diff mbox

[v3,2/8] phy: ti-pipe3: Add clocks to PIPE3 PHY Documentation binding

Message ID 1394187308-19622-3-git-send-email-rogerq@ti.com
State Accepted
Commit 57554008699a640c7af114c3f67707a9b88d69a6
Headers show

Commit Message

Roger Quadros March 7, 2014, 10:15 a.m. UTC 
Add wakeup, system and reference clocks to DT binding documentation.

Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 Documentation/devicetree/bindings/phy/ti-phy.txt | 12 ++++++++++++
 1 file changed, 12 insertions(+)
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index 073a623..96ba29e 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -59,6 +59,12 @@  Required properties:
    filled in "reg".
  - #phy-cells: determine the number of cells that should be given in the
    phandle while referencing this phy.
+ - clocks: a list of phandles and clock-specifier pairs, one for each entry in
+   clock-names.
+ - clock-names: should include:
+   * "wkupclk" - wakeup clock.
+   * "sysclk" - system clock.
+   * "refclk" - reference clock.
 
 Optional properties:
  - ctrl-module : phandle of the control module used by PHY driver to power on
@@ -74,4 +80,10 @@  usb3phy@4a084400 {
 	reg-names = "phy_rx", "phy_tx", "pll_ctrl";
 	ctrl-module = <&omap_control_usb>;
 	#phy-cells = <0>;
+	clocks = <&usb_phy_cm_clk32k>,
+		 <&sys_clkin>,
+		 <&usb_otg_ss_refclk960m>;
+	clock-names =	"wkupclk",
+			"sysclk",
+			"refclk";
 };