	struct udevice *dev;
+	int num_cpus;
+	int ret;
+
+	if (!(gd->flags & GD_FLG_SMP_INIT))
+		return -ENXIO;
+
+	ret = get_bsp(&dev, &num_cpus);
+	if (ret < 0)
+		return log_msg_ret("bsp", ret);
+	if (cpu_select == MP_SELECT_ALL || cpu_select == MP_SELECT_BSP ||
+	    cpu_select == ret) {
+		/* Run on BSP first */
+		func(arg);
+	}
+
+	/* Allow up to 1 second for all APs to finish */
+	ret = run_ap_work(&lcb, dev, num_cpus, 1000 /* ms */);
+	if (ret)
+		return log_msg_ret("aps", ret);
+
+	return 0;
+}
+
 int mp_init(void)
 {
 	int num_aps, num_cpus;
diff --git a/arch/x86/include/asm/mp.h b/arch/x86/include/asm/mp.h
index 41b1575f4be..0272b3c0b6a 100644
--- a/arch/x86/include/asm/mp.h
+++ b/arch/x86/include/asm/mp.h
@@ -86,4 +86,34 @@  int mp_init(void);
 /* Set up additional CPUs */
 int x86_mp_init(void);
 
+/**
+ * mp_run_func() - Function to call on the AP
+ *
+ * @arg: Argument to pass
+ */
+typedef void (*mp_run_func)(void *arg);
+
+#if defined(CONFIG_SMP) && !CONFIG_IS_ENABLED(X86_64)
+/**
+ * mp_run_on_cpus() - Run a function on one or all CPUs
+ *
+ * This does not return until all CPUs have completed the work
+ *
+ * @cpu_select: CPU to run on, or MP_SELECT_ALL for all, or MP_SELECT_BSP for
+ *	BSP
+ * @func: Function to run
+ * @arg: Argument to pass to the function
+ * @return 0 on success, -ve on error
+ */
+int mp_run_on_cpus(int cpu_select, mp_run_func func, void *arg);
+#else
+static inline int mp_run_on_cpus(int cpu_select, mp_run_func func, void *arg)
+{
+	/* There is only one CPU, so just call the function here */
+	func(arg);
+
+	return 0;
+}
+#endif
+
 #endif /* _X86_MP_H_ */