diff mbox series

[25/32] wireless: ath: wil6210: wmi: Fix formatting and demote non-conforming function headers

Message ID 20200821071644.109970-26-lee.jones@linaro.org
State New
Headers show
Series Set 2: Rid W=1 warnings in Wireless | expand

Commit Message

Lee Jones Aug. 21, 2020, 7:16 a.m. UTC
Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/ath/wil6210/wmi.c:52: warning: Incorrect use of kernel-doc format:  * Addressing - theory of operations
 drivers/net/wireless/ath/wil6210/wmi.c:70: warning: Incorrect use of kernel-doc format:  * @sparrow_fw_mapping provides memory remapping table for sparrow
 drivers/net/wireless/ath/wil6210/wmi.c:80: warning: cannot understand function prototype: 'const struct fw_map sparrow_fw_mapping[] = '
 drivers/net/wireless/ath/wil6210/wmi.c:107: warning: Cannot understand  * @sparrow_d0_mac_rgf_ext - mac_rgf_ext section for Sparrow D0
 drivers/net/wireless/ath/wil6210/wmi.c:115: warning: Cannot understand  * @talyn_fw_mapping provides memory remapping table for Talyn
 drivers/net/wireless/ath/wil6210/wmi.c:158: warning: Cannot understand  * @talyn_mb_fw_mapping provides memory remapping table for Talyn-MB
 drivers/net/wireless/ath/wil6210/wmi.c:236: warning: Function parameter or member 'x' not described in 'wmi_addr_remap'
 drivers/net/wireless/ath/wil6210/wmi.c:255: warning: Function parameter or member 'section' not described in 'wil_find_fw_mapping'
 drivers/net/wireless/ath/wil6210/wmi.c:278: warning: Function parameter or member 'wil' not described in 'wmi_buffer_block'
 drivers/net/wireless/ath/wil6210/wmi.c:278: warning: Function parameter or member 'ptr_' not described in 'wmi_buffer_block'
 drivers/net/wireless/ath/wil6210/wmi.c:278: warning: Function parameter or member 'size' not described in 'wmi_buffer_block'
 drivers/net/wireless/ath/wil6210/wmi.c:307: warning: Function parameter or member 'wil' not described in 'wmi_addr'
 drivers/net/wireless/ath/wil6210/wmi.c:307: warning: Function parameter or member 'ptr' not described in 'wmi_addr'
 drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function parameter or member 'wil' not described in 'wil_find_cid_ringid_sta'
 drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function parameter or member 'vif' not described in 'wil_find_cid_ringid_sta'
 drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function parameter or member 'cid' not described in 'wil_find_cid_ringid_sta'
 drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function parameter or member 'ringid' not described in 'wil_find_cid_ringid_sta'
 drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function parameter or member 'vif' not described in 'wmi_evt_ignore'
 drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function parameter or member 'id' not described in 'wmi_evt_ignore'
 drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function parameter or member 'd' not described in 'wmi_evt_ignore'
 drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function parameter or member 'len' not described in 'wmi_evt_ignore'
 drivers/net/wireless/ath/wil6210/wmi.c:2588: warning: Function parameter or member 'wil' not described in 'wmi_rxon'

Cc: Maya Erez <merez@codeaurora.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: wil6210@qti.qualcomm.com
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>

---
 drivers/net/wireless/ath/wil6210/wmi.c | 28 ++++++++++++++------------
 1 file changed, 15 insertions(+), 13 deletions(-)

-- 
2.25.1

Comments

merez@codeaurora.org Aug. 26, 2020, 10:21 a.m. UTC | #1
On 2020-08-21 10:16, Lee Jones wrote:
> Fixes the following W=1 kernel build warning(s):
> 
>  drivers/net/wireless/ath/wil6210/wmi.c:52: warning: Incorrect use of
> kernel-doc format:  * Addressing - theory of operations
>  drivers/net/wireless/ath/wil6210/wmi.c:70: warning: Incorrect use of
> kernel-doc format:  * @sparrow_fw_mapping provides memory remapping
> table for sparrow
>  drivers/net/wireless/ath/wil6210/wmi.c:80: warning: cannot understand
> function prototype: 'const struct fw_map sparrow_fw_mapping[] = '
>  drivers/net/wireless/ath/wil6210/wmi.c:107: warning: Cannot
> understand  * @sparrow_d0_mac_rgf_ext - mac_rgf_ext section for
> Sparrow D0
>  drivers/net/wireless/ath/wil6210/wmi.c:115: warning: Cannot
> understand  * @talyn_fw_mapping provides memory remapping table for
> Talyn
>  drivers/net/wireless/ath/wil6210/wmi.c:158: warning: Cannot
> understand  * @talyn_mb_fw_mapping provides memory remapping table for
> Talyn-MB
>  drivers/net/wireless/ath/wil6210/wmi.c:236: warning: Function
> parameter or member 'x' not described in 'wmi_addr_remap'
>  drivers/net/wireless/ath/wil6210/wmi.c:255: warning: Function
> parameter or member 'section' not described in 'wil_find_fw_mapping'
>  drivers/net/wireless/ath/wil6210/wmi.c:278: warning: Function
> parameter or member 'wil' not described in 'wmi_buffer_block'
>  drivers/net/wireless/ath/wil6210/wmi.c:278: warning: Function
> parameter or member 'ptr_' not described in 'wmi_buffer_block'
>  drivers/net/wireless/ath/wil6210/wmi.c:278: warning: Function
> parameter or member 'size' not described in 'wmi_buffer_block'
>  drivers/net/wireless/ath/wil6210/wmi.c:307: warning: Function
> parameter or member 'wil' not described in 'wmi_addr'
>  drivers/net/wireless/ath/wil6210/wmi.c:307: warning: Function
> parameter or member 'ptr' not described in 'wmi_addr'
>  drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function
> parameter or member 'wil' not described in 'wil_find_cid_ringid_sta'
>  drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function
> parameter or member 'vif' not described in 'wil_find_cid_ringid_sta'
>  drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function
> parameter or member 'cid' not described in 'wil_find_cid_ringid_sta'
>  drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function
> parameter or member 'ringid' not described in
> 'wil_find_cid_ringid_sta'
>  drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function
> parameter or member 'vif' not described in 'wmi_evt_ignore'
>  drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function
> parameter or member 'id' not described in 'wmi_evt_ignore'
>  drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function
> parameter or member 'd' not described in 'wmi_evt_ignore'
>  drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function
> parameter or member 'len' not described in 'wmi_evt_ignore'
>  drivers/net/wireless/ath/wil6210/wmi.c:2588: warning: Function
> parameter or member 'wil' not described in 'wmi_rxon'
> 
> Cc: Maya Erez <merez@codeaurora.org>
> Cc: Kalle Valo <kvalo@codeaurora.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: linux-wireless@vger.kernel.org
> Cc: wil6210@qti.qualcomm.com
> Cc: netdev@vger.kernel.org
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
>  drivers/net/wireless/ath/wil6210/wmi.c | 28 ++++++++++++++------------
>  1 file changed, 15 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/net/wireless/ath/wil6210/wmi.c
> b/drivers/net/wireless/ath/wil6210/wmi.c
> index c7136ce567eea..3a6ee85acf6c7 100644
> --- a/drivers/net/wireless/ath/wil6210/wmi.c
> +++ b/drivers/net/wireless/ath/wil6210/wmi.c
> @@ -31,7 +31,7 @@ MODULE_PARM_DESC(led_id,
>  #define WIL_WAIT_FOR_SUSPEND_RESUME_COMP 200
>  #define WIL_WMI_PCP_STOP_TO_MS 5000
> 
> -/**
> +/*
>   * WMI event receiving - theory of operations
>   *
>   * When firmware about to report WMI event, it fills memory area

The correct format for such documentation blocks is:
/**
  * DOC: Theory of Operation

This comment is also applicable for the rest of such documentation 
blocks changed in this patch.

> @@ -66,7 +66,7 @@ MODULE_PARM_DESC(led_id,
>   * AHB address must be used.
>   */
> 
> -/**
> +/*
>   * @sparrow_fw_mapping provides memory remapping table for sparrow
>   *
>   * array size should be in sync with the declaration in the wil6210.h
For files in net/ and drivers/net/ the preferred style for long 
(multi-line) comments is a different and
the text should be in the same line as /*, as follows:
/* sparrow_fw_mapping provides memory remapping table for sparrow
I would also remove the @ from @sparrow_fw_mapping.
This comment is also applicable for the rest of such documentation 
blocks changed in this patch.
Lee Jones Aug. 26, 2020, 11:21 a.m. UTC | #2
On Wed, 26 Aug 2020, merez@codeaurora.org wrote:

> On 2020-08-21 10:16, Lee Jones wrote:

> > Fixes the following W=1 kernel build warning(s):

> > 

> >  drivers/net/wireless/ath/wil6210/wmi.c:52: warning: Incorrect use of

> > kernel-doc format:  * Addressing - theory of operations

> >  drivers/net/wireless/ath/wil6210/wmi.c:70: warning: Incorrect use of

> > kernel-doc format:  * @sparrow_fw_mapping provides memory remapping

> > table for sparrow

> >  drivers/net/wireless/ath/wil6210/wmi.c:80: warning: cannot understand

> > function prototype: 'const struct fw_map sparrow_fw_mapping[] = '

> >  drivers/net/wireless/ath/wil6210/wmi.c:107: warning: Cannot

> > understand  * @sparrow_d0_mac_rgf_ext - mac_rgf_ext section for

> > Sparrow D0

> >  drivers/net/wireless/ath/wil6210/wmi.c:115: warning: Cannot

> > understand  * @talyn_fw_mapping provides memory remapping table for

> > Talyn

> >  drivers/net/wireless/ath/wil6210/wmi.c:158: warning: Cannot

> > understand  * @talyn_mb_fw_mapping provides memory remapping table for

> > Talyn-MB

> >  drivers/net/wireless/ath/wil6210/wmi.c:236: warning: Function

> > parameter or member 'x' not described in 'wmi_addr_remap'

> >  drivers/net/wireless/ath/wil6210/wmi.c:255: warning: Function

> > parameter or member 'section' not described in 'wil_find_fw_mapping'

> >  drivers/net/wireless/ath/wil6210/wmi.c:278: warning: Function

> > parameter or member 'wil' not described in 'wmi_buffer_block'

> >  drivers/net/wireless/ath/wil6210/wmi.c:278: warning: Function

> > parameter or member 'ptr_' not described in 'wmi_buffer_block'

> >  drivers/net/wireless/ath/wil6210/wmi.c:278: warning: Function

> > parameter or member 'size' not described in 'wmi_buffer_block'

> >  drivers/net/wireless/ath/wil6210/wmi.c:307: warning: Function

> > parameter or member 'wil' not described in 'wmi_addr'

> >  drivers/net/wireless/ath/wil6210/wmi.c:307: warning: Function

> > parameter or member 'ptr' not described in 'wmi_addr'

> >  drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function

> > parameter or member 'wil' not described in 'wil_find_cid_ringid_sta'

> >  drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function

> > parameter or member 'vif' not described in 'wil_find_cid_ringid_sta'

> >  drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function

> > parameter or member 'cid' not described in 'wil_find_cid_ringid_sta'

> >  drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function

> > parameter or member 'ringid' not described in

> > 'wil_find_cid_ringid_sta'

> >  drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function

> > parameter or member 'vif' not described in 'wmi_evt_ignore'

> >  drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function

> > parameter or member 'id' not described in 'wmi_evt_ignore'

> >  drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function

> > parameter or member 'd' not described in 'wmi_evt_ignore'

> >  drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function

> > parameter or member 'len' not described in 'wmi_evt_ignore'

> >  drivers/net/wireless/ath/wil6210/wmi.c:2588: warning: Function

> > parameter or member 'wil' not described in 'wmi_rxon'

> > 

> > Cc: Maya Erez <merez@codeaurora.org>

> > Cc: Kalle Valo <kvalo@codeaurora.org>

> > Cc: "David S. Miller" <davem@davemloft.net>

> > Cc: Jakub Kicinski <kuba@kernel.org>

> > Cc: linux-wireless@vger.kernel.org

> > Cc: wil6210@qti.qualcomm.com

> > Cc: netdev@vger.kernel.org

> > Signed-off-by: Lee Jones <lee.jones@linaro.org>

> > ---

> >  drivers/net/wireless/ath/wil6210/wmi.c | 28 ++++++++++++++------------

> >  1 file changed, 15 insertions(+), 13 deletions(-)

> > 

> > diff --git a/drivers/net/wireless/ath/wil6210/wmi.c

> > b/drivers/net/wireless/ath/wil6210/wmi.c

> > index c7136ce567eea..3a6ee85acf6c7 100644

> > --- a/drivers/net/wireless/ath/wil6210/wmi.c

> > +++ b/drivers/net/wireless/ath/wil6210/wmi.c

> > @@ -31,7 +31,7 @@ MODULE_PARM_DESC(led_id,

> >  #define WIL_WAIT_FOR_SUSPEND_RESUME_COMP 200

> >  #define WIL_WMI_PCP_STOP_TO_MS 5000

> > 

> > -/**

> > +/*

> >   * WMI event receiving - theory of operations

> >   *

> >   * When firmware about to report WMI event, it fills memory area

> 

> The correct format for such documentation blocks is:

> /**

>  * DOC: Theory of Operation

> 

> This comment is also applicable for the rest of such documentation blocks

> changed in this patch.


Ah yes, good point.  Will fix.

> > @@ -66,7 +66,7 @@ MODULE_PARM_DESC(led_id,

> >   * AHB address must be used.

> >   */

> > 

> > -/**

> > +/*

> >   * @sparrow_fw_mapping provides memory remapping table for sparrow

> >   *

> >   * array size should be in sync with the declaration in the wil6210.h

> For files in net/ and drivers/net/ the preferred style for long (multi-line)

> comments is a different and

> the text should be in the same line as /*, as follows:

> /* sparrow_fw_mapping provides memory remapping table for sparrow

> I would also remove the @ from @sparrow_fw_mapping.

> This comment is also applicable for the rest of such documentation blocks

> changed in this patch.


Sounds fair.  Will also fix.

Thank you.

-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
Kalle Valo Aug. 26, 2020, 3:55 p.m. UTC | #3
Lee Jones <lee.jones@linaro.org> wrote:

> Fixes the following W=1 kernel build warning(s):

> 

>  drivers/net/wireless/ath/wil6210/wmi.c:52: warning: Incorrect use of kernel-doc format:  * Addressing - theory of operations

>  drivers/net/wireless/ath/wil6210/wmi.c:70: warning: Incorrect use of kernel-doc format:  * @sparrow_fw_mapping provides memory remapping table for sparrow

>  drivers/net/wireless/ath/wil6210/wmi.c:80: warning: cannot understand function prototype: 'const struct fw_map sparrow_fw_mapping[] = '

>  drivers/net/wireless/ath/wil6210/wmi.c:107: warning: Cannot understand  * @sparrow_d0_mac_rgf_ext - mac_rgf_ext section for Sparrow D0

>  drivers/net/wireless/ath/wil6210/wmi.c:115: warning: Cannot understand  * @talyn_fw_mapping provides memory remapping table for Talyn

>  drivers/net/wireless/ath/wil6210/wmi.c:158: warning: Cannot understand  * @talyn_mb_fw_mapping provides memory remapping table for Talyn-MB

>  drivers/net/wireless/ath/wil6210/wmi.c:236: warning: Function parameter or member 'x' not described in 'wmi_addr_remap'

>  drivers/net/wireless/ath/wil6210/wmi.c:255: warning: Function parameter or member 'section' not described in 'wil_find_fw_mapping'

>  drivers/net/wireless/ath/wil6210/wmi.c:278: warning: Function parameter or member 'wil' not described in 'wmi_buffer_block'

>  drivers/net/wireless/ath/wil6210/wmi.c:278: warning: Function parameter or member 'ptr_' not described in 'wmi_buffer_block'

>  drivers/net/wireless/ath/wil6210/wmi.c:278: warning: Function parameter or member 'size' not described in 'wmi_buffer_block'

>  drivers/net/wireless/ath/wil6210/wmi.c:307: warning: Function parameter or member 'wil' not described in 'wmi_addr'

>  drivers/net/wireless/ath/wil6210/wmi.c:307: warning: Function parameter or member 'ptr' not described in 'wmi_addr'

>  drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function parameter or member 'wil' not described in 'wil_find_cid_ringid_sta'

>  drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function parameter or member 'vif' not described in 'wil_find_cid_ringid_sta'

>  drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function parameter or member 'cid' not described in 'wil_find_cid_ringid_sta'

>  drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function parameter or member 'ringid' not described in 'wil_find_cid_ringid_sta'

>  drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function parameter or member 'vif' not described in 'wmi_evt_ignore'

>  drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function parameter or member 'id' not described in 'wmi_evt_ignore'

>  drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function parameter or member 'd' not described in 'wmi_evt_ignore'

>  drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function parameter or member 'len' not described in 'wmi_evt_ignore'

>  drivers/net/wireless/ath/wil6210/wmi.c:2588: warning: Function parameter or member 'wil' not described in 'wmi_rxon'

> 

> Cc: Maya Erez <merez@codeaurora.org>

> Cc: Kalle Valo <kvalo@codeaurora.org>

> Cc: "David S. Miller" <davem@davemloft.net>

> Cc: Jakub Kicinski <kuba@kernel.org>

> Cc: linux-wireless@vger.kernel.org

> Cc: wil6210@qti.qualcomm.com

> Cc: netdev@vger.kernel.org

> Signed-off-by: Lee Jones <lee.jones@linaro.org>


So what's the plan, should I drop the six patches for wil6210 in this patchset?

-- 
https://patchwork.kernel.org/patch/11728319/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Lee Jones Aug. 27, 2020, 6:33 a.m. UTC | #4
On Wed, 26 Aug 2020, Kalle Valo wrote:

> Lee Jones <lee.jones@linaro.org> wrote:

> 

> > Fixes the following W=1 kernel build warning(s):

> > 

> >  drivers/net/wireless/ath/wil6210/wmi.c:52: warning: Incorrect use of kernel-doc format:  * Addressing - theory of operations

> >  drivers/net/wireless/ath/wil6210/wmi.c:70: warning: Incorrect use of kernel-doc format:  * @sparrow_fw_mapping provides memory remapping table for sparrow

> >  drivers/net/wireless/ath/wil6210/wmi.c:80: warning: cannot understand function prototype: 'const struct fw_map sparrow_fw_mapping[] = '

> >  drivers/net/wireless/ath/wil6210/wmi.c:107: warning: Cannot understand  * @sparrow_d0_mac_rgf_ext - mac_rgf_ext section for Sparrow D0

> >  drivers/net/wireless/ath/wil6210/wmi.c:115: warning: Cannot understand  * @talyn_fw_mapping provides memory remapping table for Talyn

> >  drivers/net/wireless/ath/wil6210/wmi.c:158: warning: Cannot understand  * @talyn_mb_fw_mapping provides memory remapping table for Talyn-MB

> >  drivers/net/wireless/ath/wil6210/wmi.c:236: warning: Function parameter or member 'x' not described in 'wmi_addr_remap'

> >  drivers/net/wireless/ath/wil6210/wmi.c:255: warning: Function parameter or member 'section' not described in 'wil_find_fw_mapping'

> >  drivers/net/wireless/ath/wil6210/wmi.c:278: warning: Function parameter or member 'wil' not described in 'wmi_buffer_block'

> >  drivers/net/wireless/ath/wil6210/wmi.c:278: warning: Function parameter or member 'ptr_' not described in 'wmi_buffer_block'

> >  drivers/net/wireless/ath/wil6210/wmi.c:278: warning: Function parameter or member 'size' not described in 'wmi_buffer_block'

> >  drivers/net/wireless/ath/wil6210/wmi.c:307: warning: Function parameter or member 'wil' not described in 'wmi_addr'

> >  drivers/net/wireless/ath/wil6210/wmi.c:307: warning: Function parameter or member 'ptr' not described in 'wmi_addr'

> >  drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function parameter or member 'wil' not described in 'wil_find_cid_ringid_sta'

> >  drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function parameter or member 'vif' not described in 'wil_find_cid_ringid_sta'

> >  drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function parameter or member 'cid' not described in 'wil_find_cid_ringid_sta'

> >  drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function parameter or member 'ringid' not described in 'wil_find_cid_ringid_sta'

> >  drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function parameter or member 'vif' not described in 'wmi_evt_ignore'

> >  drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function parameter or member 'id' not described in 'wmi_evt_ignore'

> >  drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function parameter or member 'd' not described in 'wmi_evt_ignore'

> >  drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function parameter or member 'len' not described in 'wmi_evt_ignore'

> >  drivers/net/wireless/ath/wil6210/wmi.c:2588: warning: Function parameter or member 'wil' not described in 'wmi_rxon'

> > 

> > Cc: Maya Erez <merez@codeaurora.org>

> > Cc: Kalle Valo <kvalo@codeaurora.org>

> > Cc: "David S. Miller" <davem@davemloft.net>

> > Cc: Jakub Kicinski <kuba@kernel.org>

> > Cc: linux-wireless@vger.kernel.org

> > Cc: wil6210@qti.qualcomm.com

> > Cc: netdev@vger.kernel.org

> > Signed-off-by: Lee Jones <lee.jones@linaro.org>

> 

> So what's the plan, should I drop the six patches for wil6210 in this patchset?


I'll fix them and submit the v2s in reply-to the v1s.

-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index c7136ce567eea..3a6ee85acf6c7 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -31,7 +31,7 @@  MODULE_PARM_DESC(led_id,
 #define WIL_WAIT_FOR_SUSPEND_RESUME_COMP 200
 #define WIL_WMI_PCP_STOP_TO_MS 5000
 
-/**
+/*
  * WMI event receiving - theory of operations
  *
  * When firmware about to report WMI event, it fills memory area
@@ -48,7 +48,7 @@  MODULE_PARM_DESC(led_id,
  * won't be completed because of blocked IRQ thread.
  */
 
-/**
+/*
  * Addressing - theory of operations
  *
  * There are several buses present on the WIL6210 card.
@@ -66,7 +66,7 @@  MODULE_PARM_DESC(led_id,
  * AHB address must be used.
  */
 
-/**
+/*
  * @sparrow_fw_mapping provides memory remapping table for sparrow
  *
  * array size should be in sync with the declaration in the wil6210.h
@@ -103,7 +103,7 @@  const struct fw_map sparrow_fw_mapping[] = {
 	{0x800000, 0x804000, 0x940000, "uc_data", false, false},
 };
 
-/**
+/*
  * @sparrow_d0_mac_rgf_ext - mac_rgf_ext section for Sparrow D0
  * it is a bit larger to support extra features
  */
@@ -111,7 +111,7 @@  const struct fw_map sparrow_d0_mac_rgf_ext = {
 	0x88c000, 0x88c500, 0x88c000, "mac_rgf_ext", true, true
 };
 
-/**
+/*
  * @talyn_fw_mapping provides memory remapping table for Talyn
  *
  * array size should be in sync with the declaration in the wil6210.h
@@ -154,7 +154,7 @@  const struct fw_map talyn_fw_mapping[] = {
 	{0x800000, 0x808000, 0xa78000, "uc_data", false, false},
 };
 
-/**
+/*
  * @talyn_mb_fw_mapping provides memory remapping table for Talyn-MB
  *
  * array size should be in sync with the declaration in the wil6210.h
@@ -229,7 +229,7 @@  u8 led_polarity = LED_POLARITY_LOW_ACTIVE;
 
 /**
  * return AHB address for given firmware internal (linker) address
- * @x - internal address
+ * @x: internal address
  * If address have no valid AHB mapping, return 0
  */
 static u32 wmi_addr_remap(u32 x)
@@ -247,7 +247,7 @@  static u32 wmi_addr_remap(u32 x)
 
 /**
  * find fw_mapping entry by section name
- * @section - section name
+ * @section: section name
  *
  * Return pointer to section or NULL if not found
  */
@@ -265,8 +265,9 @@  struct fw_map *wil_find_fw_mapping(const char *section)
 
 /**
  * Check address validity for WMI buffer; remap if needed
- * @ptr - internal (linker) fw/ucode address
- * @size - if non zero, validate the block does not
+ * @wil: driver data
+ * @ptr: internal (linker) fw/ucode address
+ * @size: if non zero, validate the block does not
  *  exceed the device memory (bar)
  *
  * Valid buffer should be DWORD aligned
@@ -300,7 +301,7 @@  void __iomem *wmi_buffer(struct wil6210_priv *wil, __le32 ptr_)
 	return wmi_buffer_block(wil, ptr_, 0);
 }
 
-/**
+/*
  * Check address validity
  */
 void __iomem *wmi_addr(struct wil6210_priv *wil, u32 ptr)
@@ -1577,7 +1578,7 @@  wmi_evt_link_stats(struct wil6210_vif *vif, int id, void *d, int len)
 			     evt->payload, payload_size);
 }
 
-/**
+/*
  * find cid and ringid for the station vif
  *
  * return error, if other interfaces are used or ring was not found
@@ -1868,7 +1869,7 @@  wmi_evt_link_monitor(struct wil6210_vif *vif, int id, void *d, int len)
 	cfg80211_cqm_rssi_notify(ndev, event_type, evt->rssi_level, GFP_KERNEL);
 }
 
-/**
+/*
  * Some events are ignored for purpose; and need not be interpreted as
  * "unhandled events"
  */
@@ -2578,6 +2579,7 @@  int wmi_update_ft_ies(struct wil6210_vif *vif, u16 ie_len, const void *ie)
 
 /**
  * wmi_rxon - turn radio on/off
+ * @wil:	driver data
  * @on:		turn on if true, off otherwise
  *
  * Only switch radio. Channel should be set separately.