@@ -425,6 +425,13 @@ config REGULATOR_RC5T583
through regulator interface. The device supports multiple DCDC/LDO
outputs which can be controlled by i2c communication.
+config REGULATOR_S2MPA01
+ tristate "Samsung S2MPA01 voltage regulator"
+ depends on MFD_SEC_CORE
+ help
+ This driver controls Samsung S2MPA01 voltage output regulator
+ via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
+
config REGULATOR_S2MPS11
tristate "Samsung S2MPS11 voltage regulator"
depends on MFD_SEC_CORE
@@ -58,6 +58,7 @@ obj-$(CONFIG_REGULATOR_PBIAS) += pbias-regulator.o
obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o
+obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
new file mode 100644
@@ -0,0 +1,481 @@
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/bug.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/samsung/core.h>
+#include <linux/mfd/samsung/s2mpa01.h>
+
+#define S2MPA01_REGULATOR_CNT ARRAY_SIZE(regulators)
+
+struct s2mpa01_info {
+ int ramp_delay24;
+ int ramp_delay3;
+ int ramp_delay5;
+ int ramp_delay16;
+ int ramp_delay7;
+ int ramp_delay8910;
+};
+
+static int get_ramp_delay(int ramp_delay)
+{
+ unsigned char cnt = 0;
+
+ ramp_delay /= 6250;
+
+ while (true) {
+ ramp_delay = ramp_delay >> 1;
+ if (ramp_delay == 0)
+ break;
+ cnt++;
+ }
+
+ if (cnt > 3)
+ cnt = 3;
+
+ return cnt;
+}
+
+static int s2mpa01_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
+ unsigned int old_selector,
+ unsigned int new_selector)
+{
+ struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev);
+ unsigned int ramp_delay = 0;
+ int old_volt, new_volt;
+
+ switch (rdev->desc->id) {
+ case S2MPA01_BUCK2:
+ case S2MPA01_BUCK4:
+ ramp_delay = s2mpa01->ramp_delay24;
+ break;
+ case S2MPA01_BUCK3:
+ ramp_delay = s2mpa01->ramp_delay3;
+ break;
+ case S2MPA01_BUCK5:
+ ramp_delay = s2mpa01->ramp_delay5;
+ break;
+ case S2MPA01_BUCK1:
+ case S2MPA01_BUCK6:
+ ramp_delay = s2mpa01->ramp_delay16;
+ break;
+ case S2MPA01_BUCK7:
+ ramp_delay = s2mpa01->ramp_delay7;
+ break;
+ case S2MPA01_BUCK8:
+ case S2MPA01_BUCK9:
+ case S2MPA01_BUCK10:
+ ramp_delay = s2mpa01->ramp_delay8910;
+ break;
+ }
+
+ if (ramp_delay == 0)
+ ramp_delay = rdev->desc->ramp_delay;
+
+ old_volt = rdev->desc->min_uV + (rdev->desc->uV_step * old_selector);
+ new_volt = rdev->desc->min_uV + (rdev->desc->uV_step * new_selector);
+
+ return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay);
+}
+
+static int s2mpa01_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
+{
+ struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev);
+ unsigned int ramp_val, ramp_shift, ramp_reg = S2MPA01_REG_RAMP2;
+ unsigned int ramp_enable = 1, enable_shift = 0;
+ int ret;
+
+ switch (rdev->desc->id) {
+ case S2MPA01_BUCK1:
+ enable_shift = S2MPA01_BUCK1_RAMP_EN_SHIFT;
+ if (!ramp_delay) {
+ ramp_enable = 0;
+ break;
+ }
+
+ if (ramp_delay > s2mpa01->ramp_delay16)
+ s2mpa01->ramp_delay16 = ramp_delay;
+ else
+ ramp_delay = s2mpa01->ramp_delay16;
+
+ ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT;
+ ramp_reg = S2MPA01_REG_RAMP1;
+ break;
+ case S2MPA01_BUCK2:
+ enable_shift = S2MPA01_BUCK2_RAMP_EN_SHIFT;
+ if (!ramp_delay) {
+ ramp_enable = 0;
+ break;
+ }
+
+ if (ramp_delay > s2mpa01->ramp_delay24)
+ s2mpa01->ramp_delay24 = ramp_delay;
+ else
+ ramp_delay = s2mpa01->ramp_delay24;
+
+ ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT;
+ ramp_reg = S2MPA01_REG_RAMP1;
+ break;
+ case S2MPA01_BUCK3:
+ enable_shift = S2MPA01_BUCK3_RAMP_EN_SHIFT;
+ if (!ramp_delay) {
+ ramp_enable = 0;
+ break;
+ }
+
+ s2mpa01->ramp_delay3 = ramp_delay;
+ ramp_shift = S2MPA01_BUCK3_RAMP_SHIFT;
+ ramp_reg = S2MPA01_REG_RAMP1;
+ break;
+ case S2MPA01_BUCK4:
+ enable_shift = S2MPA01_BUCK4_RAMP_EN_SHIFT;
+ if (!ramp_delay) {
+ ramp_enable = 0;
+ break;
+ }
+
+ if (ramp_delay > s2mpa01->ramp_delay24)
+ s2mpa01->ramp_delay24 = ramp_delay;
+ else
+ ramp_delay = s2mpa01->ramp_delay24;
+
+ ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT;
+ ramp_reg = S2MPA01_REG_RAMP1;
+ break;
+ case S2MPA01_BUCK5:
+ s2mpa01->ramp_delay5 = ramp_delay;
+ ramp_shift = S2MPA01_BUCK5_RAMP_SHIFT;
+ break;
+ case S2MPA01_BUCK6:
+ if (ramp_delay > s2mpa01->ramp_delay16)
+ s2mpa01->ramp_delay16 = ramp_delay;
+ else
+ ramp_delay = s2mpa01->ramp_delay16;
+
+ ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT;
+ break;
+ case S2MPA01_BUCK7:
+ s2mpa01->ramp_delay7 = ramp_delay;
+ ramp_shift = S2MPA01_BUCK7_RAMP_SHIFT;
+ break;
+ case S2MPA01_BUCK8:
+ case S2MPA01_BUCK9:
+ case S2MPA01_BUCK10:
+ if (ramp_delay > s2mpa01->ramp_delay8910)
+ s2mpa01->ramp_delay8910 = ramp_delay;
+ else
+ ramp_delay = s2mpa01->ramp_delay8910;
+
+ ramp_shift = S2MPA01_BUCK8910_RAMP_SHIFT;
+ break;
+ default:
+ return 0;
+ }
+
+ if (!ramp_enable)
+ goto ramp_disable;
+
+ if (enable_shift) {
+ ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
+ 1 << enable_shift, 1 << enable_shift);
+ if (ret) {
+ dev_err(&rdev->dev, "failed to enable ramp rate\n");
+ return ret;
+ }
+ }
+
+ ramp_val = get_ramp_delay(ramp_delay);
+
+ return regmap_update_bits(rdev->regmap, ramp_reg, 0x3 << ramp_shift,
+ ramp_val << ramp_shift);
+
+ramp_disable:
+ return regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
+ 1 << enable_shift, 0);
+}
+
+static struct regulator_ops s2mpa01_ldo_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+static struct regulator_ops s2mpa01_buck_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = s2mpa01_regulator_set_voltage_time_sel,
+ .set_ramp_delay = s2mpa01_set_ramp_delay,
+};
+
+#define regulator_desc_ldo1(num) { \
+ .name = "LDO"#num, \
+ .id = S2MPA01_LDO##num, \
+ .ops = &s2mpa01_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = S2MPA01_LDO_MIN, \
+ .uV_step = S2MPA01_LDO_STEP1, \
+ .n_voltages = S2MPA01_LDO_N_VOLTAGES, \
+ .vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \
+ .vsel_mask = S2MPA01_LDO_VSEL_MASK, \
+ .enable_reg = S2MPA01_REG_L1CTRL + num - 1, \
+ .enable_mask = S2MPA01_ENABLE_MASK \
+}
+#define regulator_desc_ldo2(num) { \
+ .name = "LDO"#num, \
+ .id = S2MPA01_LDO##num, \
+ .ops = &s2mpa01_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = S2MPA01_LDO_MIN, \
+ .uV_step = S2MPA01_LDO_STEP2, \
+ .n_voltages = S2MPA01_LDO_N_VOLTAGES, \
+ .vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \
+ .vsel_mask = S2MPA01_LDO_VSEL_MASK, \
+ .enable_reg = S2MPA01_REG_L1CTRL + num - 1, \
+ .enable_mask = S2MPA01_ENABLE_MASK \
+}
+
+#define regulator_desc_buck1_4(num) { \
+ .name = "BUCK"#num, \
+ .id = S2MPA01_BUCK##num, \
+ .ops = &s2mpa01_buck_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = S2MPA01_BUCK_MIN1, \
+ .uV_step = S2MPA01_BUCK_STEP1, \
+ .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
+ .ramp_delay = S2MPA01_RAMP_DELAY, \
+ .vsel_reg = S2MPA01_REG_B1CTRL2 + (num - 1) * 2, \
+ .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
+ .enable_reg = S2MPA01_REG_B1CTRL1 + (num - 1) * 2, \
+ .enable_mask = S2MPA01_ENABLE_MASK \
+}
+
+#define regulator_desc_buck5 { \
+ .name = "BUCK5", \
+ .id = S2MPA01_BUCK5, \
+ .ops = &s2mpa01_buck_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = S2MPA01_BUCK_MIN2, \
+ .uV_step = S2MPA01_BUCK_STEP1, \
+ .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
+ .ramp_delay = S2MPA01_RAMP_DELAY, \
+ .vsel_reg = S2MPA01_REG_B5CTRL2, \
+ .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
+ .enable_reg = S2MPA01_REG_B5CTRL1, \
+ .enable_mask = S2MPA01_ENABLE_MASK \
+}
+
+#define regulator_desc_buck6_7(num) { \
+ .name = "BUCK"#num, \
+ .id = S2MPA01_BUCK##num, \
+ .ops = &s2mpa01_buck_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = S2MPA01_BUCK_MIN1, \
+ .uV_step = S2MPA01_BUCK_STEP1, \
+ .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
+ .ramp_delay = S2MPA01_RAMP_DELAY, \
+ .vsel_reg = S2MPA01_REG_B6CTRL2 + (num - 6) * 2, \
+ .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
+ .enable_reg = S2MPA01_REG_B6CTRL1 + (num - 6) * 2, \
+ .enable_mask = S2MPA01_ENABLE_MASK \
+}
+
+#define regulator_desc_buck8 { \
+ .name = "BUCK8", \
+ .id = S2MPA01_BUCK8, \
+ .ops = &s2mpa01_buck_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = S2MPA01_BUCK_MIN2, \
+ .uV_step = S2MPA01_BUCK_STEP2, \
+ .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
+ .ramp_delay = S2MPA01_RAMP_DELAY, \
+ .vsel_reg = S2MPA01_REG_B8CTRL2, \
+ .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
+ .enable_reg = S2MPA01_REG_B8CTRL1, \
+ .enable_mask = S2MPA01_ENABLE_MASK \
+}
+
+#define regulator_desc_buck9 { \
+ .name = "BUCK9", \
+ .id = S2MPA01_BUCK9, \
+ .ops = &s2mpa01_buck_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = S2MPA01_BUCK_MIN4, \
+ .uV_step = S2MPA01_BUCK_STEP2, \
+ .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
+ .ramp_delay = S2MPA01_RAMP_DELAY, \
+ .vsel_reg = S2MPA01_REG_B9CTRL2, \
+ .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
+ .enable_reg = S2MPA01_REG_B9CTRL1, \
+ .enable_mask = S2MPA01_ENABLE_MASK \
+}
+
+#define regulator_desc_buck10 { \
+ .name = "BUCK10", \
+ .id = S2MPA01_BUCK10, \
+ .ops = &s2mpa01_buck_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = S2MPA01_BUCK_MIN3, \
+ .uV_step = S2MPA01_BUCK_STEP2, \
+ .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
+ .ramp_delay = S2MPA01_RAMP_DELAY, \
+ .vsel_reg = S2MPA01_REG_B10CTRL2, \
+ .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
+ .enable_reg = S2MPA01_REG_B10CTRL1, \
+ .enable_mask = S2MPA01_ENABLE_MASK \
+}
+
+static struct regulator_desc regulators[] = {
+ regulator_desc_ldo2(1),
+ regulator_desc_ldo1(2),
+ regulator_desc_ldo1(3),
+ regulator_desc_ldo1(4),
+ regulator_desc_ldo1(5),
+ regulator_desc_ldo2(6),
+ regulator_desc_ldo1(7),
+ regulator_desc_ldo1(8),
+ regulator_desc_ldo1(9),
+ regulator_desc_ldo1(10),
+ regulator_desc_ldo2(11),
+ regulator_desc_ldo1(12),
+ regulator_desc_ldo1(13),
+ regulator_desc_ldo1(14),
+ regulator_desc_ldo1(15),
+ regulator_desc_ldo1(16),
+ regulator_desc_ldo1(17),
+ regulator_desc_ldo1(18),
+ regulator_desc_ldo1(19),
+ regulator_desc_ldo1(20),
+ regulator_desc_ldo1(21),
+ regulator_desc_ldo2(22),
+ regulator_desc_ldo2(23),
+ regulator_desc_ldo1(24),
+ regulator_desc_ldo1(25),
+ regulator_desc_ldo1(26),
+ regulator_desc_buck1_4(1),
+ regulator_desc_buck1_4(2),
+ regulator_desc_buck1_4(3),
+ regulator_desc_buck1_4(4),
+ regulator_desc_buck5,
+ regulator_desc_buck6_7(6),
+ regulator_desc_buck6_7(7),
+ regulator_desc_buck8,
+ regulator_desc_buck9,
+ regulator_desc_buck10,
+};
+
+static int s2mpa01_pmic_probe(struct platform_device *pdev)
+{
+ struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+ struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
+ struct of_regulator_match rdata[S2MPA01_REGULATOR_MAX];
+ struct device_node *reg_np = NULL;
+ struct regulator_config config = { };
+ struct s2mpa01_info *s2mpa01;
+ int i;
+
+ s2mpa01 = devm_kzalloc(&pdev->dev, sizeof(*s2mpa01), GFP_KERNEL);
+ if (!s2mpa01)
+ return -ENOMEM;
+
+ for (i = 0; i < S2MPA01_REGULATOR_CNT; i++)
+ rdata[i].name = regulators[i].name;
+
+ if (iodev->dev->of_node) {
+ reg_np = of_get_child_by_name(iodev->dev->of_node,
+ "regulators");
+ if (!reg_np) {
+ dev_err(&pdev->dev,
+ "could not find regulators sub-node\n");
+ return -EINVAL;
+ }
+
+ of_regulator_match(&pdev->dev, reg_np, rdata,
+ S2MPA01_REGULATOR_MAX);
+ of_node_put(reg_np);
+ }
+
+ platform_set_drvdata(pdev, s2mpa01);
+
+ config.dev = &pdev->dev;
+ config.regmap = iodev->regmap_pmic;
+ config.driver_data = s2mpa01;
+
+ for (i = 0; i < S2MPA01_REGULATOR_MAX; i++) {
+ struct regulator_dev *rdev;
+ if (pdata)
+ config.init_data = pdata->regulators[i].initdata;
+ else
+ config.init_data = rdata[i].init_data;
+
+ if (reg_np)
+ config.of_node = rdata[i].of_node;
+
+ rdev = devm_regulator_register(&pdev->dev,
+ ®ulators[i], &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "regulator init failed for %d\n",
+ i);
+ return PTR_ERR(rdev);
+ }
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id s2mpa01_pmic_id[] = {
+ { "s2mpa01-pmic", 0},
+ { },
+};
+MODULE_DEVICE_TABLE(platform, s2mpa01_pmic_id);
+
+static struct platform_driver s2mpa01_pmic_driver = {
+ .driver = {
+ .name = "s2mpa01-pmic",
+ .owner = THIS_MODULE,
+ },
+ .probe = s2mpa01_pmic_probe,
+ .id_table = s2mpa01_pmic_id,
+};
+
+module_platform_driver(s2mpa01_pmic_driver);
+
+/* Module information */
+MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
+MODULE_AUTHOR("Sachin Kamat <sachin.kamat@samsung.com>");
+MODULE_DESCRIPTION("SAMSUNG S2MPA01 Regulator Driver");
+MODULE_LICENSE("GPL");