diff mbox series

[net,v4] net: ethernet: ti: cpsw_new: fix error handling in cpsw_ndo_vlan_rx_kill_vid()

Message ID 20200827132118.31768-1-m-karicheri2@ti.com
State Superseded
Headers show
Series [net,v4] net: ethernet: ti: cpsw_new: fix error handling in cpsw_ndo_vlan_rx_kill_vid() | expand

Commit Message

Murali Karicheri Aug. 27, 2020, 1:21 p.m. UTC
This patch fixes a bunch of issues in cpsw_ndo_vlan_rx_kill_vid()

 - pm_runtime_get_sync() returns non zero value. This results in
   non zero value return to caller which will be interpreted as error.
   So overwrite ret with zero.
 - If VID matches with port VLAN VID, then set error code.
 - Currently when VLAN interface is deleted, all of the VLAN mc addresses
   are removed from ALE table, however the return values from ale function
   calls are not checked. These functions can return error code -ENOENT.
   But that shouldn't happen in a normal case. So add error print to
   catch the situations so that these can be investigated and addressed.
   return zero in these cases as these are not real error case, but only
   serve to catch ALE table update related issues and help address the
   same in the driver.

Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac")
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>

---
 v4 - updated error message with name of the function failed.
 v3 - updated commit description to describe error check related to
      port vlan VID
 v2 - updated comments from Grygorii, also return error code if VID
 drivers/net/ethernet/ti/cpsw_new.c | 27 +++++++++++++++++++++------
 1 file changed, 21 insertions(+), 6 deletions(-)

-- 
2.17.1
diff mbox series

Patch

diff --git a/drivers/net/ethernet/ti/cpsw_new.c b/drivers/net/ethernet/ti/cpsw_new.c
index 8d0a2bc7128d..8ed78577cded 100644
--- a/drivers/net/ethernet/ti/cpsw_new.c
+++ b/drivers/net/ethernet/ti/cpsw_new.c
@@ -1032,19 +1032,34 @@  static int cpsw_ndo_vlan_rx_kill_vid(struct net_device *ndev,
 		return ret;
 	}
 
+	/* reset the return code as pm_runtime_get_sync() can return
+	 * non zero values as well.
+	 */
+	ret = 0;
 	for (i = 0; i < cpsw->data.slaves; i++) {
 		if (cpsw->slaves[i].ndev &&
-		    vid == cpsw->slaves[i].port_vlan)
+		    vid == cpsw->slaves[i].port_vlan) {
+			ret = -EINVAL;
 			goto err;
+		}
 	}
 
 	dev_dbg(priv->dev, "removing vlanid %d from vlan filter\n", vid);
-	cpsw_ale_del_vlan(cpsw->ale, vid, 0);
-	cpsw_ale_del_ucast(cpsw->ale, priv->mac_addr,
-			   HOST_PORT_NUM, ALE_VLAN, vid);
-	cpsw_ale_del_mcast(cpsw->ale, priv->ndev->broadcast,
-			   0, ALE_VLAN, vid);
+	ret = cpsw_ale_del_vlan(cpsw->ale, vid, 0);
+	if (ret)
+		dev_err(priv->dev, "cpsw_ale_del_vlan() failed: ret %d\n", ret);
+	ret = cpsw_ale_del_ucast(cpsw->ale, priv->mac_addr,
+				 HOST_PORT_NUM, ALE_VLAN, vid);
+	if (ret)
+		dev_err(priv->dev, "cpsw_ale_del_ucast() failed: ret %d\n",
+			ret);
+	ret = cpsw_ale_del_mcast(cpsw->ale, priv->ndev->broadcast,
+				 0, ALE_VLAN, vid);
+	if (ret)
+		dev_err(priv->dev, "cpsw_ale_del_mcast failed. ret %d\n",
+			ret);
 	cpsw_ale_flush_multicast(cpsw->ale, ALE_PORT_HOST, vid);
+	ret = 0;
 err:
 	pm_runtime_put(cpsw->dev);
 	return ret;