From patchwork Mon Mar 17 20:43:37 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Byungho An X-Patchwork-Id: 26405 Return-Path: X-Original-To: linaro@patches.linaro.org Delivered-To: linaro@patches.linaro.org Received: from mail-ve0-f198.google.com (mail-ve0-f198.google.com [209.85.128.198]) by ip-10-151-82-157.ec2.internal (Postfix) with ESMTPS id 6301D20143 for ; Mon, 17 Mar 2014 20:44:08 +0000 (UTC) Received: by mail-ve0-f198.google.com with SMTP id oz11sf14907308veb.5 for ; Mon, 17 Mar 2014 13:44:08 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:delivered-to:from:to:cc:subject:date:message-id :mime-version:thread-index:dlp-filter:sender:precedence:list-id :x-original-sender:x-original-authentication-results:mailing-list :list-post:list-help:list-archive:list-unsubscribe:content-type :content-transfer-encoding:content-language; bh=mlALtRNl/xJcX1Zen5jXNl4gUaI5PSYMZEnBCGnaEy8=; b=cGkDolijO9vcyasbQMmb2y5Po+TgVHj55P9GpKnUZVq+iokbmShDLMUgtd+f9rUo6g hxJ4Kclizgzt9CS39ouVroc/Th8oIJw/7rv2mFM9SKNq36QukszGyIdSHtLalu9hHQuD gd7NetFnku/Ov2Ce1671Z4OZltlnCh6pGfNu9NG73vnDxLKAl7rOHdJLQmionV1+wI+1 dBQkhgQqDwKEpB3zoGXe9INtRbn45feUAKPGMtbrsegb3Zqgo5ADtsQcBa0nq+rHtYEs 845zHVYHAk2GcCBBZFvNu4p6AadizFdLO0WtDuydJqh4mUEFZHHfdUzdV/umKSO561ef edxw== X-Gm-Message-State: ALoCoQmp0HOWj2KXB1YHIUXNSt4W8cmiOWAaq4zigRJSSOnkpKRhZA+A8BXaUdbBjgvfvi7XfVg6 X-Received: by 10.59.8.226 with SMTP id dn2mr425133ved.30.1395089048098; Mon, 17 Mar 2014 13:44:08 -0700 (PDT) X-BeenThere: patchwork-forward@linaro.org Received: by 10.140.37.102 with SMTP id q93ls1774912qgq.67.gmail; Mon, 17 Mar 2014 13:44:07 -0700 (PDT) X-Received: by 10.220.159.4 with SMTP id h4mr10253128vcx.1.1395089047970; Mon, 17 Mar 2014 13:44:07 -0700 (PDT) Received: from mail-ve0-f171.google.com (mail-ve0-f171.google.com [209.85.128.171]) by mx.google.com with ESMTPS id rx10si2080026vdc.150.2014.03.17.13.44.07 for (version=TLSv1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Mon, 17 Mar 2014 13:44:07 -0700 (PDT) Received-SPF: neutral (google.com: 209.85.128.171 is neither permitted nor denied by best guess record for domain of patch+caf_=patchwork-forward=linaro.org@linaro.org) client-ip=209.85.128.171; Received: by mail-ve0-f171.google.com with SMTP id cz12so6133320veb.16 for ; Mon, 17 Mar 2014 13:44:07 -0700 (PDT) X-Received: by 10.220.83.4 with SMTP id d4mr71511vcl.39.1395089047780; Mon, 17 Mar 2014 13:44:07 -0700 (PDT) X-Forwarded-To: patchwork-forward@linaro.org X-Forwarded-For: patch@linaro.org patchwork-forward@linaro.org Delivered-To: patch@linaro.org Received: by 10.220.78.9 with SMTP id i9csp155276vck; Mon, 17 Mar 2014 13:44:06 -0700 (PDT) X-Received: by 10.68.203.135 with SMTP id kq7mr27939305pbc.85.1395089046031; Mon, 17 Mar 2014 13:44:06 -0700 (PDT) Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id po10si10832362pab.56.2014.03.17.13.44.05; Mon, 17 Mar 2014 13:44:05 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of netdev-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752069AbaCQUoA (ORCPT + 4 others); Mon, 17 Mar 2014 16:44:00 -0400 Received: from mailout4.samsung.com ([203.254.224.34]:25688 "EHLO mailout4.samsung.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751304AbaCQUnw (ORCPT ); Mon, 17 Mar 2014 16:43:52 -0400 Received: from epcpsbgr5.samsung.com (u145.gpu120.samsung.co.kr [203.254.230.145]) by mailout4.samsung.com (Oracle Communications Messaging Server 7u4-24.01 (7.0.4.24.0) 64bit (built Nov 17 2011)) with ESMTP id <0N2L00HBDLKVFQ30@mailout4.samsung.com>; Tue, 18 Mar 2014 05:43:43 +0900 (KST) Received: from epcpsbgm1.samsung.com ( [203.254.230.51]) by epcpsbgr5.samsung.com (EPCPMTA) with SMTP id E9.96.14803.E7E57235; Tue, 18 Mar 2014 05:43:43 +0900 (KST) X-AuditID: cbfee691-b7efc6d0000039d3-2f-53275e7e134f Received: from epmmp2 ( [203.254.227.17]) by epcpsbgm1.samsung.com (EPCPMTA) with SMTP id 0F.28.29263.E7E57235; Tue, 18 Mar 2014 05:43:42 +0900 (KST) Received: from VISITOR1LAB ([105.128.19.10]) by mmp2.samsung.com (Oracle Communications Messaging Server 7u4-24.01 (7.0.4.24.0) 64bit (built Nov 17 2011)) with ESMTPA id <0N2L00EJWLKRKR00@mmp2.samsung.com>; Tue, 18 Mar 2014 05:43:42 +0900 (KST) From: Byungho An To: netdev@vger.kernel.org, linux-samsung-soc@vger.kernel.org Cc: davem@davemloft.net, ks.giri@samsung.com, ilho215.lee@samsung.com Subject: [PATCH V3 4/8] net: sxgbe: add EEE(Energy Efficient Ethernet) for Samsung sxgbe Date: Mon, 17 Mar 2014 13:43:37 -0700 Message-id: <00bd01cf4221$930cfe50$b926faf0$@samsung.com> MIME-version: 1.0 X-Mailer: Microsoft Outlook 14.0 Thread-index: Ac9CH6h9x9Wh/KM9SDq818lMTRtHVQ== X-Brightmail-Tracker: H4sIAAAAAAAAA+NgFtrGIsWRmVeSWpSXmKPExsVy+t8zY936OPVgg9uLWSzmnG9hsTj6byGj xfyjO5gsZpzfx2RxbIGYA6vHlpU3mTz6tqxi9Pi8SS6AOYrLJiU1J7MstUjfLoErY/a7BsaC +9MYK371b2dqYPxf08XIySEhYCJx//Z+JghbTOLCvfVsXYxcHEICyxglnrVuYIcpanywnAki MZ1R4vfntYwQzh9GiaY/5xhBqtgE1CSaZ15mA7FFBGwllhz5DNTNwcEs4CrRc0MDJCwsECUx t2E5WAmLgKrEt0/3wRbwClhKvN6wnAXCFpT4MfkemM0soCWxfudxJghbXmLzmrfMEAcpSOw4 +5oRYpWeRO/ZBawQNeISkx48ZAe5TUJgG7vExo+rWCGWCUh8m3yIBeQeCQFZiU0HoOZIShxc cYNlAqPYLCSrZyFZPQvJ6llIVixgZFnFKJpakFxQnJReZKpXnJhbXJqXrpecn7uJERJnE3cw 3j9gfYgxGWj9RGYp0eR8YJzmlcQbGpsZWZiamBobmVuakSasJM6b/igpSEggPbEkNTs1tSC1 KL6oNCe1+BAjEwenVAOjdGVAUuW11IeWmrf/Ch0x0tz29aHyWRnHfzoLzJbVzGKpmjvr4YXd sr8YzqdsdLFf5rtXXu9d/n3hWbkaZueZVeL6Vt1o/PMke7fpRFUBv9ULdp4R8zpgnfnjw12n 3Sui9hxgfLuhSGBSKjMD9zrbBVNvP0yPz32UvXjtiZrTJ7W+znnXmMXOqcRSnJFoqMVcVJwI AHb5On3JAgAA X-Brightmail-Tracker: H4sIAAAAAAAAA+NgFprMKsWRmVeSWpSXmKPExsVy+t9jQd26OPVgg3MPLC3mnG9hsTj6byGj xfyjO5gsZpzfx2RxbIGYA6vHlpU3mTz6tqxi9Pi8SS6AOaqB0SYjNTEltUghNS85PyUzL91W yTs43jne1MzAUNfQ0sJcSSEvMTfVVsnFJ0DXLTMHaKWSQlliTilQKCCxuFhJ3w7ThNAQN10L mMYIXd+QILgeIwM0kLCOMWP2uwbGgvvTGCt+9W9namD8X9PFyMkhIWAi0fhgOROELSZx4d56 ti5GLg4hgemMEr8/r2WEcP4wSjT9OccIUsUmoCbRPPMyG4gtImArseTIZ/YuRg4OZgFXiZ4b GiBhYYEoibkNy8FKWARUJb59us8OYvMKWEq83rCcBcIWlPgx+R6YzSygJbF+53EmCFteYvOa t8wQBylI7Dj7mhFilZ5E79kFrBA14hKTHjxkn8AoMAvJqFlIRs1CMmoWkpYFjCyrGEVTC5IL ipPScw31ihNzi0vz0vWS83M3MYKj+JnUDsaVDRaHGAU4GJV4eF+wqQcLsSaWFVfmHmKU4GBW EuGVMAEK8aYkVlalFuXHF5XmpBYfYkwG+nQis5Rocj4wweSVxBsam5gZWRqZWRiZmJuTJqwk znug1TpQSCA9sSQ1OzW1ILUIZgsTB6dUA6MO+4VnnFXllvzT7Le/fnQvz8XB6nu8oLHlrcQ0 A7Ej1eWzLokYhKz5fmKV0VvLrAU6YUGT1nJ8312isWsZ3zKztrVFymuOR8aYnpqwLqSqqLz0 0EyfD5NuPerV17q0gvGVef6XyQmRZXdlf7QanXNQrX//X+m71n6ubvcklr27WdYESC27f1yJ pTgj0VCLuag4EQDBDpbsJgMAAA== DLP-Filter: Pass X-MTR: 20000000000000000@CPGS X-CFilter-Loop: Reflected Sender: netdev-owner@vger.kernel.org Precedence: list List-ID: X-Mailing-List: netdev@vger.kernel.org X-Removed-Original-Auth: Dkim didn't pass. X-Original-Sender: bh74.an@samsung.com X-Original-Authentication-Results: mx.google.com; spf=neutral (google.com: 209.85.128.171 is neither permitted nor denied by best guess record for domain of patch+caf_=patchwork-forward=linaro.org@linaro.org) smtp.mail=patch+caf_=patchwork-forward=linaro.org@linaro.org Mailing-list: list patchwork-forward@linaro.org; contact patchwork-forward+owners@linaro.org X-Google-Group-Id: 836684582541 List-Post: , List-Help: , List-Archive: List-Unsubscribe: , Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7bit Content-language: en-us From: Girish K S Added support for the EEE(Energy Efficient Ethernet) in 10G ethernet driver. Signed-off-by: Girish K S Neatening-by: Joe Perches Signed-off-by: Byungho An --- drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h | 53 +++++++ drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c | 86 +++++++++- drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c | 47 ++++++ drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c | 165 +++++++++++++++++++- .../net/ethernet/samsung/sxgbe/sxgbe_platform.c | 4 + drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h | 5 + 6 files changed, 358 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h index b5fafe5..0d8ed8a 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h @@ -115,6 +115,33 @@ struct sxgbe_mtl_ops; #define RX_PTP_SIGNAL 0x0A #define RX_PTP_RESV_MSG 0x0F +/* EEE-LPI mode flags*/ +#define TX_ENTRY_LPI_MODE 0x10 +#define TX_EXIT_LPI_MODE 0x20 +#define RX_ENTRY_LPI_MODE 0x40 +#define RX_EXIT_LPI_MODE 0x80 + +/* EEE-LPI Interrupt status flag */ +#define LPI_INT_STATUS BIT(5) + +/* EEE-LPI Default timer values */ +#define LPI_LINK_STATUS_TIMER 0x3E8 +#define LPI_MAC_WAIT_TIMER 0x00 + +/* EEE-LPI Control and status definitions */ +#define LPI_CTRL_STATUS_TXA BIT(19) +#define LPI_CTRL_STATUS_PLSDIS BIT(18) +#define LPI_CTRL_STATUS_PLS BIT(17) +#define LPI_CTRL_STATUS_LPIEN BIT(16) +#define LPI_CTRL_STATUS_TXRSTP BIT(11) +#define LPI_CTRL_STATUS_RXRSTP BIT(10) +#define LPI_CTRL_STATUS_RLPIST BIT(9) +#define LPI_CTRL_STATUS_TLPIST BIT(8) +#define LPI_CTRL_STATUS_RLPIEX BIT(3) +#define LPI_CTRL_STATUS_RLPIEN BIT(2) +#define LPI_CTRL_STATUS_TLPIEX BIT(1) +#define LPI_CTRL_STATUS_TLPIEN BIT(0) + enum dma_irq_status { tx_hard_error = BIT(0), tx_bump_tc = BIT(1), @@ -199,6 +226,13 @@ struct sxgbe_extra_stats { unsigned long rx_buffer_access_err; unsigned long rx_data_transfer_err; + /* EEE-LPI stats */ + unsigned long tx_lpi_entry_n; + unsigned long tx_lpi_exit_n; + unsigned long rx_lpi_entry_n; + unsigned long rx_lpi_exit_n; + unsigned long eee_wakeup_error_n; + /* RX specific */ /* L2 error */ unsigned long rx_code_gmii_err; @@ -296,6 +330,13 @@ struct sxgbe_core_ops { unsigned char feature_index); /* adjust SXGBE speed */ void (*set_speed)(void __iomem *ioaddr, unsigned char speed); + + /* EEE-LPI specific operations */ + void (*set_eee_mode)(void __iomem *ioaddr); + void (*reset_eee_mode)(void __iomem *ioaddr); + void (*set_eee_timer)(void __iomem *ioaddr, const int ls, + const int tw); + void (*set_eee_pls)(void __iomem *ioaddr, const int link); }; const struct sxgbe_core_ops *sxgbe_get_core_ops(void); @@ -351,6 +392,8 @@ struct sxgbe_hw_features { /* IEEE 1588-2008 */ unsigned int atime_stamp; + unsigned int eee; + unsigned int tx_csum_offload; unsigned int rx_csum_offload; unsigned int multi_macaddr; @@ -433,6 +476,13 @@ struct sxgbe_priv_data { /* tc control */ int tx_tc; int rx_tc; + /* EEE-LPI specific members */ + struct timer_list eee_ctrl_timer; + bool tx_path_in_lpi_mode; + int lpi_irq; + int eee_enabled; + int eee_active; + int tx_lpi_timer; }; /* Function prototypes */ @@ -455,4 +505,7 @@ int sxgbe_restore(struct net_device *ndev); const struct sxgbe_mtl_ops *sxgbe_get_mtl_ops(void); +void sxgbe_disable_eee_mode(struct sxgbe_priv_data * const priv); +bool sxgbe_eee_init(struct sxgbe_priv_data * const priv); + #endif /* __SXGBE_COMMON_H__ */ diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c index 17eea58..bf93b16 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c @@ -47,11 +47,38 @@ static void sxgbe_core_dump_regs(void __iomem *ioaddr) { } +static int sxgbe_get_lpi_status(void __iomem *ioaddr, const u32 irq_status) +{ + int status = 0; + int lpi_status; + + /* Reading this register shall clear all the LPI status bits */ + lpi_status = readl(ioaddr + SXGBE_CORE_LPI_CTRL_STATUS); + + if (lpi_status & LPI_CTRL_STATUS_TLPIEN) + status |= TX_ENTRY_LPI_MODE; + if (lpi_status & LPI_CTRL_STATUS_TLPIEX) + status |= TX_EXIT_LPI_MODE; + if (lpi_status & LPI_CTRL_STATUS_RLPIEN) + status |= RX_ENTRY_LPI_MODE; + if (lpi_status & LPI_CTRL_STATUS_RLPIEX) + status |= RX_EXIT_LPI_MODE; + + return status; +} + /* Handle extra events on specific interrupts hw dependent */ static int sxgbe_core_host_irq_status(void __iomem *ioaddr, struct sxgbe_extra_stats *x) { - return 0; + int irq_status, status = 0; + + irq_status = readl(ioaddr + SXGBE_CORE_INT_STATUS_REG); + + if (unlikely(irq_status & LPI_INT_STATUS)) + status |= sxgbe_get_lpi_status(ioaddr, irq_status); + + return status; } /* Set power management mode (e.g. magic frame) */ @@ -137,6 +164,59 @@ static void sxgbe_core_set_speed(void __iomem *ioaddr, unsigned char speed) writel(tx_cfg, ioaddr + SXGBE_CORE_TX_CONFIG_REG); } +static void sxgbe_set_eee_mode(void __iomem *ioaddr) +{ + u32 ctrl; + + /* Enable the LPI mode for transmit path with Tx automate bit set. + * When Tx Automate bit is set, MAC internally handles the entry + * to LPI mode after all outstanding and pending packets are + * transmitted. + */ + ctrl = readl(ioaddr + SXGBE_CORE_LPI_CTRL_STATUS); + ctrl |= LPI_CTRL_STATUS_LPIEN | LPI_CTRL_STATUS_TXA; + writel(ctrl, ioaddr + SXGBE_CORE_LPI_CTRL_STATUS); +} + +static void sxgbe_reset_eee_mode(void __iomem *ioaddr) +{ + u32 ctrl; + + ctrl = readl(ioaddr + SXGBE_CORE_LPI_CTRL_STATUS); + ctrl &= ~(LPI_CTRL_STATUS_LPIEN | LPI_CTRL_STATUS_TXA); + writel(ctrl, ioaddr + SXGBE_CORE_LPI_CTRL_STATUS); +} + +static void sxgbe_set_eee_pls(void __iomem *ioaddr, const int link) +{ + u32 ctrl; + + ctrl = readl(ioaddr + SXGBE_CORE_LPI_CTRL_STATUS); + + /* If the PHY link status is UP then set PLS */ + if (link) + ctrl |= LPI_CTRL_STATUS_PLS; + else + ctrl &= ~LPI_CTRL_STATUS_PLS; + + writel(ctrl, ioaddr + SXGBE_CORE_LPI_CTRL_STATUS); +} + +static void sxgbe_set_eee_timer(void __iomem *ioaddr, + const int ls, const int tw) +{ + int value = ((tw & 0xffff)) | ((ls & 0x7ff) << 16); + + /* Program the timers in the LPI timer control register: + * LS: minimum time (ms) for which the link + * status from PHY should be ok before transmitting + * the LPI pattern. + * TW: minimum time (us) for which the core waits + * after it has stopped transmitting the LPI pattern. + */ + writel(value, ioaddr + SXGBE_CORE_LPI_TIMER_CTRL); +} + const struct sxgbe_core_ops core_ops = { .core_init = sxgbe_core_init, .dump_regs = sxgbe_core_dump_regs, @@ -149,6 +229,10 @@ const struct sxgbe_core_ops core_ops = { .get_controller_version = sxgbe_get_controller_version, .get_hw_feature = sxgbe_get_hw_feature, .set_speed = sxgbe_core_set_speed, + .set_eee_mode = sxgbe_set_eee_mode, + .reset_eee_mode = sxgbe_reset_eee_mode, + .set_eee_timer = sxgbe_set_eee_timer, + .set_eee_pls = sxgbe_set_eee_pls, }; const struct sxgbe_core_ops *sxgbe_get_core_ops(void) diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c index 1dce2b2..9083300 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c @@ -32,10 +32,57 @@ struct sxgbe_stats { } static const struct sxgbe_stats sxgbe_gstrings_stats[] = { + SXGBE_STAT(tx_lpi_entry_n), + SXGBE_STAT(tx_lpi_exit_n), + SXGBE_STAT(rx_lpi_entry_n), + SXGBE_STAT(rx_lpi_exit_n), + SXGBE_STAT(eee_wakeup_error_n), }; #define SXGBE_STATS_LEN ARRAY_SIZE(sxgbe_gstrings_stats) +static int sxgbe_ethtool_get_eee(struct net_device *dev, + struct ethtool_eee *edata) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + + if (!priv->hw_cap.eee) + return -EOPNOTSUPP; + + edata->eee_enabled = priv->eee_enabled; + edata->eee_active = priv->eee_active; + edata->tx_lpi_timer = priv->tx_lpi_timer; + + return phy_ethtool_get_eee(priv->phydev, edata); +} + +static int sxgbe_ethtool_set_eee(struct net_device *dev, + struct ethtool_eee *edata) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + + priv->eee_enabled = edata->eee_enabled; + + if (!priv->eee_enabled) { + sxgbe_disable_eee_mode(priv); + } else { + /* We are asking for enabling the EEE but it is safe + * to verify all by invoking the eee_init function. + * In case of failure it will return an error. + */ + priv->eee_enabled = sxgbe_eee_init(priv); + if (!priv->eee_enabled) + return -EOPNOTSUPP; + + /* Do not change tx_lpi_timer in case of failure */ + priv->tx_lpi_timer = edata->tx_lpi_timer; + } + + return phy_ethtool_set_eee(priv->phydev, edata); +} + static const struct ethtool_ops sxgbe_ethtool_ops = { + .get_eee = sxgbe_ethtool_get_eee, + .set_eee = sxgbe_ethtool_set_eee, }; void sxgbe_set_ethtool_ops(struct net_device *netdev) diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c index ad6611f..93e2c64 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c @@ -55,6 +55,9 @@ #define SXGBE_DEFAULT_LPI_TIMER 1000 static int debug = -1; +static int eee_timer = SXGBE_DEFAULT_LPI_TIMER; + +module_param(eee_timer, int, S_IRUGO | S_IWUSR); module_param(debug, int, S_IRUGO | S_IWUSR); static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE | @@ -67,6 +70,97 @@ static irqreturn_t sxgbe_rx_interrupt(int irq, void *dev_id); #define SXGBE_COAL_TIMER(x) (jiffies + usecs_to_jiffies(x)) +#define SXGBE_LPI_TIMER(x) (jiffies + msecs_to_jiffies(x)) + +/** + * sxgbe_verify_args - verify the driver parameters. + * Description: it verifies if some wrong parameter is passed to the driver. + * Note that wrong parameters are replaced with the default values. + */ +static void sxgbe_verify_args(void) +{ + if (unlikely(eee_timer < 0)) + eee_timer = SXGBE_DEFAULT_LPI_TIMER; +} + +static void sxgbe_enable_eee_mode(const struct sxgbe_priv_data *priv) +{ + /* Check and enter in LPI mode */ + if (!priv->tx_path_in_lpi_mode) + priv->hw->mac->set_eee_mode(priv->ioaddr); +} + +void sxgbe_disable_eee_mode(struct sxgbe_priv_data * const priv) +{ + /* Exit and disable EEE in case of we are are in LPI state. */ + priv->hw->mac->reset_eee_mode(priv->ioaddr); + del_timer_sync(&priv->eee_ctrl_timer); + priv->tx_path_in_lpi_mode = false; +} + +/** + * sxgbe_eee_ctrl_timer + * @arg : data hook + * Description: + * If there is no data transfer and if we are not in LPI state, + * then MAC Transmitter can be moved to LPI state. + */ +static void sxgbe_eee_ctrl_timer(unsigned long arg) +{ + struct sxgbe_priv_data *priv = (struct sxgbe_priv_data *)arg; + + sxgbe_enable_eee_mode(priv); + mod_timer(&priv->eee_ctrl_timer, SXGBE_LPI_TIMER(eee_timer)); +} + +/** + * sxgbe_eee_init + * @priv: private device pointer + * Description: + * If the EEE support has been enabled while configuring the driver, + * if the GMAC actually supports the EEE (from the HW cap reg) and the + * phy can also manage EEE, so enable the LPI state and start the timer + * to verify if the tx path can enter in LPI state. + */ +bool sxgbe_eee_init(struct sxgbe_priv_data * const priv) +{ + bool ret = false; + + /* MAC core supports the EEE feature. */ + if (priv->hw_cap.eee) { + /* Check if the PHY supports EEE */ + if (phy_init_eee(priv->phydev, 1)) + return false; + + priv->eee_active = 1; + init_timer(&priv->eee_ctrl_timer); + priv->eee_ctrl_timer.function = sxgbe_eee_ctrl_timer; + priv->eee_ctrl_timer.data = (unsigned long)priv; + priv->eee_ctrl_timer.expires = SXGBE_LPI_TIMER(eee_timer); + add_timer(&priv->eee_ctrl_timer); + + priv->hw->mac->set_eee_timer(priv->ioaddr, + SXGBE_DEFAULT_LPI_TIMER, + priv->tx_lpi_timer); + + pr_info("Energy-Efficient Ethernet initialized\n"); + + ret = true; + } + + return ret; +} + +static void sxgbe_eee_adjust(const struct sxgbe_priv_data *priv) +{ + /* When the EEE has been already initialised we have to + * modify the PLS bit in the LPI ctrl & status reg according + * to the PHY link status. For this reason. + */ + if (priv->eee_enabled) + priv->hw->mac->set_eee_pls(priv->ioaddr, priv->phydev->link); +} + /** * sxgbe_clk_csr_set - dynamically set the MDC clock * @priv: driver private structure @@ -168,6 +262,9 @@ static void sxgbe_adjust_link(struct net_device *dev) if (new_state & netif_msg_link(priv)) phy_print_status(phydev); + + /* Alter the MAC settings for EEE */ + sxgbe_eee_adjust(priv); } /** @@ -700,7 +797,7 @@ static void sxgbe_tx_queue_clean(struct sxgbe_tx_queue *tqueue) * @priv: driver private structure * Description: it reclaims resources after transmission completes. */ -static void sxgbe_tx_all_clean(struct sxgbe_priv_data *priv) +static void sxgbe_tx_all_clean(struct sxgbe_priv_data * const priv) { u8 queue_num; @@ -708,6 +805,11 @@ static void sxgbe_tx_all_clean(struct sxgbe_priv_data *priv) struct sxgbe_tx_queue *tqueue = priv->txq[queue_num]; sxgbe_tx_queue_clean(tqueue); } + + if ((priv->eee_enabled) && (!priv->tx_path_in_lpi_mode)) { + sxgbe_enable_eee_mode(priv); + mod_timer(&priv->eee_ctrl_timer, SXGBE_LPI_TIMER(eee_timer)); + } } /** @@ -789,6 +891,7 @@ static int sxgbe_get_hw_features(struct sxgbe_priv_data * const priv) features->multi_macaddr = SXGBE_HW_FEAT_MACADDR_COUNT(rval); features->tstamp_srcselect = SXGBE_HW_FEAT_TSTMAP_SRC(rval); features->sa_vlan_insert = SXGBE_HW_FEAT_SRCADDR_VLAN(rval); + features->eee = SXGBE_HW_FEAT_EEE(rval); } /* Read First Capability Register CAP[1] */ rval = priv->hw->mac->get_hw_feature(priv->ioaddr, 1); @@ -1008,6 +1111,20 @@ static int sxgbe_open(struct net_device *dev) goto init_error; } + /* If the LPI irq is different from the mac irq + * register a dedicated handler + */ + if (priv->lpi_irq != dev->irq) { + ret = devm_request_irq(priv->device, priv->lpi_irq, + sxgbe_common_interrupt, + IRQF_SHARED, dev->name, dev); + if (unlikely(ret < 0)) { + netdev_err(dev, "%s: ERROR: allocating the LPI IRQ %d (%d)\n", + __func__, priv->lpi_irq, ret); + goto init_error; + } + } + /* Request TX DMA irq lines */ SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) { ret = devm_request_irq(priv->device, @@ -1063,6 +1180,9 @@ static int sxgbe_open(struct net_device *dev) priv->hw->dma->rx_watchdog(priv->ioaddr, SXGBE_MAX_DMA_RIWT); } + priv->tx_lpi_timer = SXGBE_DEFAULT_LPI_TIMER; + priv->eee_enabled = sxgbe_eee_init(priv); + napi_enable(&priv->napi); netif_start_queue(dev); @@ -1088,6 +1208,9 @@ static int sxgbe_release(struct net_device *dev) { struct sxgbe_priv_data *priv = netdev_priv(dev); + if (priv->eee_enabled) + del_timer_sync(&priv->eee_ctrl_timer); + /* Stop and disconnect the PHY */ if (priv->phydev) { phy_stop(priv->phydev); @@ -1181,6 +1304,9 @@ static netdev_tx_t sxgbe_xmit(struct sk_buff *skb, struct net_device *dev) /* get the spinlock */ spin_lock(&tqueue->tx_lock); + if (priv->tx_path_in_lpi_mode) + sxgbe_disable_eee_mode(priv); + if (unlikely(sxgbe_tx_avail(tqueue, tx_rsize) < nr_frags + 1)) { if (!netif_tx_queue_stopped(dev_txq)) { netif_tx_stop_queue(dev_txq); @@ -1459,6 +1585,25 @@ static void sxgbe_tx_timeout(struct net_device *dev) */ static irqreturn_t sxgbe_common_interrupt(int irq, void *dev_id) { + struct net_device *netdev = (struct net_device *)dev_id; + struct sxgbe_priv_data *priv = netdev_priv(netdev); + int status; + + status = priv->hw->mac->host_irq_status(priv->ioaddr, &priv->xstats); + /* For LPI we need to save the tx status */ + if (status & TX_ENTRY_LPI_MODE) { + priv->xstats.tx_lpi_entry_n++; + priv->tx_path_in_lpi_mode = true; + } + if (status & TX_EXIT_LPI_MODE) { + priv->xstats.tx_lpi_exit_n++; + priv->tx_path_in_lpi_mode = false; + } + if (status & RX_ENTRY_LPI_MODE) + priv->xstats.rx_lpi_entry_n++; + if (status & RX_EXIT_LPI_MODE) + priv->xstats.rx_lpi_exit_n++; + return IRQ_HANDLED; } @@ -1939,6 +2084,9 @@ struct sxgbe_priv_data *sxgbe_dvr_probe(struct device *device, priv->ioaddr = addr; priv->dev->base_addr = (unsigned long)addr; + /* Verify driver arguments */ + sxgbe_verify_args(); + /* Init MAC and get the capabilities */ ret = sxgbe_hw_init(priv); if (ret) @@ -2112,7 +2260,21 @@ module_exit(sxgbe_exit); #ifndef MODULE static int __init sxgbe_cmdline_opt(char *str) { + char *opt; + + if (!str || !*str) + return -EINVAL; + while ((opt = strsep(&str, ",")) != NULL) { + if (!strncmp(opt, "eee_timer:", 6)) { + if (kstrtoint(opt + 10, 0, &eee_timer)) + goto err; + } + } return 0; + +err: + pr_err("%s: ERROR broken module parameter conversion\n", __func__); + return -EINVAL; } __setup("sxgbeeth=", sxgbe_cmdline_opt); @@ -2123,6 +2285,7 @@ __setup("sxgbeeth=", sxgbe_cmdline_opt); MODULE_DESCRIPTION("SAMSUNG 10G/2.5G/1G Ethernet PLATFORM driver"); MODULE_PARM_DESC(debug, "Message Level (-1: default, 0: no output, 16: all)"); +MODULE_PARM_DESC(eee_timer, "EEE-LPI Default LS timer value"); MODULE_AUTHOR("Siva Reddy Kallam "); MODULE_AUTHOR("ByungHo An "); diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c index 6a8549e..b58e8e8 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c @@ -161,6 +161,10 @@ static int sxgbe_platform_probe(struct platform_device *pdev) } } + priv->lpi_irq = irq_of_parse_and_map(dev->of_node, loop++); + if (priv->lpi_irq == -ENXIO) + priv->lpi_irq = priv->dev->irq; + platform_set_drvdata(pdev, priv->dev); pr_debug("platform driver registration completed\n"); diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h index d1cd9ac..85a7b31 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h @@ -25,6 +25,11 @@ #define SXGBE_CORE_HASH_TABLE_REG5 0x0024 #define SXGBE_CORE_HASH_TABLE_REG6 0x0028 #define SXGBE_CORE_HASH_TABLE_REG7 0x002C + +/* EEE-LPI Registers */ +#define SXGBE_CORE_LPI_CTRL_STATUS 0x00D0 +#define SXGBE_CORE_LPI_TIMER_CTRL 0x00D4 + /* VLAN Specific Registers */ #define SXGBE_CORE_VLAN_TAG_REG 0x0050 #define SXGBE_CORE_VLAN_HASHTAB_REG 0x0058