diff mbox series

[RFT,21/25] ARM: dts: s5pv210: move fixed regulators under root node in Goni

Message ID 20200907161141.31034-22-krzk@kernel.org
State New
Headers show
Series ARM: dts: s5pv210: Cleanup - dtschema warnings | expand

Commit Message

Krzysztof Kozlowski Sept. 7, 2020, 4:11 p.m. UTC
The fixed regulators are kept under dedicated "regulators" node but this
causes multiple dtschema warnings:

  regulators: $nodename:0: 'regulators' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
  regulators: #size-cells:0:0: 0 is not one of [1, 2]
  regulators: fixed-regulator@0:reg:0: [0] is too short
  regulators: fixed-regulator@1:reg:0: [1] is too short
  regulators: fixed-regulator@2:reg:0: [2] is too short
  regulators: fixed-regulator@3:reg:0: [3] is too short

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/s5pv210-goni.dts | 64 +++++++++++++-----------------
 1 file changed, 27 insertions(+), 37 deletions(-)

Comments

Krzysztof Kozlowski Sept. 16, 2020, 5:16 p.m. UTC | #1
On Mon, Sep 07, 2020 at 06:11:37PM +0200, Krzysztof Kozlowski wrote:
> The fixed regulators are kept under dedicated "regulators" node but this
> causes multiple dtschema warnings:
> 
>   regulators: $nodename:0: 'regulators' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
>   regulators: #size-cells:0:0: 0 is not one of [1, 2]
>   regulators: fixed-regulator@0:reg:0: [0] is too short
>   regulators: fixed-regulator@1:reg:0: [1] is too short
>   regulators: fixed-regulator@2:reg:0: [2] is too short
>   regulators: fixed-regulator@3:reg:0: [3] is too short
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
>  arch/arm/boot/dts/s5pv210-goni.dts | 64 +++++++++++++-----------------

Applied.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts
index 20f1c2773805..eec6531e6ef8 100644
--- a/arch/arm/boot/dts/s5pv210-goni.dts
+++ b/arch/arm/boot/dts/s5pv210-goni.dts
@@ -42,46 +42,36 @@ 
 		clock-frequency = <32768>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vtf_reg: fixed-regulator@0 {
-			compatible = "regulator-fixed";
-			regulator-name = "V_TF_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			reg = <0>;
-			gpio = <&mp05 4 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	vtf_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_TF_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&mp05 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		pda_reg: fixed-regulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "VCC_1.8V_PDA";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			reg = <1>;
-		};
+	pda_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1.8V_PDA";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
 
-		bat_reg: fixed-regulator@2 {
-			compatible = "regulator-fixed";
-			regulator-name = "V_BAT";
-			regulator-min-microvolt = <3700000>;
-			regulator-max-microvolt = <3700000>;
-			reg = <2>;
-		};
+	bat_reg: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_BAT";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
 
-		tsp_reg: fixed-regulator@3 {
-			compatible = "regulator-fixed";
-			regulator-name = "TSP_VDD";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			reg = <3>;
-			gpio = <&gpj1 3 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	tsp_reg: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "TSP_VDD";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpj1 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	i2c_pmic: i2c-pmic {