@@ -178,18 +178,6 @@ static void tmio_mmc_reset(struct tmio_mmc_host *host)
}
}
-static void tmio_mmc_hw_reset(struct mmc_host *mmc)
-{
- struct tmio_mmc_host *host = mmc_priv(mmc);
-
- host->reset(host);
-
- tmio_mmc_abort_dma(host);
-
- if (host->hw_reset)
- host->hw_reset(host);
-}
-
static void tmio_mmc_reset_work(struct work_struct *work)
{
struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host,
@@ -228,11 +216,12 @@ static void tmio_mmc_reset_work(struct work_struct *work)
spin_unlock_irqrestore(&host->lock, flags);
- tmio_mmc_hw_reset(host->mmc);
+ host->reset(host);
/* Ready for new calls */
host->mrq = NULL;
+ tmio_mmc_abort_dma(host);
mmc_request_done(host->mmc, mrq);
}
@@ -720,6 +709,14 @@ static int tmio_mmc_start_data(struct tmio_mmc_host *host,
return 0;
}
+static void tmio_mmc_hw_reset(struct mmc_host *mmc)
+{
+ struct tmio_mmc_host *host = mmc_priv(mmc);
+
+ if (host->hw_reset)
+ host->hw_reset(host);
+}
+
static int tmio_mmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
{
struct tmio_mmc_host *host = mmc_priv(mmc);
@@ -732,7 +729,7 @@ static int tmio_mmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
if (ret < 0) {
dev_warn(&host->pdev->dev, "Tuning procedure failed\n");
- tmio_mmc_hw_reset(mmc);
+ host->reset(host);
}
return ret;
@@ -1180,7 +1177,7 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
_host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;
_host->set_clock(_host, 0);
- tmio_mmc_hw_reset(mmc);
+ _host->reset(_host);
_host->sdcard_irq_mask = sd_ctrl_read16_and_16_as_32(_host, CTL_IRQ_MASK);
tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL);
@@ -1283,7 +1280,7 @@ int tmio_mmc_host_runtime_resume(struct device *dev)
struct tmio_mmc_host *host = dev_get_drvdata(dev);
tmio_mmc_clk_enable(host);
- tmio_mmc_hw_reset(host->mmc);
+ host->reset(host);
if (host->clk_cache)
host->set_clock(host, host->clk_cache);
This reverts commit a87852c6b8827b7fece78ae57d871d56e4348e30. It did fix the issue, but was building on top of already wrong assumptions. The driver missed that 'hw_reset' was only for resetting remote HW (card) and not for the IP core. Since we fixed that in a previous patch, we can now remove this patch to make it clear that 'reset' is for resetting the IP core only. Also, cancelling DMA will only be called when actually needed again. It will also allow for further cleanups and better readability. Note that in addition to the revert, the call in 'tmio_mmc_execute_tuning' will be converted, too, to maintain the current behaviour. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> --- drivers/mmc/host/tmio_mmc_core.c | 29 +++++++++++++---------------- 1 file changed, 13 insertions(+), 16 deletions(-)