diff mbox series

mac80211: allow configured beacon tx rate to driver

Message ID 1601762658-15627-1-git-send-email-rmanohar@codeaurora.org
State New
Headers show
Series mac80211: allow configured beacon tx rate to driver | expand

Commit Message

Rajkumar Manoharan Oct. 3, 2020, 10:04 p.m. UTC
The user is allowed to change beacon tx rate (HT/VHT/HE) from hostapd.
This information needs to be passed to the driver when the rate control
is offloaded to the firmware. The driver capability of allowing beacon
rate is already validated by hostapd, so simply passing the rate
information to the driver is enough.

Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
---
 include/net/mac80211.h | 3 +++
 net/mac80211/cfg.c     | 3 +++
 2 files changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 4747d446179a..e8e295dae744 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -628,6 +628,8 @@  struct ieee80211_fils_discovery {
  * @unsol_bcast_probe_resp_interval: Unsolicited broadcast probe response
  *	interval.
  * @s1g: BSS is S1G BSS (affects Association Request format).
+ * @beacon_tx_rate: The configured beacon transmit rate that needs to be passed
+ *	to driver when rate control is offloaded to firmware.
  */
 struct ieee80211_bss_conf {
 	const u8 *bssid;
@@ -698,6 +700,7 @@  struct ieee80211_bss_conf {
 	struct ieee80211_fils_discovery fils_discovery;
 	u32 unsol_bcast_probe_resp_interval;
 	bool s1g;
+	struct cfg80211_bitrate_mask beacon_tx_rate;
 };
 
 /**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index da70f174d629..e3334afa85b0 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1153,6 +1153,9 @@  static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
 		}
 	}
 
+	if (ieee80211_hw_check(&local->hw, HAS_RATE_CONTROL))
+		sdata->vif.bss_conf.beacon_tx_rate = params->beacon_rate;
+
 	err = ieee80211_assign_beacon(sdata, &params->beacon, NULL);
 	if (err < 0)
 		goto error;