diff mbox series

[v8,11/13] arm64: dts: freescale: sl28: enable LED support

Message ID 20200813124832.17349-12-michael@walle.cc
State New
Headers show
Series Add support for Kontron sl28cpld | expand

Commit Message

Michael Walle Aug. 13, 2020, 12:48 p.m. UTC
Now that we have support for GPIO lines of the SMARC connector, enable
LED support on the KBox A-230-LS. There are two LEDs without fixed
functions, one is yellow and one is green. Unfortunately, it is just one
multi-color LED, thus while it is possible to enable both at the same
time it is hard to tell the difference between "yellow only" and "yellow
and green".

Signed-off-by: Michael Walle <michael@walle.cc>
---
Changes since v7:
 - use new "function" and "color" properties instead of a label
 - added default-on trigger for the power-led

Changes since v6:
 - none

Changes since v5:
 - changed the label, suggested by Pavel Machek

Changes since v4:
 - none

Changes since v3:
 - see cover letter

 .../fsl-ls1028a-kontron-kbox-a-230-ls.dts      | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
index 4b4cc6a1573d..dd516c0efd8b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -11,11 +11,29 @@ 
 
 /dts-v1/;
 #include "fsl-ls1028a-kontron-sl28-var4.dts"
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "Kontron KBox A-230-LS";
 	compatible = "kontron,kbox-a-230-ls", "kontron,sl28-var4",
 		     "kontron,sl28", "fsl,ls1028a";
+
+	leds {
+		compatible = "gpio-leds";
+
+		alarm-led {
+			function = LED_FUNCTION_ALARM;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&sl28cpld_gpio0 0 0>;
+		};
+
+		power-led {
+			linux,default-trigger = "default-on";
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&sl28cpld_gpio1 3 0>;
+		};
+	};
 };
 
 &enetc_mdio_pf3 {