@@ -649,26 +649,24 @@ static int lpuart32_poll_init(struct uart_port *port)
spin_lock_irqsave(&sport->port.lock, flags);
/* Disable Rx & Tx */
- lpuart32_write(&sport->port, UARTCTRL, 0);
+ lpuart32_write(&sport->port, 0, UARTCTRL);
temp = lpuart32_read(&sport->port, UARTFIFO);
/* Enable Rx and Tx FIFO */
- lpuart32_write(&sport->port, UARTFIFO,
- temp | UARTFIFO_RXFE | UARTFIFO_TXFE);
+ lpuart32_write(&sport->port, temp | UARTFIFO_RXFE | UARTFIFO_TXFE, UARTFIFO);
/* flush Tx and Rx FIFO */
- lpuart32_write(&sport->port, UARTFIFO,
- UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH);
+ lpuart32_write(&sport->port, UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH, UARTFIFO);
/* explicitly clear RDRF */
if (lpuart32_read(&sport->port, UARTSTAT) & UARTSTAT_RDRF) {
lpuart32_read(&sport->port, UARTDATA);
- lpuart32_write(&sport->port, UARTFIFO, UARTFIFO_RXUF);
+ lpuart32_write(&sport->port, UARTFIFO_RXUF, UARTFIFO);
}
/* Enable Rx and Tx */
- lpuart32_write(&sport->port, UARTCTRL, UARTCTRL_RE | UARTCTRL_TE);
+ lpuart32_write(&sport->port, UARTCTRL_RE | UARTCTRL_TE, UARTCTRL);
spin_unlock_irqrestore(&sport->port.lock, flags);
return 0;
@@ -677,7 +675,7 @@ static int lpuart32_poll_init(struct uart_port *port)
static void lpuart32_poll_put_char(struct uart_port *port, unsigned char c)
{
lpuart32_wait_bit_set(port, UARTSTAT, UARTSTAT_TDRE);
- lpuart32_write(port, UARTDATA, c);
+ lpuart32_write(port, c, UARTDATA);
}
static int lpuart32_poll_get_char(struct uart_port *port)
The 2nd and 3rd parameter were wrongly used, and cause kernel abort when doing kgdb debug. Fixes: 1da17d7cf8e2c4("tty: serial: fsl_lpuart: Use appropriate lpuart32_* I/O funcs") Signed-off-by: Peng Fan <peng.fan@nxp.com> --- V2: Fix poll init drivers/tty/serial/fsl_lpuart.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)