diff mbox

[v1,08/19] drm: sti: add sti layer interface definition

Message ID 1396959566-2960-9-git-send-email-benjamin.gaignard@linaro.org
State New
Headers show

Commit Message

Benjamin Gaignard April 8, 2014, 12:19 p.m. UTC
STI hardware have various input sub-devices before mixing block.
Each type of sub-device have different capabilities for scaling,
filtering or accepted pixel format.
This layer interface abstract those differences and make the interaction
with compositor more simple.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
---
 drivers/gpu/drm/sti/sti_layer.h | 104 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 104 insertions(+)
 create mode 100644 drivers/gpu/drm/sti/sti_layer.h
diff mbox

Patch

diff --git a/drivers/gpu/drm/sti/sti_layer.h b/drivers/gpu/drm/sti/sti_layer.h
new file mode 100644
index 0000000..ed8386a
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_layer.h
@@ -0,0 +1,104 @@ 
+/*
+ * Copyright (C) STMicroelectronics SA 2013
+ * Authors: Benjamin Gaignard <benjamin.gaignard@st.com>
+ *          Fabien Dessenne <fabien.dessenne@st.com>
+ *          for STMicroelectronics.
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+#ifndef _STI_LAYER_H_
+#define _STI_LAYER_H_
+
+#include <drm/drmP.h>
+
+#define to_sti_layer(x) container_of(x, struct sti_layer, plane)
+
+#define STI_LAYER_TYPE_SHIFT 8
+#define STI_LAYER_TYPE_MASK (~((1<<STI_LAYER_TYPE_SHIFT)-1))
+
+
+enum sti_layer_type {
+	STI_GDP = 1 << STI_LAYER_TYPE_SHIFT,
+	STI_VID = 2 << STI_LAYER_TYPE_SHIFT,
+	STI_CUR = 3 << STI_LAYER_TYPE_SHIFT,
+	STI_BCK = 4 << STI_LAYER_TYPE_SHIFT
+};
+
+enum sti_layer_id_of_type {
+	STI_ID_0 = 0,
+	STI_ID_1 = 1,
+	STI_ID_2 = 2,
+	STI_ID_3 = 3
+};
+
+enum sti_layer_desc {
+	STI_GDP_0	= STI_GDP | STI_ID_0,
+	STI_GDP_1	= STI_GDP | STI_ID_1,
+	STI_GDP_2	= STI_GDP | STI_ID_2,
+	STI_GDP_3	= STI_GDP | STI_ID_3,
+	STI_VID_0	= STI_VID | STI_ID_0,
+	STI_VID_1	= STI_VID | STI_ID_1,
+	STI_CURSOR	= STI_CUR,
+	STI_BACK	= STI_BCK
+};
+
+struct sti_fps_info {
+	bool output;
+	int curr_frame_counter;
+	int last_frame_counter;
+	struct timespec last_timestamp;
+};
+
+/*
+ * STI layer structure
+ *
+ * @plane:		drm plane it is bound to (if any)
+ * @fb:			drm fb it is bound to
+ * @mode:		display mode
+ * @desc:		layer type & id
+ * @zorder:		layer z-order
+ * @enabled:		to know if the layer is active or not
+ * @src_x src_y:	coordinates of the input (fb) area
+ * @src_w src_h:	size of the input (fb) area
+ * @dst_x dst_y:	coordinates of the output (crtc) area
+ * @dst_w dst_h:	size of the output (crtc) area
+ * @format:		format
+ * @pitches:		pitch of 'planes' (eg: Y, U, V)
+ * @offsets:		offset of 'planes'
+ * @paddr:		physical address of the input buffer
+ * @fps_info:		frame per second info
+ */
+struct sti_layer {
+	struct drm_plane plane;
+	struct drm_framebuffer *fb;
+	struct drm_display_mode *mode;
+	enum sti_layer_desc desc;
+	int zorder;
+	bool enabled;
+	int src_x, src_y;
+	int src_w, src_h;
+	int dst_x, dst_y;
+	int dst_w, dst_h;
+	uint32_t format;
+	int pitches[4];
+	int offsets[4];
+	dma_addr_t paddr;
+	struct sti_fps_info fps_info;
+};
+
+struct sti_layer *sti_layer_create(struct device *dev, int desc,
+			void __iomem *baseaddr);
+int sti_layer_prepare(struct sti_layer *layer, struct drm_framebuffer *fb,
+			struct drm_display_mode *mode,
+			int dest_x, int dest_y,
+			int dest_w, int dest_h,
+			int src_x, int src_y,
+			int src_w, int src_h);
+int sti_layer_commit(struct sti_layer *layer);
+int sti_layer_disable(struct sti_layer *layer);
+const uint32_t *sti_layer_get_formats(struct sti_layer *layer);
+int sti_layer_get_nb_formats(struct sti_layer *layer);
+struct sti_layer *sti_layer_find_layer(struct sti_layer *layer[],
+			enum sti_layer_desc desc);
+const char *sti_layer_to_str(struct sti_layer *layer);
+#endif