diff mbox series

ASoC: fsl-asoc-card: Get "extal" clock rate by clk_get_rate

Message ID 1596699585-27429-1-git-send-email-shengjiu.wang@nxp.com
State Accepted
Commit a8fd5ca8016948a611bff62b0990ade9e1f8e83c
Headers show
Series ASoC: fsl-asoc-card: Get "extal" clock rate by clk_get_rate | expand

Commit Message

Shengjiu Wang Aug. 6, 2020, 7:39 a.m. UTC 
On some platform(.e.g. i.MX8QM MEK), the "extal" clock is different
with the mclk of codec, then the clock rate is also different.
So it is better to get clock rate of "extal" rate by clk_get_rate,
don't reuse the clock rate of mclk.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
 sound/soc/fsl/fsl-asoc-card.c | 7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series

Patch

diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c
index 52adedc03245..2c92a5efad61 100644
--- a/sound/soc/fsl/fsl-asoc-card.c
+++ b/sound/soc/fsl/fsl-asoc-card.c
@@ -696,6 +696,13 @@  static int fsl_asoc_card_probe(struct platform_device *pdev)
 			goto asrc_fail;
 		}
 	} else if (of_node_name_eq(cpu_np, "esai")) {
+		struct clk *esai_clk = clk_get(&cpu_pdev->dev, "extal");
+
+		if (!IS_ERR(esai_clk)) {
+			priv->cpu_priv.sysclk_freq[TX] = clk_get_rate(esai_clk);
+			priv->cpu_priv.sysclk_freq[RX] = clk_get_rate(esai_clk);
+			clk_put(esai_clk);
+		}
 		priv->cpu_priv.sysclk_id[1] = ESAI_HCKT_EXTAL;
 		priv->cpu_priv.sysclk_id[0] = ESAI_HCKR_EXTAL;
 	} else if (of_node_name_eq(cpu_np, "sai")) {