diff mbox series

[v2,3/3] dt-bindings: touchscreen: Add binding for Novatek NT36xxx series driver

Message ID 20200927123542.553852-4-kholk11@gmail.com
State Superseded
Headers show
Series Add Novatek NT36xxx touchscreen driver | expand

Commit Message

AngeloGioacchino Del Regno Sept. 27, 2020, 12:35 p.m. UTC
From: AngeloGioacchino Del Regno <kholk11@gmail.com>

Add binding for the Novatek NT36xxx series touchscreen driver.

Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
---
 .../input/touchscreen/novatek,nt36xxx.yaml    | 56 +++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/novatek,nt36xxx.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/touchscreen/novatek,nt36xxx.yaml b/Documentation/devicetree/bindings/input/touchscreen/novatek,nt36xxx.yaml
new file mode 100644
index 000000000000..9f350f4e6d6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/novatek,nt36xxx.yaml
@@ -0,0 +1,56 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/novatek,nt36xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT36xxx series touchscreen controller Bindings
+
+maintainers:
+  - TBD
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - novatek,nt36xxx
+
+  reg:
+    enum: [ 0x62 ]
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpio:
+    maxItems: 1
+
+  vdd-supply:
+    description: Power supply regulator for VDD pin
+
+  vio-reg-name:
+    description: Power supply regulator on VDD-IO pin
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      nt36xxx@62 {
+        compatible = "novatek,nt36xxx";
+        reg = <0x62>;
+        interrupt-parent = <&tlmm>;
+        interrupts = <45 IRQ_TYPE_EDGE_RISING>;
+        reset-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+      };
+    };
+
+...