diff mbox series

[v3,6/9] spi: spi-s3c64xx: Fix doc comment for struct s3c64xx_spi_driver_data

Message ID 20201002122243.26849-7-l.stelmach@samsung.com
State Accepted
Commit 58d54781433f4e02f598e794e1fdb29c3ac07fa1
Headers show
Series [v3,1/9] spi: spi-s3c64xx: swap s3c64xx_spi_set_cs() and s3c64xx_enable_datapath() | expand

Commit Message

Lukasz Stelmach Oct. 2, 2020, 12:22 p.m. UTC 
Remove descriptions for non-existent fields and fix indentation.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
---
 drivers/spi/spi-s3c64xx.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 13b53f9a5c3e..f85f40fd608c 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -162,11 +162,8 @@  struct s3c64xx_spi_port_config {
  * @cntrlr_info: Platform specific data for the controller this driver manages.
  * @lock: Controller specific lock.
  * @state: Set of FLAGS to indicate status.
- * @rx_dmach: Controller's DMA channel for Rx.
- * @tx_dmach: Controller's DMA channel for Tx.
  * @sfr_start: BUS address of SPI controller regs.
  * @regs: Pointer to ioremap'ed controller registers.
- * @irq: interrupt
  * @xfer_completion: To indicate completion of xfer task.
  * @cur_mode: Stores the active configuration of the controller.
  * @cur_bpw: Stores the active bits per word settings.
@@ -183,7 +180,7 @@  struct s3c64xx_spi_driver_data {
 	struct clk                      *ioclk;
 	struct platform_device          *pdev;
 	struct spi_master               *master;
-	struct s3c64xx_spi_info  *cntrlr_info;
+	struct s3c64xx_spi_info         *cntrlr_info;
 	spinlock_t                      lock;
 	unsigned long                   sfr_start;
 	struct completion               xfer_completion;