diff mbox series

[4/6] arm64: dts: qcom: qrb5165-rb5: Add onboard LED support

Message ID 20200904063637.28632-5-manivannan.sadhasivam@linaro.org
State New
Headers show
Series Add initial support for Qualcomm RB5 platform | expand

Commit Message

Manivannan Sadhasivam Sept. 4, 2020, 6:36 a.m. UTC 
Only User4, WLAN and BT LEDs are added for now. These GPIOs are coming
from PM8150. Rest are coming from LPG block which is not supported yet!

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

---
 arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 26 ++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

-- 
2.17.1
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index f201e064b3e7..312316e23298 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -32,6 +32,32 @@ 
 		regulator-always-on;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		user4 {
+			label = "green:user4";
+			gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "panic-indicator";
+			default-state = "off";
+		};
+
+		wlan {
+			label = "yellow:wlan";
+			gpios = <&pm8150_gpios 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		bt {
+			label = "blue:bt";
+			gpios = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+
+	};
+
 	vbat: vbat-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "VBAT";