diff mbox series

[next,3/6] ARM: dts: beagle-x15: switch to new cpsw switch drv

Message ID 20200907202125.22943-4-grygorii.strashko@ti.com
State New
Headers show
Series ARM: dts: am57xx/dra7x: switch to new cpsw switch drv | expand

Commit Message

Grygorii Strashko Sept. 7, 2020, 8:21 p.m. UTC
Switch all TI AM5728 BeagleBoard-X15 boards to use new cpsw switch driver.
Those boards have 2 Ext. port wired and configured in dual_mac mode by
default. Hence, dual_mac mode has been preserved the same way between
legacy and new driver it's safe to switch drivers.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>

---
 arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

-- 
2.17.1
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index b3a0206ebd6c..79338fb7dbee 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -451,7 +451,7 @@ 
 			      <&dra7_pmx_core 0x3f8>;
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy0: ethernet-phy@1 {
 		reg = <1>;
 	};
@@ -461,21 +461,20 @@ 
 	};
 };
 
-&mac {
+&mac_sw {
 	status = "okay";
-	dual_emac;
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-rxid";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii-rxid";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 };
 
 &mmc1 {