diff mbox series

[v2,5/6] arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function

Message ID 20200907145213.30788-6-rogerq@ti.com
State Superseded
Headers show
Series None | expand

Commit Message

Roger Quadros Sept. 7, 2020, 2:52 p.m. UTC
From: Kishon Vijay Abraham I <kishon@ti.com>


First two lanes of SERDES is connected to PCIe, third lane is
connected to QSGMII and the last lane is connected to USB. However,
Cadence torrent SERDES doesn't support more than 2 protocols
at the same time. Configure it only for PCIe and QSGMII.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Signed-off-by: Roger Quadros <rogerq@ti.com>

---
 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 6 ++++++
 1 file changed, 6 insertions(+)

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 8e534ef8a3f5..0ecaba600704 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -6,6 +6,7 @@ 
 /dts-v1/;
 
 #include "k3-j7200-som-p0.dtsi"
+#include <dt-bindings/mux/mux-j7200-wiz.h>
 
 / {
 	chosen {
@@ -139,3 +140,8 @@ 
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
+
+&serdes_ln_ctrl {
+	idle-states = <SERDES0_LANE0_PCIE1_LANE0>, <SERDES0_LANE1_PCIE1_LANE1>,
+		      <SERDES0_LANE2_QSGMII_LANE1>, <SERDES0_LANE3_IP4_UNUSED>;
+};