@@ -369,6 +369,15 @@ static struct pxaficp_platform_data tosa_ficp_platform_data = {
/*
* Tosa AC IN
*/
+static struct gpiod_lookup_table tosa_power_gpiod_table = {
+ .dev_id = "gpio-charger",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_AC_IN,
+ NULL, GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static char *tosa_ac_supplied_to[] = {
"main-battery",
"backup-battery",
@@ -378,8 +387,6 @@ static char *tosa_ac_supplied_to[] = {
static struct gpio_charger_platform_data tosa_power_data = {
.name = "charger",
.type = POWER_SUPPLY_TYPE_MAINS,
- .gpio = TOSA_GPIO_AC_IN,
- .gpio_active_low = 1,
.supplied_to = tosa_ac_supplied_to,
.num_supplicants = ARRAY_SIZE(tosa_ac_supplied_to),
};
@@ -951,6 +958,7 @@ static void __init tosa_init(void)
clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL);
gpiod_add_lookup_table(&tosa_udc_gpiod_table);
+ gpiod_add_lookup_table(&tosa_power_gpiod_table);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
@@ -30,6 +30,7 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/power/gpio-charger.h>
#include <video/sa1100fb.h>
@@ -131,16 +132,23 @@ static struct irda_platform_data collie_ir_data = {
/*
* Collie AC IN
*/
+static struct gpiod_lookup_table collie_power_gpiod_table = {
+ .dev_id = "gpio-charger",
+ .table = {
+ GPIO_LOOKUP("gpio", COLLIE_GPIO_AC_IN,
+ NULL, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static char *collie_ac_supplied_to[] = {
"main-battery",
"backup-battery",
};
-
static struct gpio_charger_platform_data collie_power_data = {
.name = "charger",
.type = POWER_SUPPLY_TYPE_MAINS,
- .gpio = COLLIE_GPIO_AC_IN,
.supplied_to = collie_ac_supplied_to,
.num_supplicants = ARRAY_SIZE(collie_ac_supplied_to),
};
@@ -386,6 +394,8 @@ static void __init collie_init(void)
platform_scoop_config = &collie_pcmcia_config;
+ gpiod_add_lookup_table(&collie_power_gpiod_table);
+
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if (ret) {
printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
@@ -5,7 +5,6 @@
*/
#include <linux/device.h>
-#include <linux/gpio.h> /* For legacy platform data */
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
@@ -126,7 +125,6 @@ static int gpio_charger_probe(struct platform_device *pdev)
struct power_supply_desc *charger_desc;
struct gpio_desc *charge_status;
int charge_status_irq;
- unsigned long flags;
int ret;
if (!pdata && !dev->of_node) {
@@ -143,29 +141,7 @@ static int gpio_charger_probe(struct platform_device *pdev)
* boardfile descriptor tables. It's good to try this first.
*/
gpio_charger->gpiod = devm_gpiod_get(dev, NULL, GPIOD_IN);
-
- /*
- * If this fails and we're not using device tree, try the
- * legacy platform data method.
- */
- if (IS_ERR(gpio_charger->gpiod) && !dev->of_node) {
- /* Non-DT: use legacy GPIO numbers */
- if (!gpio_is_valid(pdata->gpio)) {
- dev_err(dev, "Invalid gpio pin in pdata\n");
- return -EINVAL;
- }
- flags = GPIOF_IN;
- if (pdata->gpio_active_low)
- flags |= GPIOF_ACTIVE_LOW;
- ret = devm_gpio_request_one(dev, pdata->gpio, flags,
- dev_name(dev));
- if (ret) {
- dev_err(dev, "Failed to request gpio pin: %d\n", ret);
- return ret;
- }
- /* Then convert this to gpiod for now */
- gpio_charger->gpiod = gpio_to_desc(pdata->gpio);
- } else if (IS_ERR(gpio_charger->gpiod)) {
+ if (IS_ERR(gpio_charger->gpiod)) {
/* Just try again if this happens */
if (PTR_ERR(gpio_charger->gpiod) == -EPROBE_DEFER)
return -EPROBE_DEFER;
@@ -13,18 +13,12 @@
* struct gpio_charger_platform_data - platform_data for gpio_charger devices
* @name: Name for the chargers power_supply device
* @type: Type of the charger
- * @gpio: GPIO which is used to indicate the chargers status
- * @gpio_active_low: Should be set to 1 if the GPIO is active low otherwise 0
* @supplied_to: Array of battery names to which this chargers supplies power
* @num_supplicants: Number of entries in the supplied_to array
*/
struct gpio_charger_platform_data {
const char *name;
enum power_supply_type type;
-
- int gpio;
- int gpio_active_low;
-
char **supplied_to;
size_t num_supplicants;
};
This converts the GPIO charger to use exclusively GPIO descriptors, moving the two remaining platforms passing global GPIO numbers over to using a GPIO descriptor table. Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- arch/arm/mach-pxa/tosa.c | 12 ++++++++++-- arch/arm/mach-sa1100/collie.c | 14 ++++++++++++-- drivers/power/supply/gpio-charger.c | 26 +------------------------- include/linux/power/gpio-charger.h | 6 ------ 4 files changed, 23 insertions(+), 35 deletions(-) -- 2.26.2