[04/10] USB: core: hub.c: use usb_control_msg_send() in a few places

Message ID 20200902110115.1994491-5-gregkh@linuxfoundation.org
State New
Headers show
Series
  • USB: new USB control message helper functions
Related show

Commit Message

Greg KH Sept. 2, 2020, 11:01 a.m.
There are a few calls to usb_control_msg() that can be converted to use
usb_control_msg_send() instead, so do that in order to make the error
checking a bit simpler and the code smaller.

Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/hub.c | 128 +++++++++++++++--------------------------
 1 file changed, 47 insertions(+), 81 deletions(-)

Comments

Alan Stern Sept. 2, 2020, 2:57 p.m. | #1
On Wed, Sep 02, 2020 at 01:01:06PM +0200, Greg Kroah-Hartman wrote:
> There are a few calls to usb_control_msg() that can be converted to use
> usb_control_msg_send() instead, so do that in order to make the error
> checking a bit simpler and the code smaller.
> 
> Cc: Alan Stern <stern@rowland.harvard.edu>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

One problem in this patch...

> @@ -3896,27 +3875,14 @@ static int usb_req_set_sel(struct usb_device *udev, enum usb3_link_state state)
>  	if (u2_pel > USB3_LPM_MAX_U2_SEL_PEL)
>  		u2_pel = USB3_LPM_MAX_U2_SEL_PEL;
>  
> -	/*
> -	 * usb_enable_lpm() can be called as part of a failed device reset,
> -	 * which may be initiated by an error path of a mass storage driver.
> -	 * Therefore, use GFP_NOIO.
> -	 */
> -	sel_values = kmalloc(sizeof *(sel_values), GFP_NOIO);
> -	if (!sel_values)
> -		return -ENOMEM;
> -
> -	sel_values->u1_sel = u1_sel;
> -	sel_values->u1_pel = u1_pel;
> -	sel_values->u2_sel = cpu_to_le16(u2_sel);
> -	sel_values->u2_pel = cpu_to_le16(u2_pel);
> +	sel_values.u1_sel = u1_sel;
> +	sel_values.u1_pel = u1_pel;
> +	sel_values.u2_sel = cpu_to_le16(u2_sel);
> +	sel_values.u2_pel = cpu_to_le16(u2_pel);
>  
> -	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
> -			USB_REQ_SET_SEL,
> -			USB_RECIP_DEVICE,
> -			0, 0,
> -			sel_values, sizeof *(sel_values),
> -			USB_CTRL_SET_TIMEOUT);
> -	kfree(sel_values);
> +	ret = usb_control_msg_send(udev, 0, USB_REQ_SET_SEL, USB_RECIP_DEVICE,
> +				   0, 0, &sel_values, sizeof(sel_values),
> +				   USB_CTRL_SET_TIMEOUT);

This effectively changes GFP_NOIO to GFP_KERNEL.  Probably you should
leave this particular call alone.

Alan Stern

Patch

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 5b768b80d1ee..b7468517f336 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -410,8 +410,8 @@  static int get_hub_descriptor(struct usb_device *hdev,
  */
 static int clear_hub_feature(struct usb_device *hdev, int feature)
 {
-	return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-		USB_REQ_CLEAR_FEATURE, USB_RT_HUB, feature, 0, NULL, 0, 1000);
+	return usb_control_msg_send(hdev, 0, USB_REQ_CLEAR_FEATURE, USB_RT_HUB,
+				    feature, 0, NULL, 0, 1000);
 }
 
 /*
@@ -419,9 +419,8 @@  static int clear_hub_feature(struct usb_device *hdev, int feature)
  */
 int usb_clear_port_feature(struct usb_device *hdev, int port1, int feature)
 {
-	return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-		USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature, port1,
-		NULL, 0, 1000);
+	return usb_control_msg_send(hdev, 0, USB_REQ_CLEAR_FEATURE, USB_RT_PORT,
+				    feature, port1, NULL, 0, 1000);
 }
 
 /*
@@ -429,9 +428,8 @@  int usb_clear_port_feature(struct usb_device *hdev, int port1, int feature)
  */
 static int set_port_feature(struct usb_device *hdev, int port1, int feature)
 {
-	return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-		USB_REQ_SET_FEATURE, USB_RT_PORT, feature, port1,
-		NULL, 0, 1000);
+	return usb_control_msg_send(hdev, 0, USB_REQ_SET_FEATURE, USB_RT_PORT,
+				    feature, port1, NULL, 0, 1000);
 }
 
 static char *to_led_name(int selector)
@@ -755,15 +753,14 @@  hub_clear_tt_buffer(struct usb_device *hdev, u16 devinfo, u16 tt)
 	/* Need to clear both directions for control ep */
 	if (((devinfo >> 11) & USB_ENDPOINT_XFERTYPE_MASK) ==
 			USB_ENDPOINT_XFER_CONTROL) {
-		int status = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-				HUB_CLEAR_TT_BUFFER, USB_RT_PORT,
-				devinfo ^ 0x8000, tt, NULL, 0, 1000);
+		int status = usb_control_msg_send(hdev, 0, 
+						  HUB_CLEAR_TT_BUFFER, USB_RT_PORT,
+						  devinfo ^ 0x8000, tt, NULL, 0, 1000);
 		if (status)
 			return status;
 	}
-	return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-			       HUB_CLEAR_TT_BUFFER, USB_RT_PORT, devinfo,
-			       tt, NULL, 0, 1000);
+	return usb_control_msg_send(hdev, 0, HUB_CLEAR_TT_BUFFER, USB_RT_PORT,
+				    devinfo, tt, NULL, 0, 1000);
 }
 
 /*
@@ -1049,11 +1046,10 @@  static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 	 */
 	if (type != HUB_RESUME) {
 		if (hdev->parent && hub_is_superspeed(hdev)) {
-			ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-					HUB_SET_DEPTH, USB_RT_HUB,
-					hdev->level - 1, 0, NULL, 0,
-					USB_CTRL_SET_TIMEOUT);
-			if (ret < 0)
+			ret = usb_control_msg_send(hdev, 0, HUB_SET_DEPTH, USB_RT_HUB,
+						   hdev->level - 1, 0, NULL, 0,
+						   USB_CTRL_SET_TIMEOUT);
+			if (ret)
 				dev_err(hub->intfdev,
 						"set hub depth failed\n");
 		}
@@ -2329,13 +2325,10 @@  static int usb_enumerate_device_otg(struct usb_device *udev)
 		/* enable HNP before suspend, it's simpler */
 		if (port1 == bus->otg_port) {
 			bus->b_hnp_enable = 1;
-			err = usb_control_msg(udev,
-				usb_sndctrlpipe(udev, 0),
-				USB_REQ_SET_FEATURE, 0,
-				USB_DEVICE_B_HNP_ENABLE,
-				0, NULL, 0,
-				USB_CTRL_SET_TIMEOUT);
-			if (err < 0) {
+			err = usb_control_msg_send(udev, 0, USB_REQ_SET_FEATURE, 0,
+						   USB_DEVICE_B_HNP_ENABLE, 0,
+						   NULL, 0, USB_CTRL_SET_TIMEOUT);
+			if (err) {
 				/*
 				 * OTG MESSAGE: report errors here,
 				 * customize to match your product.
@@ -2347,13 +2340,10 @@  static int usb_enumerate_device_otg(struct usb_device *udev)
 		} else if (desc->bLength == sizeof
 				(struct usb_otg_descriptor)) {
 			/* Set a_alt_hnp_support for legacy otg device */
-			err = usb_control_msg(udev,
-				usb_sndctrlpipe(udev, 0),
-				USB_REQ_SET_FEATURE, 0,
-				USB_DEVICE_A_ALT_HNP_SUPPORT,
-				0, NULL, 0,
-				USB_CTRL_SET_TIMEOUT);
-			if (err < 0)
+			err = usb_control_msg_send(udev, 0, USB_REQ_SET_FEATURE, 0,
+						   USB_DEVICE_A_ALT_HNP_SUPPORT, 0,
+						   NULL, 0, USB_CTRL_SET_TIMEOUT);
+			if (err)
 				dev_err(&udev->dev,
 					"set a_alt_hnp_support failed: %d\n",
 					err);
@@ -3121,10 +3111,8 @@  int usb_disable_ltm(struct usb_device *udev)
 	if (!udev->actconfig)
 		return 0;
 
-	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-			USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
-			USB_DEVICE_LTM_ENABLE, 0, NULL, 0,
-			USB_CTRL_SET_TIMEOUT);
+	return usb_control_msg_send(udev, 0, USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
+				    USB_DEVICE_LTM_ENABLE, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
 }
 EXPORT_SYMBOL_GPL(usb_disable_ltm);
 
@@ -3143,10 +3131,8 @@  void usb_enable_ltm(struct usb_device *udev)
 	if (!udev->actconfig)
 		return;
 
-	usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-			USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
-			USB_DEVICE_LTM_ENABLE, 0, NULL, 0,
-			USB_CTRL_SET_TIMEOUT);
+	usb_control_msg_send(udev, 0, USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
+			     USB_DEVICE_LTM_ENABLE, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
 }
 EXPORT_SYMBOL_GPL(usb_enable_ltm);
 
@@ -3163,17 +3149,14 @@  EXPORT_SYMBOL_GPL(usb_enable_ltm);
 static int usb_enable_remote_wakeup(struct usb_device *udev)
 {
 	if (udev->speed < USB_SPEED_SUPER)
-		return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
-				USB_DEVICE_REMOTE_WAKEUP, 0, NULL, 0,
-				USB_CTRL_SET_TIMEOUT);
+		return usb_control_msg_send(udev, 0, USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
+					    USB_DEVICE_REMOTE_WAKEUP, 0,
+					    NULL, 0, USB_CTRL_SET_TIMEOUT);
 	else
-		return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				USB_REQ_SET_FEATURE, USB_RECIP_INTERFACE,
-				USB_INTRF_FUNC_SUSPEND,
-				USB_INTRF_FUNC_SUSPEND_RW |
-					USB_INTRF_FUNC_SUSPEND_LP,
-				NULL, 0, USB_CTRL_SET_TIMEOUT);
+		return usb_control_msg_send(udev, 0, USB_REQ_SET_FEATURE, USB_RECIP_INTERFACE,
+					    USB_INTRF_FUNC_SUSPEND,
+					    USB_INTRF_FUNC_SUSPEND_RW | USB_INTRF_FUNC_SUSPEND_LP,
+					    NULL, 0, USB_CTRL_SET_TIMEOUT);
 }
 
 /*
@@ -3189,15 +3172,11 @@  static int usb_enable_remote_wakeup(struct usb_device *udev)
 static int usb_disable_remote_wakeup(struct usb_device *udev)
 {
 	if (udev->speed < USB_SPEED_SUPER)
-		return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
-				USB_DEVICE_REMOTE_WAKEUP, 0, NULL, 0,
-				USB_CTRL_SET_TIMEOUT);
+		return usb_control_msg_send(udev, 0, USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
+					    USB_DEVICE_REMOTE_WAKEUP, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
 	else
-		return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				USB_REQ_SET_FEATURE, USB_RECIP_INTERFACE,
-				USB_INTRF_FUNC_SUSPEND,	0, NULL, 0,
-				USB_CTRL_SET_TIMEOUT);
+		return usb_control_msg_send(udev, 0, USB_REQ_SET_FEATURE, USB_RECIP_INTERFACE,
+					    USB_INTRF_FUNC_SUSPEND, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
 }
 
 /* Count of wakeup-enabled devices at or below udev */
@@ -3844,7 +3823,7 @@  static const char * const usb3_lpm_names[]  = {
  */
 static int usb_req_set_sel(struct usb_device *udev, enum usb3_link_state state)
 {
-	struct usb_set_sel_req *sel_values;
+	struct usb_set_sel_req sel_values;
 	unsigned long long u1_sel;
 	unsigned long long u1_pel;
 	unsigned long long u2_sel;
@@ -3896,27 +3875,14 @@  static int usb_req_set_sel(struct usb_device *udev, enum usb3_link_state state)
 	if (u2_pel > USB3_LPM_MAX_U2_SEL_PEL)
 		u2_pel = USB3_LPM_MAX_U2_SEL_PEL;
 
-	/*
-	 * usb_enable_lpm() can be called as part of a failed device reset,
-	 * which may be initiated by an error path of a mass storage driver.
-	 * Therefore, use GFP_NOIO.
-	 */
-	sel_values = kmalloc(sizeof *(sel_values), GFP_NOIO);
-	if (!sel_values)
-		return -ENOMEM;
-
-	sel_values->u1_sel = u1_sel;
-	sel_values->u1_pel = u1_pel;
-	sel_values->u2_sel = cpu_to_le16(u2_sel);
-	sel_values->u2_pel = cpu_to_le16(u2_pel);
+	sel_values.u1_sel = u1_sel;
+	sel_values.u1_pel = u1_pel;
+	sel_values.u2_sel = cpu_to_le16(u2_sel);
+	sel_values.u2_pel = cpu_to_le16(u2_pel);
 
-	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-			USB_REQ_SET_SEL,
-			USB_RECIP_DEVICE,
-			0, 0,
-			sel_values, sizeof *(sel_values),
-			USB_CTRL_SET_TIMEOUT);
-	kfree(sel_values);
+	ret = usb_control_msg_send(udev, 0, USB_REQ_SET_SEL, USB_RECIP_DEVICE,
+				   0, 0, &sel_values, sizeof(sel_values),
+				   USB_CTRL_SET_TIMEOUT);
 	return ret;
 }
 
@@ -4056,7 +4022,7 @@  static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev,
 	 * associated with the link state we're about to enable.
 	 */
 	ret = usb_req_set_sel(udev, state);
-	if (ret < 0) {
+	if (ret) {
 		dev_warn(&udev->dev, "Set SEL for device-initiated %s failed.\n",
 				usb3_lpm_names[state]);
 		return;