diff mbox series

[v2,5/6] input: atc260x: Add onkey driver for ATC260x PMICs

Message ID aec6ea5cfc9bf820cb4bb4a92297d2eecf6d285d.1598043782.git.cristian.ciocaltea@gmail.com
State New
Headers show
Series [v2,1/6] dt-bindings: mfd: Add Actions Semi ATC260x PMIC binding | expand

Commit Message

Cristian Ciocaltea Aug. 21, 2020, 10:19 p.m. UTC
The Actions Semi ATC260x PMICs are able to manage an onkey button.
This driver exposes the ATC260x onkey as an input device. It can also
be configured to force a system reset on a long key-press with an
adjustable duration.

The currently supported chip variants are ATC2603C and ATC2609A.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
---
 drivers/input/misc/Kconfig         |  11 ++
 drivers/input/misc/Makefile        |   2 +-
 drivers/input/misc/atc260x-onkey.c | 304 +++++++++++++++++++++++++++++
 3 files changed, 316 insertions(+), 1 deletion(-)
 create mode 100644 drivers/input/misc/atc260x-onkey.c

Comments

Cristian Ciocaltea Sept. 29, 2020, 9:46 p.m. UTC | #1
Hi Dmitry,

On Tue, Sep 29, 2020 at 01:35:54PM -0700, Dmitry Torokhov wrote:
> Hi Cristian,

> 

> On Fri, Sep 18, 2020 at 01:35:03PM +0300, Cristian Ciocaltea wrote:

> > Hi Dmitry,

> > 

> > Thanks for the review!

> > 

> > On Mon, Sep 14, 2020 at 02:09:41PM -0700, Dmitry Torokhov wrote:

> > > Hi Cristian,

> > > 

> > > On Sat, Aug 22, 2020 at 01:19:51AM +0300, Cristian Ciocaltea wrote:

> > > > The Actions Semi ATC260x PMICs are able to manage an onkey button.

> > > > This driver exposes the ATC260x onkey as an input device. It can also

> > > > be configured to force a system reset on a long key-press with an

> > > > adjustable duration.

> > > > 

> > > > The currently supported chip variants are ATC2603C and ATC2609A.

> > > > 

> > > > Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>

> > > > ---

> > > >  drivers/input/misc/Kconfig         |  11 ++

> > > >  drivers/input/misc/Makefile        |   2 +-

> > > >  drivers/input/misc/atc260x-onkey.c | 304 +++++++++++++++++++++++++++++

> > > >  3 files changed, 316 insertions(+), 1 deletion(-)

> > > >  create mode 100644 drivers/input/misc/atc260x-onkey.c

> > > > 

> > > > diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig

> > > > index 362e8a01980c..9e297ebdea57 100644

> > > > --- a/drivers/input/misc/Kconfig

> > > > +++ b/drivers/input/misc/Kconfig

> > > > @@ -83,6 +83,17 @@ config INPUT_ARIZONA_HAPTICS

> > > >  	  To compile this driver as a module, choose M here: the

> > > >  	  module will be called arizona-haptics.

> > > >  

> > > > +config INPUT_ATC260X_ONKEY

> > > > +	tristate "Actions Semi ATC260x PMIC ONKEY"

> > > > +	depends on MFD_ATC260X

> > > > +	help

> > > > +	  Support the ONKEY of ATC260x PMICs as an input device reporting

> > > > +	  power button status. ONKEY can be used to wakeup from low power

> > > > +	  modes and force a reset on long press.

> > > > +

> > > > +	  To compile this driver as a module, choose M here: the

> > > > +	  module will be called atc260x-onkey.

> > > > +

> > > >  config INPUT_ATMEL_CAPTOUCH

> > > >  	tristate "Atmel Capacitive Touch Button Driver"

> > > >  	depends on OF || COMPILE_TEST

> > > > diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile

> > > > index a48e5f2d859d..7f854c6ecefa 100644

> > > > --- a/drivers/input/misc/Makefile

> > > > +++ b/drivers/input/misc/Makefile

> > > > @@ -16,6 +16,7 @@ obj-$(CONFIG_INPUT_ADXL34X_I2C)		+= adxl34x-i2c.o

> > > >  obj-$(CONFIG_INPUT_ADXL34X_SPI)		+= adxl34x-spi.o

> > > >  obj-$(CONFIG_INPUT_APANEL)		+= apanel.o

> > > >  obj-$(CONFIG_INPUT_ARIZONA_HAPTICS)	+= arizona-haptics.o

> > > > +obj-$(CONFIG_INPUT_ATC260X_ONKEY)	+= atc260x-onkey.o

> > > >  obj-$(CONFIG_INPUT_ATI_REMOTE2)		+= ati_remote2.o

> > > >  obj-$(CONFIG_INPUT_ATLAS_BTNS)		+= atlas_btns.o

> > > >  obj-$(CONFIG_INPUT_ATMEL_CAPTOUCH)	+= atmel_captouch.o

> > > > @@ -84,4 +85,3 @@ obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o

> > > >  obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND)	+= xen-kbdfront.o

> > > >  obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o

> > > >  obj-$(CONFIG_INPUT_IDEAPAD_SLIDEBAR)	+= ideapad_slidebar.o

> > > > -

> > > > diff --git a/drivers/input/misc/atc260x-onkey.c b/drivers/input/misc/atc260x-onkey.c

> > > > new file mode 100644

> > > > index 000000000000..7caec7d6f9ac

> > > > --- /dev/null

> > > > +++ b/drivers/input/misc/atc260x-onkey.c

> > > > @@ -0,0 +1,304 @@

> > > > +// SPDX-License-Identifier: GPL-2.0+

> > > > +/*

> > > > + * Onkey driver for Actions Semi ATC260x PMICs.

> > > > + *

> > > > + * Copyright (c) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>

> > > > + */

> > > > +

> > > > +#include <linux/bitfield.h>

> > > > +#include <linux/input.h>

> > > > +#include <linux/interrupt.h>

> > > > +#include <linux/mfd/atc260x/core.h>

> > > > +#include <linux/module.h>

> > > > +#include <linux/of.h>

> > > > +#include <linux/platform_device.h>

> > > > +#include <linux/regmap.h>

> > > > +

> > > > +/* <2s for short press, >2s for long press */

> > > > +#define KEY_PRESS_TIME_SEC	2

> > > > +

> > > > +/* Driver internals */

> > > > +enum atc260x_onkey_reset_status {

> > > > +	KEY_RESET_HW_DEFAULT,

> > > > +	KEY_RESET_DISABLED,

> > > > +	KEY_RESET_USER_SEL,

> > > > +};

> > > > +

> > > > +struct atc260x_onkey_params {

> > > > +	u32 reg_int_ctl;

> > > > +	u32 kdwn_state_bm;

> > > > +	u32 long_int_pnd_bm;

> > > > +	u32 short_int_pnd_bm;

> > > > +	u32 kdwn_int_pnd_bm;

> > > > +	u32 press_int_en_bm;

> > > > +	u32 kdwn_int_en_bm;

> > > > +	u32 press_time_bm;

> > > > +	u32 reset_en_bm;

> > > > +	u32 reset_time_bm;

> > > > +};

> > > > +

> > > > +struct atc260x_onkey {

> > > > +	struct atc260x *atc260x;

> > > > +	const struct atc260x_onkey_params *params;

> > > > +	struct input_dev *input_dev;

> > > > +	struct delayed_work work;

> > > > +};

> > > > +

> > > > +static const struct atc260x_onkey_params atc2603c_onkey_params = {

> > > > +	.reg_int_ctl		= ATC2603C_PMU_SYS_CTL2,

> > > > +	.long_int_pnd_bm	= ATC2603C_PMU_SYS_CTL2_ONOFF_LONG_PRESS,

> > > > +	.short_int_pnd_bm	= ATC2603C_PMU_SYS_CTL2_ONOFF_SHORT_PRESS,

> > > > +	.kdwn_int_pnd_bm	= ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_PD,

> > > > +	.press_int_en_bm	= ATC2603C_PMU_SYS_CTL2_ONOFF_INT_EN,

> > > > +	.kdwn_int_en_bm		= ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_INT_EN,

> > > > +	.kdwn_state_bm		= ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS,

> > > > +	.press_time_bm		= ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_TIME,

> > > > +	.reset_en_bm		= ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_RESET_EN,

> > > > +	.reset_time_bm		= ATC2603C_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL,

> > > > +};

> > > > +

> > > > +static const struct atc260x_onkey_params atc2609a_onkey_params = {

> > > > +	.reg_int_ctl		= ATC2609A_PMU_SYS_CTL2,

> > > > +	.long_int_pnd_bm	= ATC2609A_PMU_SYS_CTL2_ONOFF_LONG_PRESS,

> > > > +	.short_int_pnd_bm	= ATC2609A_PMU_SYS_CTL2_ONOFF_SHORT_PRESS,

> > > > +	.kdwn_int_pnd_bm	= ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_PD,

> > > > +	.press_int_en_bm	= ATC2609A_PMU_SYS_CTL2_ONOFF_LSP_INT_EN,

> > > > +	.kdwn_int_en_bm		= ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_INT_EN,

> > > > +	.kdwn_state_bm		= ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS,

> > > > +	.press_time_bm		= ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_TIME,

> > > > +	.reset_en_bm		= ATC2609A_PMU_SYS_CTL2_ONOFF_RESET_EN,

> > > > +	.reset_time_bm		= ATC2609A_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL,

> > > > +};

> > > > +

> > > > +static int atc2603x_onkey_hw_init(struct atc260x_onkey *onkey,

> > > > +				  enum atc260x_onkey_reset_status reset_status,

> > > > +				  u32 reset_time, u32 press_time)

> > > > +{

> > > > +	u32 reg_bm, reg_val;

> > > > +

> > > > +	reg_bm = onkey->params->long_int_pnd_bm |

> > > > +		 onkey->params->short_int_pnd_bm |

> > > > +		 onkey->params->kdwn_int_pnd_bm |

> > > > +		 onkey->params->press_int_en_bm |

> > > > +		 onkey->params->kdwn_int_en_bm;

> > > > +

> > > > +	reg_val = reg_bm | press_time;

> > > > +	reg_bm |= onkey->params->press_time_bm;

> > > > +

> > > > +	if (reset_status == KEY_RESET_DISABLED) {

> > > > +		reg_bm |= onkey->params->reset_en_bm;

> > > > +	} else if (reset_status == KEY_RESET_USER_SEL) {

> > > > +		reg_bm |= onkey->params->reset_en_bm |

> > > > +			  onkey->params->reset_time_bm;

> > > > +		reg_val |= onkey->params->reset_en_bm | reset_time;

> > > > +	}

> > > > +

> > > > +	return regmap_update_bits(onkey->atc260x->regmap,

> > > > +				  onkey->params->reg_int_ctl, reg_bm, reg_val);

> > > > +}

> > > > +

> > > > +static void atc260x_onkey_query(struct atc260x_onkey *onkey)

> > > > +{

> > > > +	u32 reg_bits;

> > > > +	int ret, key_down;

> > > > +

> > > > +	ret = regmap_read(onkey->atc260x->regmap,

> > > > +			  onkey->params->reg_int_ctl, &key_down);

> > > > +	if (ret) {

> > > > +		key_down = 1;

> > > > +		dev_err(onkey->atc260x->dev,

> > > > +			"Failed to read onkey status: %d\n", ret);

> > > > +	} else {

> > > > +		key_down &= onkey->params->kdwn_state_bm;

> > > > +	}

> > > > +

> > > > +	/*

> > > > +	 * The hardware generates interrupt only when the onkey pin is

> > > > +	 * asserted. Hence, the deassertion of the pin is simulated through

> > > > +	 * work queue.

> > > > +	 */

> > > > +	if (key_down) {

> > > > +		schedule_delayed_work(&onkey->work, msecs_to_jiffies(200));

> > > > +		return;

> > > > +	}

> > > > +

> > > > +	/*

> > > > +	 * The key-down status bit is cleared when the On/Off button

> > > > +	 * is released.

> > > > +	 */

> > > > +	input_report_key(onkey->input_dev, KEY_POWER, 0);

> > > > +	input_sync(onkey->input_dev);

> > > > +

> > > > +	reg_bits = onkey->params->long_int_pnd_bm |

> > > > +		   onkey->params->short_int_pnd_bm |

> > > > +		   onkey->params->kdwn_int_pnd_bm |

> > > > +		   onkey->params->press_int_en_bm |

> > > > +		   onkey->params->kdwn_int_en_bm;

> > > > +

> > > > +	/* Clear key press pending events and enable key press interrupts. */

> > > > +	regmap_update_bits(onkey->atc260x->regmap, onkey->params->reg_int_ctl,

> > > > +			   reg_bits, reg_bits);

> > > > +}

> > > > +

> > > > +static void atc260x_onkey_work(struct work_struct *work)

> > > > +{

> > > > +	struct atc260x_onkey *onkey = container_of(work, struct atc260x_onkey,

> > > > +						   work.work);

> > > > +	atc260x_onkey_query(onkey);

> > > > +}

> > > > +

> > > > +static irqreturn_t atc260x_onkey_irq(int irq, void *data)

> > > > +{

> > > > +	struct atc260x_onkey *onkey = data;

> > > > +	int ret;

> > > > +

> > > > +	/* Disable key press interrupts. */

> > > > +	ret = regmap_update_bits(onkey->atc260x->regmap,

> > > > +				 onkey->params->reg_int_ctl,

> > > > +				 onkey->params->press_int_en_bm |

> > > > +				 onkey->params->kdwn_int_en_bm, 0);

> > > > +	if (ret)

> > > > +		dev_err(onkey->atc260x->dev,

> > > > +			"Failed to disable interrupts: %d\n", ret);

> > > > +

> > > > +	input_report_key(onkey->input_dev, KEY_POWER, 1);

> > > > +	input_sync(onkey->input_dev);

> > > > +

> > > > +	atc260x_onkey_query(onkey);

> > > > +

> > > > +	return IRQ_HANDLED;

> > > > +}

> > > > +

> > > > +static int atc260x_onkey_probe(struct platform_device *pdev)

> > > > +{

> > > > +	struct atc260x *atc260x = dev_get_drvdata(pdev->dev.parent);

> > > > +	struct atc260x_onkey *onkey;

> > > > +	struct input_dev *input_dev;

> > > > +	enum atc260x_onkey_reset_status reset_status;

> > > > +	u32 press_time = KEY_PRESS_TIME_SEC, reset_time = 0;

> > > > +	int val, irq, ret;

> > > > +

> > > > +	if (!pdev->dev.of_node)

> > > > +		return -ENXIO;

> > > 

> > > Why is this needed?

> > 

> > The idea was to allow the user enable/disable the ONKEY functionality

> > of the MFD device via the 'onkey' DTS node. So if this node is not

> > present, the driver will not be loaded.

> > 

> > Is there a better/recommended way to handle this scenario?

> 

> I believe the best way is not to create correspnding platform device if

> functionality is disabled. So the logic shoudl go into MFD piece.


Thanks for the suggestion, I will move the logic to MFD core.

> > 

> > > > +

> > > > +	onkey = devm_kzalloc(&pdev->dev, sizeof(*onkey), GFP_KERNEL);

> > > > +	if (!onkey)

> > > > +		return -ENOMEM;

> > > > +

> > > > +	ret = device_property_read_u32(&pdev->dev,

> > > > +				       "actions,reset-time-sec", &val);

> > > 

> > > Call this "error" please.

> > 

> > Would something like bellow suffice?

> > 

> > 	if (ret) {

> > 		dev_err(&pdev->dev, "Failed to read actions,reset-time-sec\n");

> > 		return ret;

> > 	}

> 

> 

> I meant

> 

> 	error = device_property_read_u32(&pdev->dev,

> 					 "actions,reset-time-sec", &val);

> 	if (error) {

> 		reset_status = KEY_RESET_HW_DEFAULT;

> 	}


Got it now.
 
> > 

> > > > +	if (ret) {

> > > > +		reset_status = KEY_RESET_HW_DEFAULT;

> > > > +	} else if (val) {

> > > > +		if (val < 6 || val > 12) {

> > > > +			dev_err(&pdev->dev, "actions,reset-time-sec out of range\n");

> > > > +			return -EINVAL;

> > > > +		}

> > > > +

> > > > +		reset_status = KEY_RESET_USER_SEL;

> > > > +		reset_time = (val - 6) / 2;

> > > > +	} else {

> > > > +		reset_status = KEY_RESET_DISABLED;

> > > > +		dev_info(&pdev->dev, "Disabled reset on long-press\n");

> 

> dev_dbg();


Acknowledged.

> > > > +	}

> > > > +

> > > > +	switch (atc260x->ic_type) {

> > > > +	case ATC2603C:

> > > > +		onkey->params = &atc2603c_onkey_params;

> > > > +		press_time = FIELD_PREP(ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_TIME,

> > > > +					press_time);

> > > > +		reset_time = FIELD_PREP(ATC2603C_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL,

> > > > +					reset_time);

> > > > +		break;

> > > > +	case ATC2609A:

> > > > +		onkey->params = &atc2609a_onkey_params;

> > > > +		press_time = FIELD_PREP(ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_TIME,

> > > > +					press_time);

> > > > +		reset_time = FIELD_PREP(ATC2609A_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL,

> > > > +					reset_time);

> > > > +		break;

> > > > +	default:

> > > > +		dev_err(&pdev->dev,

> > > > +			"OnKey not supported for ATC260x PMIC type: %u\n",

> > > > +			atc260x->ic_type);

> > > > +		return -EINVAL;

> > > > +	}

> > > > +

> > > > +	input_dev = devm_input_allocate_device(&pdev->dev);

> > > > +	if (!input_dev) {

> > > > +		dev_err(&pdev->dev, "Failed to allocate input device\n");

> > > > +		return -ENOMEM;

> > > > +	}

> > > > +

> > > > +	onkey->input_dev = input_dev;

> > > > +	onkey->atc260x = atc260x;

> > > > +

> > > > +	input_dev->name = "atc260x-onkey";

> > > > +	input_dev->phys = "atc260x-onkey/input0";

> > > > +	input_dev->evbit[0] = BIT_MASK(EV_KEY);

> > > 

> > > Not needed.

> > 

> > Done.

> > 

> > > > +	input_set_capability(input_dev, EV_KEY, KEY_POWER);

> > > > +

> > > > +	INIT_DELAYED_WORK(&onkey->work, atc260x_onkey_work);

> > > > +

> > > > +	irq = platform_get_irq(pdev, 0);

> > > > +	if (irq < 0)

> > > > +		return irq;

> > > > +

> > > > +	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,

> > > > +					atc260x_onkey_irq,

> > > > +					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,

> > > 

> > > Do we need to force the trigger type? Can we rely on the parent to

> > > configure it as needed?

> > 

> > Done, I removed the trigger type enforcement.

> > 

> > > > +					dev_name(&pdev->dev), onkey);

> > > > +	if (ret) {

> > > > +		dev_err(&pdev->dev,

> > > > +			"Failed to register IRQ %d: %d\n", irq, ret);

> > > > +		return ret;

> > > > +	}

> > > > +

> > > > +	ret = input_register_device(input_dev);

> > > > +	if (ret) {

> > > > +		dev_err(&pdev->dev,

> > > > +			"Failed to register input device: %d\n", ret);

> > > > +		return ret;

> > > > +	}

> > > > +

> > > > +	ret = atc2603x_onkey_hw_init(onkey, reset_status,

> > > > +				     reset_time, press_time);

> > > > +	if (ret)

> > > > +		return ret;

> > > > +

> > > > +	platform_set_drvdata(pdev, onkey);

> > > > +	device_init_wakeup(&pdev->dev, true);

> > > > +

> > > > +	return 0;

> > > > +}

> > > > +

> > > > +static int atc260x_onkey_remove(struct platform_device *pdev)

> > > > +{

> > > > +	struct atc260x_onkey *onkey = platform_get_drvdata(pdev);

> > > > +

> > > > +	cancel_delayed_work_sync(&onkey->work);

> > > 

> > > This is racy. Past this point the interrupts are not disabled, so if key

> > > happens to be pressed you will re-schedule the work and it will go BOOM.

> > > 

> > > You are using threaded interrupt. Maybe consider sleeping and

> > > re-checking the key status right there.

> > 

> > I've seen this approach in a few drivers: da9055_onkey.c,

> > palmas-pwrbutton.c, wm831x-on.c

> > 

> > I noticed they also call 'free_irq()' right before

> > 'cancel_delayed_work_sync()'. Would this help mitigate the racing issue?

> 

> Yes, but this messes up with devm releasing resources.


Indeed, I missed that.

> Another option is to implement open/close and call enable_irq() in open

> and disable_irq/cancel_work_sync in close.


I'm going to try this, thanks for the suggestion!

> Thanks.

> 

> -- 

> Dmitry


Kind regards,
Cristi
diff mbox series

Patch

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 362e8a01980c..9e297ebdea57 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -83,6 +83,17 @@  config INPUT_ARIZONA_HAPTICS
 	  To compile this driver as a module, choose M here: the
 	  module will be called arizona-haptics.
 
+config INPUT_ATC260X_ONKEY
+	tristate "Actions Semi ATC260x PMIC ONKEY"
+	depends on MFD_ATC260X
+	help
+	  Support the ONKEY of ATC260x PMICs as an input device reporting
+	  power button status. ONKEY can be used to wakeup from low power
+	  modes and force a reset on long press.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called atc260x-onkey.
+
 config INPUT_ATMEL_CAPTOUCH
 	tristate "Atmel Capacitive Touch Button Driver"
 	depends on OF || COMPILE_TEST
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index a48e5f2d859d..7f854c6ecefa 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -16,6 +16,7 @@  obj-$(CONFIG_INPUT_ADXL34X_I2C)		+= adxl34x-i2c.o
 obj-$(CONFIG_INPUT_ADXL34X_SPI)		+= adxl34x-spi.o
 obj-$(CONFIG_INPUT_APANEL)		+= apanel.o
 obj-$(CONFIG_INPUT_ARIZONA_HAPTICS)	+= arizona-haptics.o
+obj-$(CONFIG_INPUT_ATC260X_ONKEY)	+= atc260x-onkey.o
 obj-$(CONFIG_INPUT_ATI_REMOTE2)		+= ati_remote2.o
 obj-$(CONFIG_INPUT_ATLAS_BTNS)		+= atlas_btns.o
 obj-$(CONFIG_INPUT_ATMEL_CAPTOUCH)	+= atmel_captouch.o
@@ -84,4 +85,3 @@  obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o
 obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND)	+= xen-kbdfront.o
 obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
 obj-$(CONFIG_INPUT_IDEAPAD_SLIDEBAR)	+= ideapad_slidebar.o
-
diff --git a/drivers/input/misc/atc260x-onkey.c b/drivers/input/misc/atc260x-onkey.c
new file mode 100644
index 000000000000..7caec7d6f9ac
--- /dev/null
+++ b/drivers/input/misc/atc260x-onkey.c
@@ -0,0 +1,304 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Onkey driver for Actions Semi ATC260x PMICs.
+ *
+ * Copyright (c) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/atc260x/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* <2s for short press, >2s for long press */
+#define KEY_PRESS_TIME_SEC	2
+
+/* Driver internals */
+enum atc260x_onkey_reset_status {
+	KEY_RESET_HW_DEFAULT,
+	KEY_RESET_DISABLED,
+	KEY_RESET_USER_SEL,
+};
+
+struct atc260x_onkey_params {
+	u32 reg_int_ctl;
+	u32 kdwn_state_bm;
+	u32 long_int_pnd_bm;
+	u32 short_int_pnd_bm;
+	u32 kdwn_int_pnd_bm;
+	u32 press_int_en_bm;
+	u32 kdwn_int_en_bm;
+	u32 press_time_bm;
+	u32 reset_en_bm;
+	u32 reset_time_bm;
+};
+
+struct atc260x_onkey {
+	struct atc260x *atc260x;
+	const struct atc260x_onkey_params *params;
+	struct input_dev *input_dev;
+	struct delayed_work work;
+};
+
+static const struct atc260x_onkey_params atc2603c_onkey_params = {
+	.reg_int_ctl		= ATC2603C_PMU_SYS_CTL2,
+	.long_int_pnd_bm	= ATC2603C_PMU_SYS_CTL2_ONOFF_LONG_PRESS,
+	.short_int_pnd_bm	= ATC2603C_PMU_SYS_CTL2_ONOFF_SHORT_PRESS,
+	.kdwn_int_pnd_bm	= ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_PD,
+	.press_int_en_bm	= ATC2603C_PMU_SYS_CTL2_ONOFF_INT_EN,
+	.kdwn_int_en_bm		= ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_INT_EN,
+	.kdwn_state_bm		= ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS,
+	.press_time_bm		= ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_TIME,
+	.reset_en_bm		= ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_RESET_EN,
+	.reset_time_bm		= ATC2603C_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL,
+};
+
+static const struct atc260x_onkey_params atc2609a_onkey_params = {
+	.reg_int_ctl		= ATC2609A_PMU_SYS_CTL2,
+	.long_int_pnd_bm	= ATC2609A_PMU_SYS_CTL2_ONOFF_LONG_PRESS,
+	.short_int_pnd_bm	= ATC2609A_PMU_SYS_CTL2_ONOFF_SHORT_PRESS,
+	.kdwn_int_pnd_bm	= ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_PD,
+	.press_int_en_bm	= ATC2609A_PMU_SYS_CTL2_ONOFF_LSP_INT_EN,
+	.kdwn_int_en_bm		= ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_INT_EN,
+	.kdwn_state_bm		= ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS,
+	.press_time_bm		= ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_TIME,
+	.reset_en_bm		= ATC2609A_PMU_SYS_CTL2_ONOFF_RESET_EN,
+	.reset_time_bm		= ATC2609A_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL,
+};
+
+static int atc2603x_onkey_hw_init(struct atc260x_onkey *onkey,
+				  enum atc260x_onkey_reset_status reset_status,
+				  u32 reset_time, u32 press_time)
+{
+	u32 reg_bm, reg_val;
+
+	reg_bm = onkey->params->long_int_pnd_bm |
+		 onkey->params->short_int_pnd_bm |
+		 onkey->params->kdwn_int_pnd_bm |
+		 onkey->params->press_int_en_bm |
+		 onkey->params->kdwn_int_en_bm;
+
+	reg_val = reg_bm | press_time;
+	reg_bm |= onkey->params->press_time_bm;
+
+	if (reset_status == KEY_RESET_DISABLED) {
+		reg_bm |= onkey->params->reset_en_bm;
+	} else if (reset_status == KEY_RESET_USER_SEL) {
+		reg_bm |= onkey->params->reset_en_bm |
+			  onkey->params->reset_time_bm;
+		reg_val |= onkey->params->reset_en_bm | reset_time;
+	}
+
+	return regmap_update_bits(onkey->atc260x->regmap,
+				  onkey->params->reg_int_ctl, reg_bm, reg_val);
+}
+
+static void atc260x_onkey_query(struct atc260x_onkey *onkey)
+{
+	u32 reg_bits;
+	int ret, key_down;
+
+	ret = regmap_read(onkey->atc260x->regmap,
+			  onkey->params->reg_int_ctl, &key_down);
+	if (ret) {
+		key_down = 1;
+		dev_err(onkey->atc260x->dev,
+			"Failed to read onkey status: %d\n", ret);
+	} else {
+		key_down &= onkey->params->kdwn_state_bm;
+	}
+
+	/*
+	 * The hardware generates interrupt only when the onkey pin is
+	 * asserted. Hence, the deassertion of the pin is simulated through
+	 * work queue.
+	 */
+	if (key_down) {
+		schedule_delayed_work(&onkey->work, msecs_to_jiffies(200));
+		return;
+	}
+
+	/*
+	 * The key-down status bit is cleared when the On/Off button
+	 * is released.
+	 */
+	input_report_key(onkey->input_dev, KEY_POWER, 0);
+	input_sync(onkey->input_dev);
+
+	reg_bits = onkey->params->long_int_pnd_bm |
+		   onkey->params->short_int_pnd_bm |
+		   onkey->params->kdwn_int_pnd_bm |
+		   onkey->params->press_int_en_bm |
+		   onkey->params->kdwn_int_en_bm;
+
+	/* Clear key press pending events and enable key press interrupts. */
+	regmap_update_bits(onkey->atc260x->regmap, onkey->params->reg_int_ctl,
+			   reg_bits, reg_bits);
+}
+
+static void atc260x_onkey_work(struct work_struct *work)
+{
+	struct atc260x_onkey *onkey = container_of(work, struct atc260x_onkey,
+						   work.work);
+	atc260x_onkey_query(onkey);
+}
+
+static irqreturn_t atc260x_onkey_irq(int irq, void *data)
+{
+	struct atc260x_onkey *onkey = data;
+	int ret;
+
+	/* Disable key press interrupts. */
+	ret = regmap_update_bits(onkey->atc260x->regmap,
+				 onkey->params->reg_int_ctl,
+				 onkey->params->press_int_en_bm |
+				 onkey->params->kdwn_int_en_bm, 0);
+	if (ret)
+		dev_err(onkey->atc260x->dev,
+			"Failed to disable interrupts: %d\n", ret);
+
+	input_report_key(onkey->input_dev, KEY_POWER, 1);
+	input_sync(onkey->input_dev);
+
+	atc260x_onkey_query(onkey);
+
+	return IRQ_HANDLED;
+}
+
+static int atc260x_onkey_probe(struct platform_device *pdev)
+{
+	struct atc260x *atc260x = dev_get_drvdata(pdev->dev.parent);
+	struct atc260x_onkey *onkey;
+	struct input_dev *input_dev;
+	enum atc260x_onkey_reset_status reset_status;
+	u32 press_time = KEY_PRESS_TIME_SEC, reset_time = 0;
+	int val, irq, ret;
+
+	if (!pdev->dev.of_node)
+		return -ENXIO;
+
+	onkey = devm_kzalloc(&pdev->dev, sizeof(*onkey), GFP_KERNEL);
+	if (!onkey)
+		return -ENOMEM;
+
+	ret = device_property_read_u32(&pdev->dev,
+				       "actions,reset-time-sec", &val);
+	if (ret) {
+		reset_status = KEY_RESET_HW_DEFAULT;
+	} else if (val) {
+		if (val < 6 || val > 12) {
+			dev_err(&pdev->dev, "actions,reset-time-sec out of range\n");
+			return -EINVAL;
+		}
+
+		reset_status = KEY_RESET_USER_SEL;
+		reset_time = (val - 6) / 2;
+	} else {
+		reset_status = KEY_RESET_DISABLED;
+		dev_info(&pdev->dev, "Disabled reset on long-press\n");
+	}
+
+	switch (atc260x->ic_type) {
+	case ATC2603C:
+		onkey->params = &atc2603c_onkey_params;
+		press_time = FIELD_PREP(ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_TIME,
+					press_time);
+		reset_time = FIELD_PREP(ATC2603C_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL,
+					reset_time);
+		break;
+	case ATC2609A:
+		onkey->params = &atc2609a_onkey_params;
+		press_time = FIELD_PREP(ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_TIME,
+					press_time);
+		reset_time = FIELD_PREP(ATC2609A_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL,
+					reset_time);
+		break;
+	default:
+		dev_err(&pdev->dev,
+			"OnKey not supported for ATC260x PMIC type: %u\n",
+			atc260x->ic_type);
+		return -EINVAL;
+	}
+
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!input_dev) {
+		dev_err(&pdev->dev, "Failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	onkey->input_dev = input_dev;
+	onkey->atc260x = atc260x;
+
+	input_dev->name = "atc260x-onkey";
+	input_dev->phys = "atc260x-onkey/input0";
+	input_dev->evbit[0] = BIT_MASK(EV_KEY);
+	input_set_capability(input_dev, EV_KEY, KEY_POWER);
+
+	INIT_DELAYED_WORK(&onkey->work, atc260x_onkey_work);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+					atc260x_onkey_irq,
+					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+					dev_name(&pdev->dev), onkey);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Failed to register IRQ %d: %d\n", irq, ret);
+		return ret;
+	}
+
+	ret = input_register_device(input_dev);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Failed to register input device: %d\n", ret);
+		return ret;
+	}
+
+	ret = atc2603x_onkey_hw_init(onkey, reset_status,
+				     reset_time, press_time);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, onkey);
+	device_init_wakeup(&pdev->dev, true);
+
+	return 0;
+}
+
+static int atc260x_onkey_remove(struct platform_device *pdev)
+{
+	struct atc260x_onkey *onkey = platform_get_drvdata(pdev);
+
+	cancel_delayed_work_sync(&onkey->work);
+
+	return 0;
+}
+
+static const struct of_device_id atc260x_onkey_of_match[] = {
+	{ .compatible = "actions,atc2603c-onkey" },
+	{ .compatible = "actions,atc2609a-onkey" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, atc260x_onkey_of_match);
+
+static struct platform_driver atc260x_onkey_driver = {
+	.probe	= atc260x_onkey_probe,
+	.remove	= atc260x_onkey_remove,
+	.driver	= {
+		.name = "atc260x-onkey",
+		.of_match_table = of_match_ptr(atc260x_onkey_of_match),
+	},
+};
+
+module_platform_driver(atc260x_onkey_driver);
+
+MODULE_DESCRIPTION("Onkey driver for ATC260x PMICs");
+MODULE_AUTHOR("Cristian Ciocaltea <cristian.ciocaltea@gmail.com>");
+MODULE_LICENSE("GPL");