diff mbox series

[8/8] tty: serial, fix kernel-doc

Message ID 20200818085655.12071-8-jslaby@suse.cz
State New
Headers show
Series [1/8] tty: n_gsm, eliminate indirection for gsm->{output,error}() | expand

Commit Message

Jiri Slaby Aug. 18, 2020, 8:56 a.m. UTC
As in the previous patches, fix kernel-doc in serial drivers.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/tty/serial/ifx6x60.c       | 7 +++----
 drivers/tty/serial/men_z135_uart.c | 8 ++++----
 2 files changed, 7 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index 7d16fe41932f..095ddd04370f 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -257,7 +257,7 @@  static void mrdy_assert(struct ifx_spi_device *ifx_dev)
 
 /**
  *	ifx_spi_timeout		-	SPI timeout
- *	@arg: our SPI device
+ *	@t: timer in our SPI device
  *
  *	The SPI has timed out: hang up the tty. Users will then see a hangup
  *	and error events.
@@ -277,7 +277,6 @@  static void ifx_spi_timeout(struct timer_list *t)
 /**
  *	ifx_spi_tiocmget	-	get modem lines
  *	@tty: our tty device
- *	@filp: file handle issuing the request
  *
  *	Map the signal state into Linux modem flags and report the value
  *	in Linux terms
@@ -531,7 +530,7 @@  static int ifx_spi_chars_in_buffer(struct tty_struct *tty)
 
 /**
  *	ifx_port_hangup
- *	@port: our tty port
+ *	@tty: our tty
  *
  *	tty port hang up. Called when tty_hangup processing is invoked either
  *	by loss of carrier, or by software (eg vhangup). Serialized against
@@ -611,7 +610,7 @@  static const struct tty_operations ifx_spi_serial_ops = {
 
 /**
  *	ifx_spi_insert_fip_string	-	queue received data
- *	@ifx_ser: our SPI device
+ *	@ifx_dev: our SPI device
  *	@chars: buffer we have received
  *	@size: number of chars reeived
  *
diff --git a/drivers/tty/serial/men_z135_uart.c b/drivers/tty/serial/men_z135_uart.c
index 4f53a4caabf6..9acae5f8fc32 100644
--- a/drivers/tty/serial/men_z135_uart.c
+++ b/drivers/tty/serial/men_z135_uart.c
@@ -173,7 +173,7 @@  static void men_z135_reg_clr(struct men_z135_port *uart,
 
 /**
  * men_z135_handle_modem_status() - Handle change of modem status
- * @port: The UART port
+ * @uart: The UART port
  *
  * Handle change of modem status register. This is done by reading the "delta"
  * versions of DCD (Data Carrier Detect) and CTS (Clear To Send).
@@ -236,7 +236,7 @@  static u16 get_rx_fifo_content(struct men_z135_port *uart)
 
 /**
  * men_z135_handle_rx() - RX tasklet routine
- * @arg: Pointer to struct men_z135_port
+ * @uart: Pointer to struct men_z135_port
  *
  * Copy from RX FIFO and acknowledge number of bytes copied.
  */
@@ -287,7 +287,7 @@  static void men_z135_handle_rx(struct men_z135_port *uart)
 
 /**
  * men_z135_handle_tx() - TX tasklet routine
- * @arg: Pointer to struct men_z135_port
+ * @uart: Pointer to struct men_z135_port
  *
  */
 static void men_z135_handle_tx(struct men_z135_port *uart)
@@ -596,7 +596,7 @@  static void men_z135_stop_rx(struct uart_port *port)
 
 /**
  * men_z135_enable_ms() - Enable Modem Status
- * port:
+ * @port: the port
  *
  * Enable Modem Status IRQ.
  */